• 한국잠사곤충학회지
• /
• 제3권
• /
• pp.1-11
• /
• 1963

본 실험은 견직물 Lousiness의 가시조건을 세우고 잠견 Lousiness 검사를 초제련에 의하여 새로운 검사기준을 규정하는 동시에 견사선해부관찰로서 Lousiness 근절가능성과 잠견 Lousiness의 개선여부를 검사하는 데 목적이 있으며 다음과 같은 결과를 얻었다. 1. 직물섬유방향이 광선방향과 평면도입장에서 일치할 때 가장 잘 보인다. 그러나 광선방향과 섬유방향의 평면 각도가 커질수록 Lousiness 출현이 감소하고 어느 한계각(30도)을 초과하면 Lousiness가 보이지 않는다. 이 각도를 Lousiness 수평임계각(Lousiness Horizontal Critical Angle)이라고 명명하였다. 2. 광선의 대직물입사각도가 6도일 때 가장 잘 보이고 입사각도가 커짐에 따라 Lousiness 출현정도가 감소하고 역시 어느 한계각도(45도)를 초과하면 Lousiness가 보이지 않는다. 이 때의 한계각도를 Lousiness 수직임계각(Lousiness Vertical Critical Angle)이라고 명명하였다. 3. 직물조직으로서는 평직이 Lousiness 출현도가 가장 적고, 능직, 및 교직은그의 출현도가 크다. 4. Lousiness를 3가지로 대별하고 일반세섬유형을 Lousiness A, 집단형을 Lousiness B, glucose 형을 Lousiness C로 명명하였으며, 평점에 필요한 표준사진을 작성하였다. 5. 초정련방법으로서 8시간이 적당하였다. 6. 주섬유와 세섬유의 직경차가 클수록 Lousiness 발생이 심하며 일반 Lousiness는 주견단계의 1/4∼1/5의 직경이었다. 7. 견부위별로는 견양단부견층부위별로는 중층에 Lousiness가 많았는데 이것은 토계영견중의 견사긴완차에 기인한다. 8. 자웅간에는 자견이 웅견보다 Lousiness가 많았다. 9. 견사선해부로서 정상견사선에도 세섬유화할 가능성이 있음을 구명하였고, 여러 가지 이상견사선으로 Lousiness가 발생하게 되는 소인이 있음을 알았다. 또 Lousiness의 품종도태로 인한 개선은 이상견사선제거로 어느 정도 가능할 뿐이다. 10. 도태후 차대견계는 초정련법으로 도태한 바 많은 효과를 얻었다.

• 한국항해항만학회지
• /
• 제31권3호
• /
• pp.223-228
• /
• 2007

최근 선박의 대형화와 전용화가 현저하게 진행됨에 따라 갑판 상부의 구조물이 비교적 큰 컨테이너선, LNG 운반선, 자동차운반선, 여객선 등이 출현하여 운항되고 있다. 이러한 선박들이 부두에서 접 이안 또는 항내에서 저속으로 운항할 경우 바람, 조류 등과 같은 외력의 영향을 받기 쉬우며, 외력이 과도할 경우에는 압류나 회두 현상으로 인해 선박 운항에 지장을 초래할 수 있으므로 특정 외력 하에서의 선체 거동에 대한 분석은 선박의 안전운항에 있어서 매우 중요한 자료라 할 수 있다. 본 연구는 수면 상부의 구조물이 상대적으로 큰 실습선 한나라호를 대상으로 정상풍 하에서의 선체에 작용하는 풍압력 및 풍압모우멘트 영향을 분석하였다. 또한 정상풍 하의 선박 운항에 있어 주요한 정보인 표류각과 대응 타각을 상대 풍향과 풍속을 기초로 산출하였고, 풍속 선속비에 따른 조종 한계 풍속, 선속별 풍향에 따른 조종 한계 풍속, 최대 풍압력에 의한 횡경사각 등을 정량적으로 산출하여 제시하였다. 이러한 자료는 한나라호의 입출항 조종 및 태풍 피항을 위한 운항 현장에서 직접 활용될 수 있고, 실선에서 해당 결과를 비교 평가할 수 있으므로 향후 이론식에 대한 수정 및 보완과 함께 교육 자료로 이용될 수 있을 것으로 판단된다.

