• 여성건강간호학회지
• /
• 제12권4호
• /
• pp.316-325
• /
• 2006

Purpose: The purpose of this study was to develop a Critical Pathway for Uterine Artery Embolization patients. Method: There were 6 steps that were taken. Step 1 was selecting a diagnosis, and Step 2 was organizing a development team consisting of 7 experts. Step 3 analyzed the medical records, and Step 4 drew up a preliminary Critical Pathway. Step 5 tested the clinical validity of the preliminary Critical Pathway, and Step 6 developed the final Critical Pathway. Result: The contents of the medical practices observed in the medical records were investigated in seven areas: monitoring/assessment, treatment, medication, diet, activity, consults, and education/discharge plan; and a total of 73 items was identified. The validity of the 73 items was examined by a group of specialists. 68 items were adopted, 4 items revised, 1 item removed, and 1 item was added. Using the results, a preliminary Critical Pathway was drawn up. According to the results from examining the clinical validity of the preliminary Critical Pathway with five patients for five weeks, 3 items which showed discrepancy were revised and another 3 items were added. Then, the final Critical Pathway was completed. Conclusion: This Critical Pathway needs to be clinically applied and continuously to measure its effects in terms of the length of stay, cost.effectiveness, and the patients' and staffs' satisfaction.

• 한국작물학회지
• /
• 제64권4호
• /
• pp.323-335
• /
• 2019

벼 주요재배 품종의 온도 및 일장에 따른 출수반응을 구명한 내용은 다음과 같다. 1. 온도에 따른 출수반응은 일장 12:00, 평균기온 22℃에서 28℃까지의 범위에서 1℃ 상승에 따라 평균 약 3.5일 정도 단축 되는 것을 확인하였으며, 온도가 상승 할수록 그 차이는 감소하는 경향을 보였다. 또한 온도에 따른 출수까지의 소요일수는 생태형별로 뚜렷한 차이를 보이지 못하였다. 2. 14:30과 12:00의 일장조건에 따른 출수까지의 소요일수 차이는 조생종 9.5일, 중생종 18.3일, 중만생종 23.5일로 온도반응과 달리 생태형간 뚜렷한 반응 차이를 보였으며, 일장조건이 짧아질수록 모든 생태형에서 일장반응에 따른 차이가 감소하는 것을 확인하였다. 3. 벼 주요 재배 품종의 화아분화 시점은 32일이었으며, 각 품종별 한계일장은 조생종인 운광, 오대, 고시히카리, 조평은 각각 19:20, 18:14, 18:58, 17:30이었다. 중생종인 대보, 하이아미, 삼덕은 각각 16:08, 16:15 및 16:55이었고, 중만생종인 새누리, 신동진, 추청, 삼광, 일품, 새일미, 황금누리, 동진찰, 일미, 호품, 영호진미는 각각 15:58, 15:56, 16:36, 16:44, 15:35, 16:26, 15:33, 16:20, 16:29, 16:13, 15:41이었다.

• 한국지반공학회논문집
• /
• 제31권9호
• /
• pp.39-51
• /
• 2015

근래 구조물 기초보강을 위한 마이크로파일공법의 적용사례가 점차 증가하고 있으며, 이에 따른 관련 연구가 다수 수행되고 있다. 그러나 국내 연구는 대부분 Case. I, II-Type의 지지거동에 국한되어 마이크로파일 자체의 구조적 검토에 대한 연구는 미미한 실정이다. 따라서 본 논문에서는 국내에서 주로 사용되는 마이크로 파일에 대한 각각의 강봉 및 그라우트조건에 따른 좌굴특성을 검토하였다. 검토결과 마이크로파일 직경이 작을수록 지반의 임계좌굴점착력($C_{ucr}$)는 증가하게 되며, 특히 임계좌굴길이($L_{cr}$) 이하에서는 마이크로파일 길이가 길수록 임계좌굴하중($P_{cr}$)이 감소함을 알 수 있었다. 또한 축하중을 받는 마이크로파일의 좌굴파괴와 압축파괴 가능성을 구분, 평가할 수 있는 방법을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.755-763
• /
• 2020

The critical flow phenomenon has been studied because of its significant effect for design basis accidents in nuclear power plants. Transition points from thermal non-equilibrium to equilibrium are different according to the geometric effect on the critical flow. This study evaluates the uncertainty parameters of the critical flow model for analysis of DBA (Design Basis Accident) with the MARS-KS (Multi-dimensional Analysis for Reactor Safety-KINS Standard) code used as an independent regulatory assessment. The uncertainty of the critical flow model is represented by three parameters including the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio, and their ranges are determined using large-scale Marviken test data. The uncertainty range of the thermal non-equilibrium factor is updated by the MCDA (Model Calibration through Data Assimilation) method. The updated uncertainty range is confirmed using an LBLOCA (Large Break Loss of Coolant Accident) experiment in the LOFT (Loss of Fluid Test) facility. The uncertainty ranges are also used to calculate an LBLOCA of the APR (Advanced Power Reactor) 1400 NPP (Nuclear Power Plants), focusing on the effect of the PCT (Peak Cladding Temperature). The results reveal that break flow is strongly dependent on the degree of the thermal non-equilibrium state in a ruptured pipe with a small L/D ratio. Moreover, this study provides the method to handle the thermal non-equilibrium factor, discharge coefficient, and length to diameter (L/D) ratio in the system code.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.149-149
• /
• 2018

