• 한국음향학회지
• /
• 제32권5호
• /
• pp.402-407
• /
• 2013

본 논문은 인접한 두 격실의 매질이 다를 때 공통 벽을 통한 음파의 전파를 해석한 내용을 다루었다. 통계적 에너지해석법(statistical energy energy)을 사용하여 두 격실의 음향에너지와 벽의 진동에너지간의 에너지 평형을 고려하였으며 소음원실의 음압이 벽을 투과하는 성분 외에 벽의 구조소음으로 인한 음의 방사(radiation)가 수음원실의 음압에 미치는 영향을 검토하였다. 예제로 선박의 엔진실과 물탱크가 크기 $8.4{\times}4$ m인 강판을 사이에 두고 접한 경우를 해석하였다. 강판의 임계주파수(critical frequency)가 관심주파수대역보다 큰 경우 63 Hz이하의 저주파수대역을 제외하고 음파의 전달은 강판을 투과하는 성분에 의해 주로 결정되며 강판의 구조소음에 기인한 방사소음은 무시할 정도로 기여도가 작음을 확인하였다.

• 중환자간호학회지
• /
• 제3권2호
• /
• pp.25-35
• /
• 2010

Purpose: The purpose of this pilot study was to investigate the effect of oral care using 0.1% chlorhexidine and tantum solution on oral status and incidence of oral pathogens among intubated ICU patients. Methods: The study subjects were 26 intubated patients of MICU in a university hospital. Oral care was provided with 0.1% chlorhexidine solution to the experimental group (n=12) and with tantum solution to the control group (n=14), 3 times a day for 6 days. After the intervention, the oral status of each subject was checked using structured method, and oral swab culture was done to count colonized bacterial pathogens. Results: The mean oral status score of experimental group was significantly higher than that of control group (U=42.50, p=.031). The mean incidence of oral pathogens in experimental group was smaller than that of control group, but the difference was not statistically significant. Conclusion: The oral care with 0.1% chlorhexidine solution is more effective than with tantum solution for improving oral status of intubated ICU patients. However, additional studies with larger sample size will be needed to figure out it's effects on the incidence of oral pathogens.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.178-189
• /
• 1989

본 연구에서는 우선 승용차의 1/10 모형의 형상을 더욱 단순화시킨 2차원 자동차형 물체를 대상으로 하여 그 주위의 압력, 속도 및 난류량의 분포를 측정하고, 또한 울터프트(wool tuft)를 이용한 유동가시화법으로 후류구조를 파악함으로써 향후 계속될 실험적 및 수치해석적 연구의 기초를 마련하고자 한다.

• 공업화학
• /
• 제20권6호
• /
• pp.685-691
• /
• 2009

하이드록시기 유무, 극성도, 분자 크기가 서로 다른 용매 6종의 단일 용매 또는 혼합 용매계 흄드 실리카 분산체를 제조하고 각 분산체의 점도 및 유변학적 거동을 용매계의 특성의 관점에서 고찰하였다. 하이드록시기 포함 용매에 실리카를 분산하였을 때 안정적이고 저점도의 sol을 형성하였고 하이드록시기가 없고 비극성인 용매는 고점도의 gel을 형성하였다. 비극성 용매계 실리카 분산체에 하이드록시기 함유 용매를 첨가하면 일정 함량까지는 점도 감소 현상을 관찰할 수 있었으며, 더 이상의 점도 변화가 발생하지 않는 최소 임계함량이 있었다. 최소 임계함량은 하이드록시기 미포함 용매의 극성도가 클수록 줄어들었다. 하이드록시기 포함 용매계 실리카 분산체가 안정적인 저점도의 sol을 형성하는데 이는 실리카 표면의 실란올기와 용매의 하이드록시기간의 수소결합을 통한 용매화로 저점도 sol을 형성하는 것으로 볼 수 있다. 비극성용매에 실리카를 분산하였을 때는 실리카 표면의 실란올기 사이의 수소 결합을 통해 응집이 일어나 고점도의 gel이 형성되었다.

