• 한국초전도ㆍ저온공학회논문지
• /
• 제19권3호
• /
• pp.8-12
• /
• 2017

If the part of the HTS magnet is exposed to the outside of the cryogenic coolant due to the fluctuation of the height of the cooling liquid or the vapor generation, the uncooled part becomes very unstable. In this paper, the unstable equilibrium temperature distribution of the uncooled part of a superconductor is obtained, and the maximum temperature and energy are calculated as a function of the uncooled length. Similar to the superconductor stability problem, the current sharing model was applied to derive the theoretical formula and calculated by numerical integration. We also applied a jump model, which assumes that joule heat is generated in all of the uncooled segment, and compares it with the current sharing model results. As a result of the analysis, the stable equilibrium state and the critical uncooled length in the jump model are not shown in the current sharing model. The stability of the conductors to external disturbances was discussed based on the obtained temperature distribution, maximum temperature, and energy.

• 산업공학
• /
• 제21권1호
• /
• pp.43-50
• /
• 2008

Understanding consumers' latent desires for product form has now become a critical issue in product design. Accordingly, product development processes is rapidly changing from product-oriented development to user-centered development. Driver visibility is considered as an important element of driving posture packaging in automobile interior design. This study presents a systematic process for driver visibility analysis approached from affective engineering method that provides design variable selection and screening with respect to the image/impression element of the human visibility. Also, the analysis of front visibility, often called the feeling of "openness", in motor vehicle interior design, is selected and practiced a case study using the systematic process proposed in this study. Twenty six participants evaluated the feeling of openness for thirty motor vehicles following the perceived scale of affective design factors. The results showed that variables such as the height of head lining, the height of cluster housing, the gradient of windshield and the volume of A-pillar were the critical design variables which affect the feeling of openness in a motor vehicle.

• 산업기술연구
• /
• 제19권
• /
• pp.67-74
• /
• 1999

The mechanical properties including forming limit and deep-drawability of commercially-used sheet metals were experimentally estimated in this study. Uniaxial tensile test to obtain basic mechanical properties was carried out, followed by limiting dome height (LDH) test and forming limit diagram (FLD) test to quantitatively evaluate the sheet-formability. Deep drawing and reverse drawing tests were also performed to find out the critical values of the blank holding force and the gap between the die and the blank holder which enabled the deep drawing and reverse drawing of a successful cop without any wrinkle or fracture. The thickness of the cup wall along the rolling-, transeverse- and $45^{\circ}$-directions was measured and compared with one another. And the punch force-stroke curve and the critical punch force expected from the theory coincided with the experimental result very well for mild steel while not for aluminium alloy.

• Steel and Composite Structures
• /
• 제35권3호
• /
• pp.385-404
• /
• 2020

Since the scaffold is composed of modular members, the total height of multi-story scaffolds does not often meet with the headroom of construction buildings. At this time, other supporting members need to be set up on the top of scaffolds. However, the mechanical behaviors of the combined system of scaffolds and other supporting members have seldom been discussed. This study explores the stability of the combined system of scaffolds and shores. The loading tests conducted in the laboratory show that the critical load of the combined system of two-story scaffolds and wooden shores is about half that of the three-story scaffold system with the same height. In the failure of both the "scaffold system" and the "combined system of scaffolds and shores' after loading, the deformation mainly occurs in the in-plane direction of the scaffold. The outdoor loading test shows that no failure occurs on any members when the combined system fails. Instead, the whole system buckles and then collapses. In addition, the top formwork of the combined system can achieve the effect of lateral support reinforcement with small lateral support forces in the outdoor loading test. This study proposes the preliminary design guidelines for the scaffolding structural design.

• Wind and Structures
• /
• 제31권3호
• /
• pp.255-267
• /
• 2020

A systematic set of low-speed wind tunnel experiments was performed at Re = 6.5×10⁴ and 1.1×10⁵ to study the mean wind loading experienced by surface-mounted finite-height square prisms for different aspect ratios, incidence angles, and boundary layer thicknesses. The aspect ratio of the prism was varied from AR = 1 to 11 in small increments and the incidence angle was changed from α = 0° to 45° in increments of 1°. Two different boundary layer thicknesses were used: a thin boundary layer with δ/D = 0.8 and a thick boundary layer with δ/D = 2.0-2.2. The mean drag and lift coefficients were strong functions of AR, α, and δ/D, while the Strouhal number was mostly influenced by α. The critical incidence angle, at which the prism experiences minimum drag, maximum lift, and highest vortex shedding frequency, increased with AR, converged to a value of α_c = 18° ± 2° once AR was sufficiently high, and was relatively insensitive to changes in δ/D. A local maximum value of mean drag coefficient was identified for higher-AR prisms at low α. The overall behaviour of the force coefficients and Strouhal number with AR suggests the possibility of three flow regimes.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.79-82
• /
• 2008

모멘트 하중을 받는 I형 보의 탄성좌굴강도는 하중의 종류, 하중의 단면 내 작용위치, 그리고 구속조건 등과 같은 인자들에 의해 영향을 받는다. 대부분의 시방기준에서는 균일한 모멘트 조건에 대한 좌굴강도를 사용하고 있으며 비균일한 모멘트 효과를 고려하기 위하여 모멘트 구배 수정계수를 적용하고 있다. 본 논문에서는 SSRC 지침서의 방법을 일축대칭 I형 보에 적용할 수 있도록 개선된 모멘트 구배 수정계수를 제안하였다. 단면 내 임의의 높이에 작용하는 연직방향 하중에 대한 일축대칭 I형 보의 유한요소 좌굴해석을 실시하였으며 연직방향 하중은 지간 중앙에 작용하는 집중하중과 등분포 하중을 고려하였다.

