• 제목/요약/키워드: Critical moisture content

검색결과 85건 처리시간 0.026초

반도체 패키지 봉지재용 에폭시 수지 조성물의 신뢰특성에 미치는 실리카 고충전 영향 (Effect of High Filler Loading on the Reliability of Epoxy Holding Compound for Microelectronic Packaging)

  • 정호용;문경식;최경세
    • 마이크로전자및패키징학회지
    • /
    • 제6권3호
    • /
    • pp.51-63
    • /
    • 1999
  • 무기 충전제를 고충전시킨 에폭시 수지 조성물이 반도체 패키지의 신뢰성에 미치는 영향을 검토하였다. Ouchiyama 등의 모델로부터 최대충전밀도를 향상시킴으로써 고충전을 달성할 수 있는 방법을 제시할 수 있었으며, 최대충전밀도가 증가함에 따라 에폭시 수지 조성물의 점도가 감소하였고, 흐름성이 개선되었다. 충전제 함량이 증가함에 따라 흡습 특성이 향상되었고 열팽창계수를 낮춤으로써 저응력화를 달성할 수 있었으나, 임계 충전제 함량 이상에서는 금속 리드프레임과의 접착강도가 저하되었다. 따라서 에폭시 수지 조성물의 균형 있는 신뢰 특성을 얻기 위해서는 충전제 함량을 적정하게 선택해야 하며, 충전량을 더욱 높여 고신뢰성을 얻기 위해서는 최적의 충전제 조합을 선정하여야 함을 알 수 있었다.

  • PDF

토양(土壤)의 경도(硬度)가 완두뿌리의 신장(伸長)에 미치는 영향(影響) (A Study on Penetration of Pea Seedling Taproots as Influenced by strength of Soil)

  • 조인상;조성진;임정남
    • 한국토양비료학회지
    • /
    • 제10권1호
    • /
    • pp.7-12
    • /
    • 1977
  • 작물생육(作物生育)과 토양물리성(土壤物理性)과의 관계(關係)를 구명(究明)코져 우리나라의 대표적(代表的) 밭토양(土壤)인 상주(尙州) 사양토(砂壤土), 연곡(延谷) 양토(壤土), 화동(華東) 미사질(微砂質) 식양토(埴壤土)를 갖이고 수분함량(水分含量)과 가비중(假比重)을 달리하여 Core를 만들어서 토양(土壤)의 경도(硬度)와 완두뿌리의 신장속도(伸長速度)를 측정(測定)하였던 바 그 결과(結果)는 다음과 같다. 1. 토양경도(土壤硬度)는 가비중(假比重)이 증가(增加)할수록 커지며, 수분함량(水分含量)이 많을수록 가비중(假比重) 증가(增加)에 따른 경도변화(硬度變化)는 적어진다. 2. 동일(同一)한 수분함량(水分含量)에서 뿌리의 신장(伸長)과 가비중(假比重)과는 고도(高度)의 상관(相關)을 보여 주었으며 그 기울기는 수분함량(水分含量)이 적을수록 컸다. 3. 완두뿌리의 신장(伸長)은 경도(硬度)(Yamanaka 경도계(硬度計) 및 침경도계(針硬度計))가 증가(增加)할수록 감소(減少)되었으며, 두 인자(因子)간에는 고도(高度)의 유의(有意)한 상관(相關)이 있었다. 4. 완두생육에 있어서 최저(最低) 뿌리 신장속도(伸長速度)를 0.3mm/hr(최대신장속도(最大伸長速度)의 약(約) ${\frac{1}{4}}$에 해당(該當))라고 보면 금속침(金屬針)에 의한 토양경도(土壤硬度) $21kg/cm^2$, Yamanaka경도(硬度) 24mm이 완두재배(栽培)에 있어 한계경도(限界硬度)라고 볼 수 있다.

  • PDF

라돈 저감형 기능성 보드제작을 위한 흡착재의 라돈 저감 성능 (Radon Reduction Performance of Adsorbent for Making Radon-Reducing Functional Board)

  • 김기훈;편수정;김연호;이상수
    • 한국건축시공학회지
    • /
    • 제19권2호
    • /
    • pp.139-147
    • /
    • 2019
  • 본 연구는 최근 방사능 물질의 위험성에 대한 관심이 커지며 원전사고 등의 대규모 인명 피해와 위험지역 선정 등의 이유로 인체의 방사능 안전성에 대한 관심이 커지면서 요구되는 실내 건축용 마감재에 대한 것이다. 일상에서 방사능에 노출되는 여러 가능성 중 실내 공기 중 라돈가스에 대한 관심이 커지면서 라돈가스 흡착형 경화체에 대한 기초연구 자료를 제시한다. 본 연구에 흡착재로 활용된 재료는 규조토와 실리카겔로, 천연 흡착재인 규조토와 인공 흡착재인 실리카겔의 기초 성능 및 흡착 성능을 평가하였다. 향후 실내 공기 중 라돈가스 농도 저감에 대한 정밀한 추가 실험에 대한 연구결과가 필요할 것으로 예상되고, 실험결과에 따른 인공 흡착재인 실리카겔의 라돈가스 흡착 가능성을 기대한다.