• 기본간호학회지
• /
• 제7권2호
• /
• pp.256-270
• /
• 2000

Invasive hemodynamic monitoring has become a valuable assessment parameters in critical care nursing in patients undergoing open heart surgery patients. During cardiac surgery, the Swan Ganz catheter is placed in the pulmonary artery. Critical care nurses routinely obtain cardiac output, cardiac index, and pulmonary arterial pressure in these patients. Traditionally, patients are positioned flat and supine for cardiac output measurement. Numerous studies have dealt with the effects of changing position on the hemodynamic variables. However, there are a few studies dealing with patients who undergo cardiac surgery in Korea. Thus, the purpose of this study was to determine the effects of changing position on cardiac output, PAP, CVP, BP, HR and discomfort in patients after cardiac surgery. A sample of 21 adults who had CABG and/or valve replacement with Swan Ganz catheters in place was studied. The data were collected in the cardiac ICU of a university hospital in Seoul during the period from July 28, 1999 to August 30. 1999. In this study, the independent variable is patient position in the supine, 30 degree, and 45 degree angles. Dependent variables are C.O., C.I., CVP, PAP, MAP, HR and patients' perceived discomforts. Subject discomfort was measured subjectively by visual analogue scale. Other hemodynamic data where collected by the thermodilution method and by direct measurement. The data were analyzed by percentile, t-test, ANOVA, Linear regression analysis using SPSS-/WIN program. The results are as follows : 1) Changes in cardiac output were absent in different angle positions, 0, 30. 45 degrees(F=.070, P=.932). Changes in cardiac index were absent in different angle positions, 0. 30, 45 degrees(P>.05). 2) Changes in central venous pressure were absent in different angle positions, 0, 30, 45 degree(P>.05). 3) PAP had no change in different angle 0, 30, 45 degree positions; systolic PAP(P>.05), diastolic PAP(P>.05). 4) Changes in systolic blood pressure were absent in different angle positions, 0, 30, 45 degree(P>.05). 5) Changes in heart rates were absent in different angle positions, 0, 30, 45 degree(P>.05). 6) Patients' perceived discomfort was absent in different angle positions, 0, 30, 45 degree(p<.05). In conclusion, critical care nurses can measure C.O., C.I., PAP, BP, & CVP in cardiac surgery patients at 30 degree or 45 degree positions. This can improve the patients' comfort.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.1-19
• /
• 1978

Power tiller is a major unit of agricultural machinery being used on farms in Korea. About 180.000 units are introduced by 1977 and the demand for power tiller is continuously increasing as the farm mechanization progress. Major farming operations done by power tiller are the tillage, pumping, spraying, threshing, and hauling by exchanging the corresponding implements. In addition to their use on a relatively mild slope ground at present, it is also expected that many of power tillers could be operated on much inclined land to be developed by upland enlargement programmed. Therefore, research should be undertaken to solve many problems related to an effective untilization of power tillers on slope ground. The major objective of this study was to find out the travelling and tractive characteristics of power tillers being operated on general slope ground.In order to find out the critical travelling velocity and stability limit of slope ground for the side sliding and the dynamic side overturn of the tiller and tiller-trailer system, the mathematical model was developed based on a simplified physical model. The results analyzed through the model may be summarized as follows; (1) In case of no collision with an obstacle on ground, the equation of the dynamic side overturn developed was: $$\sum_n^{i=1}W_ia_s(cos\alpha cos\phi-{\frac {C_1V^2sin\phi}{gRcos\beta})-I_{AB}\frac {v^2}{Rr}}=0$$ In case of collision with an obstacle on ground, the equation was: $$\sum_n^{i=1}W_ia_s\{cos\alpha(1-sin\phi_1)-{\frac {C_1V^2sin\phi}{gRcos\beta}\}-\frac {1}{2}I_{TP} \( {\frac {2kV_2} {d_1+d_2}\)-I_{AB}{\frac{V^2}{Rr}} \( \frac {\pi}{2}-\frac {\pi}{180}\phi_2 \} = 0 $$ (2) As the angle of steering direction was increased, the critical travelling veloc\ulcornerities of side sliding and dynamic side overturn were decreased. (3) The critical travelling velocity was influenced by both the side slope angle .and the direct angle. In case of no collision with an obstacle, the critical velocity $V_c$ was 2.76-4.83m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ ; and in case of collision with an obstacle, the critical velocity $V_{cc}$ was 1.39-1.5m/sec at $\alpha=0^\circ$, $\beta=20^\circ$ (4) In case of no collision with an obstacle, the dynamic side overturn was stimu\ulcornerlated by the carrying load but in case of collision with an obstacle, the danger of the dynamic side overturn was decreased by the carrying load. (5) When the system travels downward with the first set of high speed the limit {)f slope angle of side sliding was $\beta=5^\circ-10^\circ$ and when travels upward with the first set of high speed, the limit of angle of side sliding was $\beta=10^\circ-17.4^\circ$ (6) In case of running downward with the first set of high speed and collision with an obstacle, the limit of slope angle of the dynamic side overturn was = $12^\circ-17^\circ$ and in case of running upward with the first set of high speed and collision <>f upper wheels with an obstacle, the limit of slope angle of dynamic side overturn collision of upper wheels against an obstacle was $\beta=22^\circ-33^\circ$ at $\alpha=0^\circ -17.4^\circ$, respectively. (7) In case of running up and downward with the first set of high speed and no collision with an obstacle, the limit of slope angle of dynamic side overturn was $\beta=30^\circ-35^\circ$ (8) When the power tiller without implement attached travels up and down on the general slope ground with first set of high speed, the limit of slope angle of dynamic side overturn was $\beta=32^\circ-39^\circ$ in case of no collision with an obstacle, and $\beta=11^\circ-22^\circ$ in case of collision with an obstacle, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.986-992
• /
• 2014