• 생물환경조절학회지
• /
• 제17권3호
• /
• pp.197-203
• /
• 2008

본 연구는 1-2W형 온실의 구조를 개조하여 착색단 고추 재배온실로 이용하고 있는 온실의 구조의 안정성을 검토하였다. SAP-2000에 의한 구조해석 결과 1-2W기본형 온실의 기둥을 1.2m높였을 경우, 구조물이 견딜 수 있는 한계적설심은 변화는 거의 없으나 한계풍속은 약 $26.0\sim41.0m/s$정도로서 기본형에 비하여 약 $3\sim18%$ 정도 감소하는 것으로 나타났다. 풍하중 작용시 변형도를 비롯하여 축방향력, 전단력, 휨모멘트 등의 최대단면력은 기본형이나 개조형에 관계없이 거의 유사한 경향으로 나타났으며, 최대단면력은 풍상측의 처마높이 부위에서 발생하는 것으로 나타났다. 설하중 작용시 변형도를 비롯하여 축방향력, 전단력, 휨모멘트 등의 최대단면력은 기본형이나 개조형에 관계없이 거의 유사한 경향으로 나타났으며, 축방향력을 제외한 최대단면력은 처마높이 부위에서 발생하였으며, 최대축방향력은 내측기둥에서 발생하였다. 한계적설심에 대한 내측기둥의 좌굴은 모두 안전한 것으로 나타났으며 세장비 또한 제한값 범위내에 들어 기본형 및 개조형 모두 만족하였다. 기초의 인발저항력과 지내력은 기본형과 개조형에 관계없이 모두 안전한 것으로 나타났다.

• 대한조선학회논문집
• /
• 제47권1호
• /
• pp.38-46
• /
• 2010

This study aims at investigating the effect of the baffle height on the liquid sloshing in the three-dimensional (3D) rectangular tank. In order to simulate the 3D incompressible viscous two-phase flow in the 3D tank with partially filled liquid, the present study has adopted the volume of fluid (VOF) method based on the finite-volume method which has been well verified by comparing with the results of the relevant previous researches. The ratio of the baffle height ($h_B$) to filling level (h) has been changed in the range of $0{\leq}h_B/h{\leq}1.2$ to observe the effect on the impact loads on the side wall and free surface behavior. Generally, as baffle height increases, the impact pressure on the wall decreases and the deformation of free surface becomes weaker. However it seemed that a critical ratio of the baffle height existed to reveal the lowest impact pressure on the wall. Consequently, $h_B/h=0.8$ among $h_B/hs$ considered in the study showed the lowest impact pressure.

• 한국농공학회지
• /
• 제31권1호
• /
• pp.58-70
• /
• 1989

The paper compared the Bishop methed to the Fellenius method in the analysis of slope stability. Laboratory model test was carried out in the case of seepage flow considered. The results obtained from this study were summarized as follows; 1. The slice pieces of 10 were enough to analysis the slope stability. 2. The safety factor. by the Fellenius method was lower than the Bishop method by the 96 to 97% in the case of no seepage flow and by the 95 to 96% in the case of seepage flow considered. 3. Besides the parameter of soil and slope, the safety factor of slope was influenced by the height of slope. This phenomena was distinct in the height of height less than 10 meters. 4. In the case of clay, there was no difference in the safety factor of slope between Fellenius and Bishop rnethod. The safety factors of slope with the seepage flow considered were lower than those with no see-page flow. 5. The influence of cohesion on the safety factor was more significant in the Bishop method than in the Fellenius method. 6. The slope failure of model test of A and B soil samples with high permeability coefficient was taken place slightly in vicinity of toe by the concentration of stress and gradually increased 7. Under condition of same slope height, the shapper the slope, the shorter the radius and the center of critical circle appered downward and finally failure of slope occured inside the slope.

• 한국조경학회지
• /
• 제24권2호
• /
• pp.1-12
• /
• 1996

In order to develope a road landscape that is in harmony with landscaping purpose, degree of sight occupation by slopes at road sides was measured and physical elements composing the slope scenery were visually evaluated and the results are as follows : In analysis of sight occupation ratio by perspective method, gradient of the slopes influenced more on the sight occupation than height did and the driving lane occupied 2 to 3% more proportion of sight than the passing lane. When there is slope at one side of the road, difference in sight occupation between the lanes was increasing with deceased height and with increased gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. In visual analysis of the slope scenery, negative image was increasing with narrow road, increased height and gradient of the slopes. Particularly, the effect of gradient was critical on scenery. The effect of the slopes was negative at 60$^{\circ}$ or more but positive at 45$^{\circ}$or less gradient. This phenomenon was more conspicuous with wide 4 lane roads than wide 2 lane roads. Although direct comparison is difficult due to a great difference between Korea and U.S.A. in climate, land condition, road dimension, and public process of purchasing land, etc, it is desirable to treat road sides so that the scenery is in harmony with landscape around as well as emphasizing the regional characteristics, also giving friendly and comfortable image to drivers and nearby residents in addition to safety as can be seen in U.S.A.