집성재의 접착층수에 따른 치수안정성 (Dimension Stability by Bonding Layers of Glulam)

  • 황권환;박주생
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.88-95
    • /
    • 2008
  • 내구성과 관련하여 구조부재의 수축문제가 목구조에서는 커다란 관심사가 되고 있다. 특히, 목재 소재를 적극 활용하는 전통공법에서는 짜맞춤 부위, 부재와 벽 등에서 발생하는 건조수축에 의한 갈라짐 등의 결함이 더욱 문제시되고 있다. 또한, 최근 기둥-보 공법에서 많이 사용되고 있는 국내산 낙엽송 집성재의 이용에 있어서도 함수율변화로 인한 수축과 팽윤에 대한 검토를 행할 필요성이 제기되고 있다. 낙엽송 소재와 접착층수를 달리한 낙엽송 집성재의 시험편에 대해 다양한 함수율상태에서의 치수변화율을 살펴보았다. 건조수축에 의한 치수변화 억제효과는 3층 이상의 접착층을 가지는 시험편에서 그 효과가 현저함을 알 수 있었다. 그리하여, 소재를 사용할 경우 최종사용조건에 맞추어 건조를 충분히 행하거나, 구조부재로 집성재를 이용함으로써 건조수축 문제를 어느 정도 해결할 수 있는 것으로 판명되었다.

MOD-TFA공정에 의한 YBCO박막 제조 시 cerium첨가효과에 관한 연구 (Effect of Cerium Doping on Superconducting Properties of YBCO Film Prepared by TFA-MOD Method)

  • 이금영;권연경;김병주;안지현;이종범;김호진;이희균;홍계원;유재무;이형철
    • Progress in Superconductivity
    • /
    • 제8권1호
    • /
    • pp.87-92
    • /
    • 2006
  • The effects of Ba and Ce addition has been investigated in YBCO prepared by trifluoroacetate(TFA) metalorganic depostition(MOD) method. Precursor solutions with cation ratios of Y:Ba:Cu:Ce=1:2+x:3:x(x=0, 0.05, 0.1 and 1.5) have been prepared by adding an excess amount of cerium and barium. Coated film was calcined at lower temperature under a moisture-containing oxygen atmosphere. Superconducting YBCO films have been obtained by performing conversion heat treatment at temperature of $780{\sim}810^{\circ}C$ under a moisture-containing Ar(1,000 ppm oxygen) atmosphere. It has been shown that the critical current($I_c$) of YBCO film was degraded by doping of Ba and Ce atoms. But $I_c$ was increased as the amount of doped Ba and Ce content increased from 5% to 15 %. It was observed that there was little increase of a flux pinning force with Ba and Ce addition in YBCO film prepared by TFA-MOD process.

  • PDF

Characteristics of Spectral Reflectance in Tidal Flats

  • Ryu, Joo-Hyung;Na, Young-Ho;Choi, Jong-Kook;Won, Joong-Sun
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
    • /
    • pp.734-738
    • /
    • 2002
  • We present spectral characteristics of tidal flat sediments and algal mat that were tested in the Gomso and Saemangum tidal flats, Korea. The objective of this study is to investigate the spectral reflectance and the radar scattering modeling in the tidal flats. Ground truth data obtained in the tidal flats include grain size, soil moisture content and its variation with time, surface roughness, chlorophyll, ground leveling, and field spectral reflectance measurement. The concept of an effective exposed area (EEA) is introduced to accommodate the effect of remnant surface water, and it seriously affects the reflection of short wavelength infrared and microwave. The nin size of 0.0625 mm has been normally used as a critical size of mud and sand discrimination. But we propose here that 0.25 mm is more practical grain size criterion to discriminate by remote sensing. Algal mat is the primary product in tidal flats, and it is found to be very important to understand spectral characteristics for tidal flat remote sensing. We have also conducted radar scattering modeling, and showed L-band HV-polarization would be the most effective combination.