Prediction on initial motion of sediment is crucial to evaluate sediment transport and channel stability. The condition of incipient movement of sediment is characterized by bed shear stress, which is generated from force of moving water against the bed of the channel, and by critical shear stress, which depends on force resisting motion of sediment due to the submerged weight of the grains. When the bed shear stress exceeds the critical shear stress, sediment particles begin rolling and sliding at isolated and random locations. In Mountain River, debris flow frequently occurs due to heavy rainfall and can lead some natural stones from mountain slope into the bed river. This phenomenon could add additional forces to sediment transport system in the bed of river and also affect or change direction and magnitude of sediment movement. In this paper, evaluations on incipient motion of uniform coarse gravel under falling spheres impacts using small scale flume channel were conducted. The drag force of falling spheres due to water flow and length movement of falling spheres were investigated. The experiments were carried out in flume channel made by glass wall and steel floor with 12 m long, 0.6 m wide, and 0.6 m deep. The bed slopes were selected with the range from 0.7% to 1.5%. The thickness of granular layer was at least 3 times of diameter of granular particle to meet grain placement condition. The sphere diameters were chosen to be 4cm, 6 cm, 8 cm, 10 cm. The spheres were fallen in to the bed channel for critical condition and under critical condition of motion particle. Based on the experimental results, the Shields curve of particles Reynold number and dimensionless critical shear stress were plotted. The relationship between with drag force and the length movement of spheres were plotted. The pathways of the bed material Under the impact of spheres falling were analyzed.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.57-63
• /
• 2003

An eigenvalue design sensitivity formulation of a general nonsymmetric-matrix rotor-bearing system is devised. using the DDM (direct differential method). Then, investigations on the design sensitivities of critical speeds are carried out for an APU turbogenerator with a spline shaft connection. Results show that the dependence of the rate of change of the critical speed on the stiffness changes of bearing models of spline shaft connection points is negligible, and thereby their modeling uncertainty does not present any problem. And the passing critical speeds up to the 4th critical speed are not sensitive to the design stiffness coefficients of four main bearings. Further, the dependence of the rate of change of the critical speed on the shaft-element length changes shows quantitatively that the spline shaft has some limited influence on the 4th critical speed but no influence on the 1st to 3rd critical speeds. With no adverse effect from the spline shaft, the APU system achieves a critical speed separation margin of more than 40% at a rated speed of 60,000 rpm.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.755-762
• /
• 2004

Dynamic analysis of the KTX can predict the dynamic motions in test drive. In this study an analytical model of the KTX is developed to find the critical speed. The numerical analysis for the nonlinear equation motions of 17 degrees of freedom shows the running stability and the critical speed due to the hunting motion of the KTX. Also, the vibration modes of the KTX are calculated using the ADAM/RAIL software, which show that the critical speed occurs for the yawing modes of the car body and the bogie. Finally, this paper shows that the critical speed of the KTX could be changed with the modifications of the design parameters of wheel conicity or wheel contact length.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.3-5
• /
• 2000

Among the various processing techniques used in HTS wire fabrication, the PIP(Powder In Tube) method is currently one of the most promising for applications on an industrial scale. In this study, we have fabricated Bi-2223/Ag superconducting tapes using the modified PIT process, where several process factors were changed and improved, ie., powder packing, drawing, rolling and heat treatment. We obtained Bi-2223 tape that have high critical current, 46 a at 77.3 K, have high critical current, 46A at 77.3 K, self field although the tape was not pressed but only rolled. The critical current of 100m class long length tape was measured 21.6A at the same criterion. Besides, the critical current of Bi-2223/Ag tape was measured applying magnetic fields with different directions at various temperatures.

• Wind and Structures
• /
• 제30권2호
• /
• pp.133-140
• /
• 2020

In this paper, critical fluid velocity and frequency of laminated pipe conveying fluid are presented. Each layer of the pipe is reinforced by functionally graded carbon nanotubes (FG-CNTs). The internal fluid is assumed turbulent and the induced forces are calculated by momentum equations. The pipe is resting on viscoelastic foundation with spring, shear and damping constants. The motion equations are derived based on classical shell theory and energy method. Differential quadrature method (DQM) is used for solution and obtaining the critical fluid velocity. The effects of volume percent and distribution of CNT, boundary condition, lamina layer number, length to radius ration of pipe, viscoelastic medium and fluid velocity are shown on the critical fluid velocity. Results show that with increasing the lamina layer number, the critical fluid velocity increases.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.260-263
• /
• 1997

In this paper, we describe the mechanical strain effects on the critical current density of HTS (BSCCO) pancake-type-magnet. Firstly the strain of pancake coil is calculated in terms of coil length, which is also a function of angle, and then the critical current density degradation due to strain is calculated along the coil. We assumed that the critical current density degradation pattern is same with that of $Nb_{3}Sn$. We also modelled the effects of magnetic field on the critical curent degradation, and the results are compared with those with null magnetic field.