• Steel and Composite Structures
• /
• 제37권4호
• /
• pp.463-479
• /
• 2020

Currently, there are many lateral resisting systems utilized in resisting lateral loads being produced in an earthquake. Such systems can significantly reduce the roof's displacement when placed at an optimum location. Since in the design of tall buildings, the minimum distance between adjacent buildings is important. In this paper, the critical excitation method is used to determine the best location of the belt truss system while calculating the minimum required distance between two adjacent buildings. For this purpose, the belt truss system is placed at a specific story. Then the critical earthquakes are computed so that the considered constraints are satisfied, and the value of roof displacement is maximized. This procedure is repeated for all stories; i.e., for each, a critical acceleration is computed. From this set of computed roof displacement values, the story with the least displacement is selected as the best location for the belt truss system. Numerical studies demonstrate that absolute roof displacements induced through critical accelerations range between 5.36 to 1.95 times of the San Fernando earthquake for the first example and 7.67 to 1.22 times of the San Fernando earthquake for the second example. This method can also be used to determine the minimum required distance between two adjacent buildings to eliminate the pounding effects. For this purpose, this value is computed based on different standard codes and compared with the results of the critical excitation method to show the ability of the proposed method.

• Nuclear Engineering and Technology
• /
• 제5권2호
• /
• pp.115-131
• /
• 1973

L.S. Pontryagin의 Maximum Principle과 수직방향을 고려하지 않은 2군 화산 방정식을 우라늄농축도 범위에 제한없이 원통형원자로의 최소 임계질량문제에 적용하였다. 핵연료 장전방법에 관한한 최적 원자로는 내심부와 외심부가 최소의 농축도를 갖고 중간영역은 최대의 농축도를 갖는 3-영역식 원자로인 것으로 밝혀졌다. 상기 3-영역식 원자로를 모델로 하여 임계조건을 유도하였으며, 또한 고리원자로를 예로하여 농축도를 여러가지로 변환시키면서 임계조건의 해를 구하는 수치해석을 수행하였다. 그 결과 여러가지 임계조건중 최소의 임계질량을 갖는 경우는 중간영역에서의 최대 농축도가 1.2%이고 내심부와 외심부에서의 농축도가 0.65%일때라는 것이 판명되었다.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.130-135
• /
• 2010

In this paper, the shading ratio about to output the minimum critical power of a photovoltaic panel was determined by experiment and simulation. A 2.475[kW] poly-crystalline photovoltaic panel consisting of 11 modules was used in the experiment and its surface was covered with shading curtains, thus the amount of light incident to the modules were controlled. In order to compare with the experimental results, the experimental circuits were modelled with the CASPOC (power electronics electrical drives simulator) and module parameters were applied to it, by which the minimum critical power was calculated. As a result, the photovoltaic panel was about to generate the power when the 5th shading curtains were removed from the module surface, after then the output power linearly increased by removing the shading curtains. In addition, the CASPOC simulation results were similar to the experimental results in the abrupt decreasing pattern of power.

• 한국농공학회지
• /
• 제28권2호
• /
• pp.87-92
• /
• 1986

The differential equation, which can determine the dynamic critical loads for low parabcoic arches, is derived in this study. The dynamic critical loads of the parabolic arches subjected to a concentrated step load are nummerically analyzed for the changes of load positions. In cases of arches with different end conditions (both hinged, fixed hinged, both fixed), the effect of end conditions and that of the rises are investigated in detail. The summary of the results are the following: 1)The snapthrough does not occur when the rise of arch is very low, and the bifurcation appears clearly as the rise of arch increases. 2)The regions in which the dynamic critical loads are not defined for the both ends fixed are broader than that for the both ends hinged. 3)For all case, the load positions of minimum dynamic critical loads exsit at the near position from the end hinged. Thus, the results obtained in present study show that the magnitude of dynamic critical loads, the load positions of minimum dynamic critical loads and the regions in which the dynamic critical loads are not defined depend on end conditions of arches.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.7-8
• /
• 2009

Non-contact critical current measurement apparatus was developed using hall probe which measures the magnetic field distribution across the width of superconducting tape. The hall probe consists of 7 independent hall sensors which lie in a line 600 ${\mu}m$. The difference between maximum and minimum magnetic field in the magnetic filed distribution is a main parameter to determine the critical current. As preliminary research, we calculated the magnetic field intensity at the middle sensor, which is a minimum magnetic field and generated by the circular shielding current modeled by Bean model. We confirmed that there are some parameters that affect on the minimum magnetic field; the distance between superconducting layer and hall sensor, the width of superconducting tape, and the critical current distribution across the width of superconducting tape. Among these parameters, the distance between superconducting layer and hall sensor highly influences on the minimum magnetic field.

