• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.49-51
• /
• 2002

In this thesis, Josephson junction using high-Tc superconducting multi-layer thin film has been fabricated by on-axis RF magnetron sputtering method. And, the characterizations were performed by X-ray diffraction, SEM and the measuring system of critical current density. The physical properties of multi-layer superconducting thin films were also analyzed with the measured results. To fabricate the multi-layer superconducting thin films, the optimum partial pressure of Argon and Oxgen and the temperature of substrate were measured. Also, YBaCuO thin film was grown on MgO and $SrTiO_3$ substrates by rf-sputtering and LGO thin film of 30 A was epitaxially grown on the YBaCuO thin film as a josephson junction with the same condition. The schottky barrier at the contact surface between YBaCuO/LGO and YBaCuO/Au and the energy gap of 0.5 ${\sim}$ 0.6 mV in Nb were observed from the dI/dV-V of YBaCuO/LGO/Au/Nb and YBaCuO/Au/Nb.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.84-92
• /
• 2016

Compared with Si MOSFETs, the GaN FET has many advantages in a wide band gap, high saturation drift velocity, high critical breakdown field, etc. This paper compares the electrical properties of GaN FETs and Si MOSFETs. The soft-switching condition and power loss analysis in a flyback-forward high gain DC/DC converter with a GaN FET is presented in detail. In addition, a comparison between GaN diodes and Si diodes is made. Finally, a 200W GaN FET based flyback-forward high gain DC/DC converter is established, and experimental results verify that the GaN FET is superior to the Si MOSFET in terms of switching characteristics and efficiency. They also show that the GaN diode is better than the Si diode when it comes to reverse recovery characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.300-303
• /
• 2004

To fill the gap of films for metal-to-metal space High density plasma fluorinated silicate glass (HDP FSG) is used due to various advantages. However, FSG films can have critical drawbacks such as bonding issue of top metal at package, metal contamination, metal peel-off, and so on. These problems are generally caused by fluorine penetration out of FSG film. Hence, FSG capping layers such like SRO(Silicon Rich Oxide) are required to prevent flourine penetration. In this study, their characteristics and a capability to block fluorine penetration for various FSG capping layers are investigated through FTIR analysis. FTIR graphs of both SRO using ARC chamber and SiN show that clear Si-H bonds at $2175{\sim}2300cm^{-1}$. Thus, Si-H bond at $2175{\sim}2300cm^{-1}$ of FSG capping layers lays a key role to block fluorine penetration as well as dangling bond.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.587-590
• /
• 2003

The first attention in designing a transformer for low temperature rise should be to reduce losses. Leakage inductance and temperature rise are two of the more impotent problems facing the magnetic core technology of today's high frequency transformers. Excessive leakage inductance increases the stress on the switching transistors and limits the duty-cycle, and excessive temperature rise can lead the design limitation of high frequency transformer with high current. The flat transformer technology provides a very good solution to the problems of leakage inductance and thermal management for high frequency power. The critical magnetic components and windings are optimized and packaged within a completely assembled module. The turns ratio in a flat transformer is determined as the product of the number of elements or modules times the number of primary turns. The leakage inductance increase proportionately to the number of elements, but since it is reduced as the square of the turns, the net reduction can be very significant. The flat transformer modules use cores which have no gap. This eliminates fringing fluxes and stray flux outside of the core. The secondary windings are formed of flat metal and are bonded to the inside surface of the core. The secondary winding thus surrounds the primary winding, so nearly all of the flux is captured.

• Journal of Information Technology Services
• /
• v.18 no.3
• /
• pp.143-154
• /
• 2019

The purpose of this study is to explore innovative adaptation of IT systems worldwide to support process-focus assessment. To this end, the study presents four cases from Australia, Singapore, the U.S.A., and Korea to inform educational policy and technology researchers and practitioners. Based on comparing the four chosen cases as benchmarks, the study concluded that IT systems and technologies can expedite and improve school interventions to enhance student learning in terms of time and quality. Also, educational big data and learning analytics can be used to systematically monitor and communicate individual student's progress among school stakeholders (i.e., teachers, students, parents, and administrators). Lastly, the study made some suggestions to support process-focused assessment in schools as following : 1) A more evidence-based, systems approach is needed to integrate the curriculum, instruction, and assessment to bridge the gap between educational policy and school practice; 2) It is critical to create ICT-friendly school environments so that meaningful data could be collected, analyzed, and stored from individual students and school units; 3) Teacher professional development is another area that needs special considerations and support to successfully implement process-focused assessment in schools.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.477-488
• /
• 2013