• Steel and Composite Structures
• /
• 제22권6호
• /
• pp.1417-1443
• /
• 2016

Cellular and castellated steel beams are used to obtain higher stiffness and bending capacity using the same weight of steel. In addition, the beam openings may be used as a pass for different mechanical fixtures such as ducts and pipes. The aim of this study is to investigate the effect of different parameters on both elastic and inelastic critical buckling stresses of steel web plates with openings. These parameters are plate aspect ratio; opening shape (circular or rectangular); end distance to the first opening; opening spacing; opening size; plate slenderness ratio; steel grade; and initial web imperfection. The web/flange interaction has been simplified by web edge restraints representing simply supported boundary conditions. A numerical parametric study has been performed through linear and nonlinear finite element (FE) models, where the FE results have been verified against both experimental and numerical results in the literature. The web plates are subject to in-plane linearly varying compression with different loading patterns, ranging from uniform compression to pure bending. A buckling stress modification factor (${\beta}$-factor) has been introduced as a ratio of buckling stress of web plate with openings to buckling stress of the corresponding solid web plate. The variation of ${\beta}$-factor against the aforementioned parameters has been reported. Furthermore, the critical plate slenderness ratio separating elastic buckling and yielding has been identified and discussed for two steel grades of DIN-17100, namely: ST-37/2 and ST-52/3. The FE results revealed that the minimum ${\beta}$-factor is 0.9 for web plates under uniform compression and 0.7 for those under both compression and tension.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1139-1148
• /
• 2000

산업 폐기물 중 다량으로 발생하는 제강슬래그의 재활용을 위하여 -14/+24mesh 정도 크기의 슬래그를 미분말로 분쇄시 최적 조건을 조사하고 경제적인 분쇄조건을 확립하기 위하여 요구되는 동력을 산출하였다. 이를 위한 분쇄조건으로 ball mill의 회전속도, 분쇄시간, ball의 충진량, 시료의 충진량과 크기 등을 선정하였고 이에 대한 분쇄효율을 산출하였다. 본 연구에서는 임계회전속도의 79% 정도에 해당되는 값이 최적의 회전속도인 것으로 조사되었다. 분쇄시간에 따른 분쇄정도는 일반적으로 시간이 증가함에 따라 증가하는 것으로 나타났지만 분쇄 초기에 비해 분쇄가 더 진행될수록 분쇄효율은 감소하는 것으로 나타났다. Ball의 충진율은 mill내부 용량의 50%인 경우에 최척의 분쇄효율을 보였고, 시료의 충진량과 크기에 따른 입도초사 실험 에서는 시료의 충진량이 적고 원시료의 크기가 작을수록 분쇄정도는 증가하였다. 위의 결과에 의해 Bond의 식을 사용하여 동력효율을 계산한 결과 분쇄시간이 길수록 그리고 회전속도가 최적인 조건에서 동력효율이 가장 크게 나타나고 있음이 관찰되었다.

• 한국가금학회지
• /
• 제7권2호
• /
• pp.18-27
• /
• 1980

IBDV는 양계업이 전업화된 모든지역에서 발생하고 있다. 이 질병의 임상증상은 매우 특징적이기도 하지만 IBDV 감염시의 닭의 연령 또는 바이러스의 병원성에 따라 임상증상 업이 내과 하기도 한다. IBDV에 의한 BF의 종장이나 출혈성 병변은 감염 후 짧은 기간에만 관할되며 질병이 경과함에 따라 BF는 위축된다. IBDV는 감염력이 극히 높으며, 오염된 계분, 사료, 물 등에 의하여 전파된다. 이 바이러스는 외계 환경에 대하여 극히 높은 저항성을 갖고 있으며 Ribovirus군의 Diplorna 바이러스로서 크기는 55-60nm이다. IBDV는 계태아나 계태아 조직 또는 감수성이 있는 닭의 BF에서 용이하게 증식시킬 수 있다. agar gel을 사용한 면역 확산법은 IBDV 감염을 진단할 수 있는 가장 간편한 방법이다. IBDV에 대한 항체는 감염 후 1주일 후부터 증명되며 장기간 지속된다. 감수성 계군일 경우 높은 역가의 항체형성이나 지속은 계군의 연령에 비례한다. IBDV에 대한 모체이행 항체는 critical age때의 병아리를 야외 감염으로부터 보호하여 준다. IBDV 단독 감염에 의한 IBD 피해는 경미한 것이지만 면역부전증에 의하여 유발되는 복합성 질병인 Inclusion body hepatitis, 전염성 빈혈, 괴저성 피부염 등은 닭의 생산성을 크게 저하시킨다.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제2권2호
• /
• pp.97-109
• /
• 2015

