• Fisheries and Aquatic Sciences
• /
• v.5 no.1
• /
• pp.48-53
• /
• 2002

The HACCP (hazard analysis critical control point) concept becomes an important aspect of Good Manufacturing Practices (GMP) in safe food production. The HACCP plan was developed with food safety objective. The authors already carried out hazards analysis on Changran Jeotgal manufacturing process in a previous report. In this study we developed a HACCP plan on the manufacturing process of Changran Jeotgal. We could decide two CCPs those were salt concentration and eliminations of foreign materials before packaging. Foreign materials should be certainly checked out with laser detector just before packaging. Salt should be maintained more than $8\%$ to inhibit pathogenic bacteria in end product. On the Jeotgal process free water is removed after salting and Jeotgal is seasoned with several subsidiary materials such as com syrup. In result end products have $8\%$ salt with water activity 0.82. Most bacteria are inhibited but some can live in this condition. Materials on the working may be contaminate by pathogens, chemicals or physical hazards. It will be decreased by SSOP (standard sanitary operating program). The SSOP needed in Jeotgal plants is nearly same as other general food manufacturing plants but essential to fulfill HACCP program.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.397-404
• /
• 2006

Geometric singularity problems are principle difficulties of single-gimbal control moment gyros in spacecraft attitude control. To overcome these singularities, many steering logics have been studied. In this paper, a new null motion steering law is suggested, which is based on the minimization of the directional components of output torque with respect to the required torque. The suggested steering law has been simulated and verified to work well around several critical singular points which have been classified as testing points of avoidance algorithm in previous literatures.

• Journal of Nutrition and Health
• /
• v.18 no.4
• /
• pp.283-292
• /
• 1985

A sanitary quality of a university foodservice establishment was assessed in terms of time and temperature, pH and Aw, and microbiological evaluation. Critical control points during various phases in product flow of fried fish cake soup were identified using hazard analysis concept. The results are summarized as follows : 1) Time and temperature data indicated that phases of holding ingredients at room temperature after cooking, and hot - holding of soup before assembly were critical. 2) pH and Aw values were in favorable for microbial growth. 3) Microbiological data indicated that microbial quality of ingredients was in poor condition. A holding practice of cooked ingredients at room temperature might provide the chance for microbial contamination and multiplication. Hot - holding time and temperature of soup should be strictly controlled to assure the food safety, since the microbial quality of serving food can be directly influenced by the hot - holding temperature of soup. 4) Microbiological test results for food containers, equipments, working surfaces, and supplies indicated that sanitary conditions of earthenware, gloves, wiping cloths and cutting board should be improved promptly. 5) Critical control points identified were : ingredients, pre - preparation, post - preparation, and holding before assembly and service. 6) Guidelines for the effective quality control program for this operation were suggested.

• Journal of the Korean Society of Food Culture
• /
• v.11 no.4
• /
• pp.465-473
• /
• 1996

The purpose of this study was to evaluate microbiological hazards in the steps of production, transportation and selling of hamburger and sandwich that were marketed in CVS, then to identify methods of control. The reasults are as follows: As the reasult of operation surroundings of manufacturerand reserch of circulation, $4{\sim}6$ hours are needed from manufacturer to CVS. Also transportation car mean temperature was $10^{\circ}C$ which exceeds the standard of $7^{\circ}C$ or below. Hamburger: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, microbes of cold holding and reheat after cold holding was within standard value. But in the case of room temperature microbes exceeded standard value. Sandwich: Critical control points identified were purchasing, cooking, post-preparation, transportation and holding at CVS. As the reasult of microbial analysis following the case of holding methods and reheating at CVS, total plate counts of cold holding and reheat after cold holding was within standard value. But in the case of room temperature holding after 24 hours total plate counts exceeded standard value. In the case of room temperature holding the number of microbes increased according to the passage of time. As a reasult of food poisoning bacteria, it was negative in every test in sample against V. parahaemolyticus, Salmonella, S. aureus.

• Journal of the Korean Dietetic Association
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2007

The Purpose of this research was to assess food safety knowledge and perceptions on hygiene education among new owners of restaurant in Gyeongnam area. In the questionnaire survey to 462 new owners of the necessity of hygiene education, more than half of them(56.3%) answered ‘Needed’ while ‘So so(29.2%)’ and ‘No need(14.1%)’ were also not a few. For the questionnaire asked what educational area was most beneficial, ‘Restaurant management and service(53%)’ was the most selected followed by ‘Food safety management and briefing on relevant food safety regulations(20.1%)’, ‘Tax management(12.8%)’ and ‘Food culture and menu development(11.7%)’. According to evaluation on new owners’ food safety knowledge, total average score was turned out to 6.83(out of total score of 15), less than 50% of average correct answers, it signified the demand for quantitative and qualitative improvement on hygiene education. To view the three areas’ evaluation score, characteristics of foodborne illness(2.56 points, out of total 5 points) and general hygiene management(2.54 points) marked more than 50% of correct answers while critical control points marked only 1.73 points, the lowest score.