• Tribology and Lubricants
• /
• 제38권6호
• /
• pp.281-286
• /
• 2022

In this study, the effects of Elasto-hydrodynamic lubrication pressure on the critical shoulder height of raceway in an angular contact ball bearing were investigated. Both 3D contact analyses using an influence function and the EHL analysis were conducted for the contact geometry between the ball and raceways. The pressure distributions by 3D contact analysis and EHL analysis for an example bearing were compared. The effect of ellipse truncation on the minimum film thickness also investigated from EHL analysis. The critical shoulder height in the dry contact and the EHL state were compared for various applied loads. It is shown that when the ellipse truncation occurs, the pressure spike for the EHL conjunction is higher than that for the dry contact, and its location moves more inward of the contact center. The steep pressure gradients would increase the flow rate, so in order to maintain flow continuity a significant reduction in film thickness and an abrupt rise in pressure occurs in the edge of shoulder. Significant reduction of the minimum film thickness occurs near the edge of shoulder. The critical shoulder heights in the EHL state are calculated as higher values compared with in the dry contact. This results shows that the determination of critical shoulder height by the EHL analysis is more proper.

• 중환자간호학회지
• /
• 제12권1호
• /
• pp.46-56
• /
• 2019

Purpose : The purpose of this study was to identify minimum data sets for oral mucous integrity-related documentation and to analyze nursing records for oral care. Methods: To identify minimum data sets for oral status, the authors reviewed 26 assessment tools and a practical guideline for oral care. The content validity of the minimum data sets was assessed by three nurse specialists. To map the minimum data sets to nursing records, the authors examined 107 nursing records derived from 44 patients who received chemotherapy or hematopoietic stem cell transplantation in one tertiary hospital. Results: The minimum data sets were 10 elements such as location, mucositis grade, pain, hygiene, dysphagia, exudate, inflammation, difficulty speaking, and moisture. Inflammation contained two value sets: type and color. Mucositis grade, pain, dysphagia and inflammation were recorded well, accounting for a complete mapping rate of 100%. Hygiene (100%) was incompletely mapped, and there were no records for exudate (83.2%), difficulty speaking (99.1%), or moisture (88.8%). Conclusion: This study found that nursing records on oral mucous integrity were not sufficient and could be improved by adopting minimum data sets as identified in this study.

• 한국응용과학기술학회지
• /
• 제20권1호
• /
• pp.51-56
• /
• 2003

Garlic extract using super-critical carbon dioxide is influenced by temperature and pressure, and the optimum condition can make under super-critical state. We can know the defects in process of super-critical extration, It can indicate the drop of product rate, energy loss and equipment expense etcs. The minimum inhibition concentration of microbe which garlic extract contains has apperared the concentration more than 800ppm in this experiment. According to the result of this experiment, we can know that the antibiosis effect in the microbe of staphylococcus and fungus has disappeared in the incubation time more than 12 hours.

• 대한화학회지
• /
• 제8권2호
• /
• pp.57-61
• /
• 1964

It was verified at Part Ⅰ of this investigation that there is a minimum wettability between molten iron and graphite, which was preliminarily coated with magnesium, and thus the spheroidization of graphite might have resulted from the lack of wettability between magnesium-adsorbed graphite and iron matrix. Being continued from the last work, the wettability between pure iron and graphite, coated with the various thickness of cerium, are measured at melting point of pure iron in vacuum and 200 mmHg argon gas atmosphere. The result indicates the presence of a minimum wettability at a critical thickness of cerium film as was proved in the case of magnesium. The experimental analysis shows that, the minimum wettability could be attributed entirely to a minimum work of adhesion between liquid iron and graphite at a critical concentration of cerium in the iron-graphite interface.

• Communications for Statistical Applications and Methods
• /
• 제4권1호
• /
• pp.229-241
• /
• 1997

We consider discrimination curve and minimum dwell time for Poisson distribution and Poisson-power function distribution. Let the random variable X has Poisson distribution with mean .lambda.. For the hypothesis testing H$\_$0/:.lambda. = t vs. H$\_$1/:.lambda. = d (d$\_$0/ if X.leq.c. Since a critical value c can not be determined to satisfy both types of errors .alpha. and .beta., we considered discrimination curve that gives the maximum d such that it can be discriminated from t for a given .alpha. and .beta.. We also considered an algorithm to compute the minimum dwell time which is needed to discriminate at the given .alpha. and .beta. for the Poisson counts and proved its convergence property. For the Poisson-power function distribution, we reject H$\_$0/ if X.leq..'{c}.. Since a critical value .'{c}. can not be determined to satisfy both .alpha. and .beta., similar to the Poisson case we considered discrimination curve and computation algorithm to find the minimum dwell time for the Poisson-power function distribution. We prosent this algorithm and an example of computation. It is found that the minimum dwell time algorithm fails for the Poisson-power function distribution if the aiming error variance .sigma.$\^$2/$\_$2/ is too large relative to the variance .sigma.$\^$2/$\_$1/ of the Gaussian distribution of intensity. In other words, if .ell. is too small, we can not find the minimum dwell time for a given .alpha. and .beta..