This research investigates experimentally and numerically the tilting angle, eccentricity ratio, flying height of axial direction, friction torque, and critical mass of the HDD disk-spindle system due to HDD positioning angle. The tilting angle and the eccentricity ratio are the maximum when the HDD positioning angle is $90^{\circ}$ respect to horizontal position because the external force in radial direction and the torque applied to the rotating part are the maximum when the HDD positioning angle is $90^{\circ}$. The flying height increases with the increase of the HDD positioning angle because the direction of gravity applied to the rotating part changes. The friction torque increases with the increase of the HDD positioning angle until it becomes $60^{\circ}$, and decreases with the increase of the HDD positioning angle after it becomes $60^{\circ}$. The stability is the maximum when the HDD positioning angle is $90^{\circ}$.

• 한국전산유체공학회지
• /
• 제13권2호
• /
• pp.8-13
• /
• 2008

A supersonic viscous flow over a five-degree half-angle cone is studied computationally with three-dimensional Navier-Stokes equations. Steady asymmetric solutions show that the asymmetric flow separation is caused by convective instability. The effects of angle of attacks, Reynolds numbers, and Mach numbers have been investigated and it is found that those factors affect the generation of the side force. The side force has the maximum value at ${\alpha}=22^{\circ}$, while over ${\alpha}=22^{\circ}$, asymmetric vortex becomes transient, which results in the unsteady shedding. At the angle of attack of 22 degrees, the side force increases with Reynolds number and decreases with Mach number. The increase of the side force stops over the critical Reynolds number for the present configuration.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.985-992
• /
• 2005

Vehicle Stability Control (VSC) system prevents vehicle from spinning or drifting out mainly by braking intervention. Although a control threshold of conventional VSC is designed by vehicle characteristics and centered on average drivers, it can be a redundancy to expert drivers in critical driving conditions. In this study, a manual adaptation of VSC is investigated by changing the control threshold. A control threshold can be determined by phase plane analysis of side slip angle and angular velocity which is established with various vehicle speeds and steering angles. Since vehicle side slip angle is impossible to be obtained by commercially available sensors, a side slip angle is designed and evaluated with test results. By using the estimated value, phase plane analysis is applied to determine control threshold. To evaluate an effect of control threshold, we applied a 23-DOF vehicle nonlinear model with a vehicle planar motion model based sliding controller. Controller gains are tuned as the control threshold changed. A VSC with various control thresholds makes VSC more flexible with respect to individual driver characteristics.

• Geomechanics and Engineering
• /
• 제20권2호
• /
• pp.121-129
• /
• 2020

In the design of geotechnical structures, engineers choose either peak or critical state friction angles. Unfortunately, this selection is based on engineer's preference for economy or safety and lacks the assessment of the expected level of deformation. To fill this gap in the design process, this study proposes a strain based empirical method. Proposed method is founded on the experimentally supported assumption that higher dilatancy angles result in more brittle soil response. Using numerous triaxial test data on ten different soils, an empirical design chart is developed that allows the estimation of shear strain at failure based on soil's peak dilatancy angle and mean grain diameter. Developed empirical chart is verified by conducting a small scale retaining wall physical model test. Finally, a design methodology is proposed that makes the selection of design friction angle in structured way possible based on the serviceability limits of the proposed structure.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.298-301
• /
• 2021

A mechanical angle estimator is presented in this study to achieve the sensorless control of permanent magnet synchronous motor (PMSM) used in driving a reciprocating compressor. Braking the PMSM at a specific mechanical angular position is critical for the silent stoppage of the reciprocating compressor. The performance of conventional mechanical angle observers used in reciprocating compressor drives can be seriously affected according to gains of the speed controller because such observers rely on the magnitude of current ripples. A speed ripple-based mechanical angle estimator is proposed to solve this problem. Experimental results showed the effectiveness of the proposed method.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.61-75
• /
• 2003

한계상태 토질역학을 사질토의 전단거동에 대한 적용을 용이하게 하기 위해서, 표준삼축 시험으로부터 사질토에서의 한계상태정수 결정에 관하여 종합적인 고찰을 실시하였다. 첫째로, 문헌에 있는 어휘론적인 차이점들을 명확히 함으로써, 한계상태는 대변형에서의 궁극적인 최종상태를 나타냄을 추론하였다. 둘째로, 한계상태정수의 특성들에 관하여 검토하였고, 초기상태, 구주 하중조건 및 배수조건에 따른 한계상태선의 유일성과 유사한계상태조건의 민감성을 검증하였다. 셋째로, 한계상태정수로부터 액상화후 전단강도 즉 액상화된 흙에서의 신뢰할 수 있는 궁극적인 전단강도를 산정하기 위하여 한계상태 토질역학을 예제로서 적용하였다.