• Korean Journal of Veterinary Research
• /
• v.60 no.3
• /
• pp.105-108
• /
• 2020

These days abattoirs' hygiene of Korea is regulated by Hazzard Analysis Critical Control Point (HACCP). Although 20 years have been left since first HACCP was adjusted in Korea, 12% of abattoirs got inconsistence on evaluations. Food poisoning caused by bacteria feces like pathogenic Escherichia coli and Salmonella has not decreased. These bacteria on meat cross-contaminate at the abattoir. Therefore, field verification of abattoir's critical control point (CCP) and experiments to find alternative ways of the CCP were conducted. The aerobic bacteria were measured before and after high-pressure water based washing process set as CCP in most abattoirs. Four parts of cattle carcasses were selected to apply sponge-swab method. The effects were < 1 log reduction which is not significant. Lactic acid (LC), chlorine dioxide (ClO₂) and slightly acidic electrolyzed water (SAEW) were used to measure the effect of reducing bacteria on beef by the different time. LC has 1.24-2.02 log reduction for aerobic bacteria. ClO₂ has 1.44-1.96 log reduction for aerobic bacteria. SAEW has 1.1-1.91 log reduction for aerobic bacteria. There was significant difference according to concentrations (p < 0.05). This study presents legitimacy for hygiene improvement of CCP by field verification. In addition, chemical disinfectants that can be mechanically applied have better reduction effects of high-pressure washing.

• Journal of Food Hygiene and Safety
• /
• v.16 no.2
• /
• pp.103-110
• /
• 2001

Predictive food microbiology(PFM) is an emerging area of food microbiology since the later 1980’s. It does apply mathematical models to predict the responses of microorganism to specified environmental variables. Although, at present, PFM models do not completely developed, models can provide very useful information for microbiological responses in HACCP(Hazard Analysis Critical Control Point) system and Risk Assessment. This study illustrates the possible use of PFM models(PMP: Pathogen Modeling Program win5.1) with milk in several elements in the HACCP system, such as conduction of hazard analysis and determination of CCP(Critical Control Points) and CL(Critical Limits). The factors likely to affect the growth of the pathogens in milk involved storage fixed factors were pH 6.7, Aw 0.993 and NaCl 1.3%. PMPwin5.1 calculated generation time, lag phase duration, time to level of infective dose for pathogens across a range of storage (Critical Control Points) and CL(Critical Limits). The factors likely to affect the growth of the pathogens in milk involved storage temperature, pH, Aw and NaCl content. The factors likely to affect the growth of the pathogens in milk involved storage temperature, pH, Aw and NaCl content. The variable factor was storage temperature at the range of 4~15$^{\circ}C$ and the fixed factors were pH 6.7, Aw 0.993 and NaC 1.3%. PMPwin5.1 calculated generation time, lag phase duration, time to level of infective dose for pathogens across a range of storage temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.136-136
• /
• 2017

By-products has been considered lately in Total Mixed Ration (TMR) as an alternative to livestock feed around the world. This is due to the high cost of using forage as feed, less expense in exploring by-products of agriculture origin and environmental concerns with their disposal. However, by-products usually contain contaminants and the production process requires fermentation using a storage and fermentation tank. Animal feed is the start point of the food safety chain in the 'farm-to-fork' model. This necessitated a study to model a protocol that will culminate to safe feed production. Hazard analysis and critical control points (HACCP), a systematic preventive approach to food safety from biological, chemical and physical hazards in production processes that can cause the finished product to be unsafe was explored. Implementation of this model provides a mechanism that ensures product safety is continuously achieved. The entire production process of By-products feed production was evaluated using HACCP wizard software. This includes the plant layout, technical standards, storage and fermentation tank cleansing method, staff assignment, safety control method, and distribution. The potential biological, chemical, and physical hazards that may exist in every step of the production process were identified, and then critical control points (CCPs) were selected. This will ensure the safety of products made from livestock that consumes by-product feed. These includes cheese, milk, beef, etc.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.5
• /
• pp.533-540
• /
• 2016

This study assessed the risk of an oyster-shucking site to establish the hazard analysis critical control point (HACCP) system model by measuring viable cell counts, coliform group Staphylococcus aureus foreign material on oysters, oyster-producing equipment, and washing water. The viable cell count and coliform group levels of the harvested raw oysters were 4.00 log CFU/g and 1.1×10² MPN/100 g, while those of washed oysters were 2.99 log CFU/g and (3.2−4.6) × 10 MPN/100 g, respectively. After washing the oysters, no Escherichia coli or pathogenic bacteria (E. coli O157:H7, Listeria monocytogenes, S. aureus, Salmonella spp., Vibrio parahaemolyticus, and Clostridium perfringens) were detected. Regardless of the location of foreign matter, up to 100% more metallic and non-metallic foreign matter was detected at 1.5 mmΦ than at 3.5 mmΦ, using a metal detector with increased sensitivity. According to the results, the critical control points (CCP) are the washing and metal-detection processes. These results can be used as basic data to improve sanitation at oyster-shucking sites in factories with an HACCP system.

• Journal of KIISE
• /
• v.42 no.6
• /
• pp.769-780
• /
• 2015

Smoothing a digital curve by averaging its connected points is widely employed to minimize sharp changes of the curve that are generally introduced by noise. An appropriate degree of smoothing is critical since the area or features of the original shape can be distorted at a higher degree while the noise is insufficiently removed at a lower degree. In this paper, we provide a mathematical relationship between the parameters, such as the number of iterations, average distance between neighboring points, weighting factors for averaging and the moving distance of the point on the curve after smoothing. Based on these findings, we propose to control the smoothed curve such that its deviation is bounded particular error level as well as to significantly expedite smoothing for a pixel-based digital curve.