The PLC (Programmable Logic Controller) has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems). Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array). Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.524-537
• /
• 2021

High-performance Linpack (HPL) is among the most popular benchmarks for evaluating the capabilities of computing systems and has been used as a standard to compare the performance of computing systems since the early 1980s. In the initial system-design stage, it is critical to estimate the capabilities of a system quickly and accurately. However, the original HPL mathematical model based on a single core and single communication layer yields varying accuracy for modern processors and accelerators comprising large numbers of cores. To reduce the performance-estimation gap between the HPL model and an actual system, we propose a mathematical model for multi-communication layered HPL. The effectiveness of the proposed model is evaluated by applying it to a GPU cluster and well-known systems. The results reveal performance differences of 1.1% on a single GPU. The GPU cluster and well-known large system show 5.5% and 4.1% differences on average, respectively. Compared to the original HPL model, the proposed multi-communication layered HPL model provides performance estimates within a few seconds and a smaller error range from the processor/accelerator level to the large system level.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.9
• /
• pp.341-349
• /
• 2021

This study is conducted to fill the research gap in proposing and testing the relationship between "Attitudes about the overall image of the destination", "Subjective norms" and "Perceived behavioral control". Simultaneously, we examine the relationship between these variables and tourists' "intent to choose a destination.". While most previous studies only deal with the relationship between destination image and intended behavior of tourists, this study uses the theory of planned behavior (Ajzen, 1991) to explain the intended behavior of tourists. In addition, the Theory of Destination Image (Echtner & Ritchie, 1991) is used to explain the factor "attitudes about the overall image of the destination", contribute to supplementing and perfecting the Theory of Planned Behavior. This study uses a Structural Equation Modeling (SEM) to analyze a sample of 993 observations, the subjects of which are international tourists to Vietnam, to test the relationship between second-order constructs. The test results show that "Subjective norms" and "Perceived behavioral control" have an impact on "Attitudes about the overall image of the destination". Moreover, all these three factors have an impact on "Intent to choose destination", in which the factor "Perceived behavioral control" has the greatest impact on "intention to choose destination".

• Journal of Digital Convergence
• /
• v.17 no.4
• /
• pp.29-39
• /
• 2019

This paper understands small and medium-sized enterprises(SMEs) with the lenses of 'labors' and 'technology' and analyzes possible alternatives for creating jobs in Korea. Interviews with eighty CEOs, directors, managers are conducted during the summer in 2017. In terms of 'labors,' critical issues were 'low income' and 'income gap from conglomerates.' When it comes to 'technology,' support for R&D was critically presented. This study proposes three policies for creating jobs: 1) National Management for Good Technicians, 2) Technical Bidding System, and 3) Mutual benefit disclosure System. Implications for the employment policy are followed.

• East Asian Economic Review
• /
• v.23 no.1
• /
• pp.27-53
• /
• 2019

I employ search-and-matching to a multi-country and multi-sector Ricardian model with input-output linkages, trade in intermediate goods, and sectoral heterogeneity, in order to quantify the welfare effects from tariff changes. The paper shows that labor market frictions can be a source of comparative advantage in the sense that better labor market conditions contribute to lower cost in production. Labor market frictions play a critical role in determining the probability of exporting goods to trading partners, and interact with bilateral trade share, price, expenditures, etc. Unemployment and changes in unemployment rates due to tariff reductions contribute welfare changes across countries, implying that welfare effects based on quantitative trade models with full-employment are likely to be biased. I confirm the biased welfare effects by revisiting Caliendo and Parro (2015), who conduct an analysis of the welfare effects from the NAFTA from 1993 to 2005. I show that the welfare gap between theirs and mine has a positive correlation with changes in observed unemployment rates across countries. With the constructed model, I further conduct counterfactual exercises by asking what would happen if China's tariffs remain unchanged from 2006 to 2015. It turns out that there are mild welfare effects to trading partners in the world trading system.