A series of amphiphilic graft copolymers were synthesized by varying the number of graft chains and graft chain lengths. The polarity of the hydrophobic graft chain on the copolymers was varied their solution properties. The glass transition temperature of the copolymers was in the low-temperature region, because of the amorphous nature of poly (trimethylene carbonate) (PTMC). The surface morphology of the lyophilized colloid gel had a bundle structure, which was derived from the combination of poly(N-hydroxyethylacrylamide)( poly(HEAA)) and PTMC. The solution properties were evaluated using dynamic light scattering and fluorescence measurements. The particle size of the graft copolymers was about 30-300 nm. The graft copolymers with a higher number of repeating units attributed to the TMC (trimethylene carbonate) component and with a lower macromonomer ratio showed high thermal stability. The critical association concentration was estimated to be between $2.2{\times}10^{-3}$ and $8.9{\times}10^{-2}mg/mL$, using the pyrene-based fluorescence probe technique. These results showed that the hydrophobic chain of the graft copolymer having a long PTMC segment had a low polarity, dependent on the number of repeating units of TMC and the macromonomer composition ratio. These results demonstrated that a higher number of repeating units of TMC, with a lower macromonomer composition, was preferable for molecular encapsulation.

• STI Policy Review
• /
• 제1권4호
• /
• pp.41-61
• /
• 2010

The Korean government's support towards the establishment of leading research hubs at universities began with the initiation of the Science/ Engineering Research Center in 1990. Such efforts to provide support to research organizations have continued for some twenty years in various forms, which implies that building research hubs was critical in acquiring global leadership in research. However, the effect of such research hub nurturing policies has never been properly evaluated, apart from an assessment of their validity. Therefore, this paper analyzes how major programs to form research groups by providing assistance to joint research by researchers at universities are operated, and the characteristics of such programs through comparative analysis with other programs. There are two major focal points in the analysis: the first is the evaluation of the level of differentiation between Research Organization Support Programs (ROP) and other R&D Programs from an efficiency perspective, and the second is an examination of the extent of systematization of research organizations that exist at universities and impact of Research Organization Support Programs on the activities of participating professors from an effectiveness perspective. The result showed that the ROP were no longer only relevant for the formation and maintenance of research groups. Other R&D Programs are growing increasingly larger in scale and conducted over longer periods of time. Thus, the ROP can no longer be differentiated from other programs in research period and size of funding. An analysis on the effect of ROP demonstrated that all activities by participating professors in organizations that were the beneficiaries of group research assistance were more active compared to their counterparts in organizations that received other research support, but there was little difference in the elements of systematization. This implies that the joint research conducted at universities is not systematized and that it is still research based on individual themes but conducted jointly. In addition, it also means that the ROP is failing to effectively lead the systematization of research. In other words, today, university research organizations are not operated as independent, long-term bodies, but are more relevant as a combination of research units of individual professors.

• 한국전산유체공학회지
• /
• 제3권1호
• /
• pp.82-88
• /
• 1998

As a par of a project related to the development of the design algorithm of a compact heat exchanger for the application of the electronic home appliances, the effect of the discreteness of the airflow boundary generated on the cooling fin surface on the heat transfer and pressure drop characteristics of the heat exchanger was studied numerically. In general, there are two critical design parameters seriously considered in the design of the heat exchanger; heat transfer rate(Q) and pressure drop coefficient(C/sub p/). Even though the higher heat transfer rate with lower pressure drop characteristics is required in a design of the heat exchanger, it is not an easy job to satisfy both conditions at the same time because these two parameters are phenomenally inversely proportional. To control the boundary layer thickness and its length along the streamline, the surface of the flat fin was modified to accelerate the heat transfer rate on the fin surface. To understand the effect of the discreted fin size(S/sub w/) and its location(S/sub h/) on the performance of the heat exchanger in the airflow field, the flat fin was modified as shown in Fig. 1. From this study, it was found that the smaller and more number of slits on the fin surface showed the higher energy diffusion rate. It means that the discreteness of the boundary layer is quite important on the heat transfer rate of the heat exchanger. On the other hand, if the fin surface configuration is very complex than needed, higher static pressure drop occurs than required in a system and it may be a reason of the induced aerodynamic noise in the heat exchanger.