  • PDF

아파트단지내 조경용 교목의 입지조건별 생장특성 (The Growth Patterns of Major Landscaping Trees by Site Conditions in Two Apartment Complexes)

  • 윤근영;안건용
    • 한국조경학회지
    • /
    • 제26권2호
    • /
    • pp.207-218
    • /
    • 1998
  • A site survey in two apartment complexes and a nursery experiment were carried out in this study to provide basic data of the long-pending growth characteristics of major landscaping trees, such as Picea abies, Pinus parviflora, Metasequoia glyptostroboides, Magnolia denudata, Acer buergerianum and Acer palmatum. According to the main results, the survival rates were very low, reflected by the average survival rate of the four species was 95% at the nursery site. And, it was presumed that the site conditions of two apartment complexes for tree growth were very inferior to those of the nursery site, taking into consideration that the increment percents of growth factors of the tree species at the nursery site were relatively higher than those of the apartment complexes. The distribution patterns of the current growth factors of trees showed a normal distribution. The regression equation of breast diameter on diameter at root collar showed especially high predictability. And, it was thought that the most critical limiting environmental factors on tree growth at the apartment complexes were found to be alkaline pH caused by excessive Ca, high percent base saturation, insufficiency of available moisture content, bad drainage due to inferior soil texture, high soil hardness, lack of organic matter and shortage of cation exchange capacity in soil.

  • PDF

국내 한약재의 유통상 품질 문제점과 포장표준화를 통한 대응방안 고찰 (A Review on Quality Control of Korean Medicinal Herbs Through Packaging Standardization)

  • 가진동;김재능;박수일;이윤석
    • 한국포장학회지
    • /
    • 제13권2호
    • /
    • pp.43-50
    • /
    • 2007
  • The production, distribution, and consumption of Korean medicinal herbs have increased every year because of an increase of health considerations. But there are no sufficient standardization procedures in packaging and distribution systems related to these herb products. The standardization of packaging material and dimension could be a good addition for establishing proper quality control methods for Korean medicinal herbs. Medicinal herbs deteriorate under physical, chemical and biological hazards such as oxidation, textural change under high moisture content, color change by light, sanitation problems by insect invasion and contamination. Packaging standardization with proper functional packaging materials is critical to ensure the qualities of medicinal herbs. Also, storage and distribution efficiencies can be improved by achieving packaging dimension standardization. This review summarizes recent research trends related to quality evaluation methods and major quality deterioration factors of Korean medicinal herbs. This paper also offers reviews on some of problems and challenges in current packaging and distribution systems of medicinal herb industries and briefly suggests advanced quality control methods through packaging standardization.

  • PDF

Flexible Low Power Consumption Active-Matrix OLED Displays

  • Hack, Mike;Chwang, Anna;Hewitt, Richard;Brown, Julie;Lu, JengPing;Shih, ChinWen;Ho, JackSon;Street, R.A.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
    • /
    • pp.609-613
    • /
    • 2005
  • Advanced mobile communication devices require a bright, high information content display in a small, light-weight, low power consumption package. In this paper we will outline our progress towards developing such a low power consumption active-matrix flexible OLED ($FOLED^{TM}$) display. Our work in this area is focused on three critical enabling technologies. The first is the development of a high efficiency long-lived phosphorescent OLED ($PHOLED{TM}$) device technology, which has now proven itself to be capable of meeting the low power consumption performance requirements for mobile display applications. Secondly, is the development of flexible active matrix backplanes, and for this our team are employing poly-Si TFTs formed on metal foil substrates as this approach represents an attractive alternative to fabricating poly-Si TFTs on plastic for the realization of first generation flexible active matrix OLED displays. Unlike most plastics, metal foil substrates can withstand a large thermal load and do not require a moisture and oxygen permeation barrier. Thirdly, the key to reliable operation is to ensure that the organic materials are fully encapsulated in a package designed for repetitive flexing. We also present progress in operational lifetime of encapsulated T-PHOLED pixels on planarized metal foil and discuss PHOLED encapsulation strategy.

  • PDF

감마선 조사된 백삼의 생물학적 품질 및 저장특성 (Biological Quality and Storage Characteristics of Gamma-Irradiated Whilte Ginseng)

  • 권중호;변명우;이수정;이수정;정형욱
    • 한국식품영양과학회지
    • /
    • 제28권1호
    • /
    • pp.40-46
    • /
    • 1999
  • Microbiological quality of commercial white ginseng was examined, together with investigation on its water absorption pattern and radiosensitivity of molds isolated from the samples. Comparative effects of phosphine fumigation and gamma irradiation on microbial control and disinfestation of the samples packed in a commercial laminated film and stored for six months at ambient(20oC, 70% RH) and accelerated(40oC, 90% RH) conditions were studied. Commercial white ginseng was contaminated with coliforms by 103~104CFU/g and molds by 102~104CFU/g and thus decontamination process was required for hygienic quality and storage stability. Phosphine fumigation showed no sterilizing effects on microbes contaminated, while gamma irradiation at around 5kGy was effective for decontaminating microorganisms, showing D10 values of 0.48~0.60kGy for isolated molds. Even though the storage insects, Plodia interpuctella Hubner and Lasioderma serricorne(cigarette beetle) were easily destroyed by phosphine fumigation, gamma irradiation less than 5kGy was found effective for both purposes to improve biological quality of stored white ginseng, thereby extending the storage life of packed samples resulting from increased critical moisture content by about 1%(Aw 0.76).

  • PDF