• 제목/요약/키워드: Critical Condition

검색결과 2,011건 처리시간 0.033초

바지락패곡의 형태변이와 바지락의 장형, 단형의 형태적 특성에 관하여 (On the Morphological Variations and Special Feature of the Elongated and the Stunted Forms in the Short Necked Clam, Tapes japonica)

  • 최상
    • 한국동물학회지
    • /
    • 제8권1호
    • /
    • pp.1-7
    • /
    • 1965
  • The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

  • PDF

근해저인망류어업에 있어서 업종별 경합관계 형성에 관한 사적고찰 (A Historical Consideration on the Evolution of Competition in Offshore Fisheries)

  • 김병호
    • 수산경영론집
    • /
    • 제35권1호
    • /
    • pp.23-56
    • /
    • 2004
  • The offshore trawl fishery is seeking its survival way to overcome current management conditions in red, resulted from the bilateral agreement with China and Japan. However, this movement magnifies conflicts between fisheries on the contrary and it is thought to be impossible to get over current situations. For all that, this study is aimed at investigating how this current situations have occurred. The management freedom as response to the change in fishing conditions of a certain fishery, in case of Korea, is affected by institutional regulations. The example of this is controls on fishing gears, fishing vessels, and fishing grounds. The most exposure of this control is a segmentation of institutional fisheries. The initial segmentation of the offshore trawl fishery in Korea was occurred in the period of Japan's colonization when the degree of use of fishing grounds was limited geographically. At that time, fisheries were divided by fishing areas, but it did not divide the fishery itself. The large - sized fishing vessels were developed politically to be more competative to Japanese fishing vessels since 1950s. During this time, the trawl fishery was merged into current Eastern trawl fishery and South - Western trawl fishery. It was also inevitable to divide into the pair trawl and single trawl fishery as a result of the physical mergency between Western trawl and Southern trawl fishery. In order to develop the trawl fishery, new licenses were issued on the shrimp trawl fishery, through which it was expected to boost the trawl fishery. As opposed, the shrimp trawl fishery was changed into the mid - sized trawl fishery, targeting on the eastern fishing areas and the large - sized trawl fishery was developed since the late of 1970s with the development of filefish processing industry. The large trawl fishery that led in development of offshore trawl fishery since the late of 1950s was started to divide into a pair trawl and single trawl according to the fishing method and capital power. It finally became an institutionally independent fishery in 1980s, respectively. Looking into these historical process, the segmentation of the trawl fishery is thought as a result of the lack of long - term perspective and as a production of trial and error resulted by unprepared policy. As a result, these segmentation of fisheries roles as critical obstacles in harmonization of fisheries and in overcoming of current situations. Therefore, the review of this institutional segmentation of the offshore trawl fishery should be taken for an optimal redistribution of fishing grounds suits with business and fishing technology. For this, the fishery must be divided into large capitalized fishery and small - mid fishery with consideration of capital, fishing method, and the condition of use of fishing grounds. In addition to this, by limiting outline of fishing ground that the large fishery can harvest, it must allow for the small - mid fishery to catch with its own boundary. Furthermore, by launching buyback programs on the trawl, eastern trawl, pair trawl, it can provide broader fishing grounds where the fishery can harvest with management freedom.

  • PDF

대북 사회공헌형 산림탄소상쇄사업 모니터링 여건평가 (Evaluating Monitoring Condition for Forest Carbon Offset Project to Demonstrate CSR in North Korea)

  • 주승민;허만호;김종달;엄정섭
    • Spatial Information Research
    • /
    • 제23권2호
    • /
    • pp.11-20
    • /
    • 2015
  • 모니터링은 북한지역을 대상으로 하는 사회공헌형 산림탄소상쇄 사업을 진행하는 과정에서 핵심요건으로 부각되고 있다. 온실가스 감축 여건에 대한 모니터링이 잘못되었을 경우, 입증수단과 방법을 사전에 점검하여 리스크와 불확실성을 최소화하여야 한다. 따라서 본 연구의 목적은 산림탄소상쇄사업에서 발생할 수 있는 입증책임에 관련된 쟁점들을 사전에 점검하고자 백두산을 대상으로 모니터링 여건(사업대상지의 적합성, 산림 바이오매스 성장에 따른 탄소축적, 바이오매스의 손실, 삼림 전용 및 훼손 여부, 환경, 사회, 경제적 영향에 의한 탄소 배출량)을 평가하였다. 인공위성 영상은 백두산의 산림현황을 가시적인 기록으로 제시하였는데, 대북 산림탄소상쇄사업에서 모니터링이 필요한 지표를 대부분 충족하는 것으로 확인되었다. 본 연구 결과는 북한에서 산림탄소상쇄 사업을 수행하려는 한국기업에게 중요한 참고자료로 활용될 수 있을 것으로 판단된다.

인프라 독립형 가변안내표지판의 효율적 전력 운영 방안 연구 (A Study of Effective Power Management for Infrafree Variable Message Sign)

  • 임세미;이지훈;박준석;김병종;김원규;손승녀
    • 한국ITS학회 논문지
    • /
    • 제10권6호
    • /
    • pp.53-62
    • /
    • 2011
  • 지능형교통정보시스템(ITS) 정책의 일환으로 가변안내표지판의 보급이 확대되었음에도 불구하고 여러 가지 문제점들이 나타나게 되었으며 그 중 하나가 지역별 교통 정보 제공의 불평등 및 비효율성 문제이다. 본 논문에서는 전력선 및 통신선 구축이 어려운 인프라 취약 지역에서도 도로상황 및 기상상태 등의 교통정보 제공을 위해 인프라 독립형 가변안내표지판을 제안하였다. 인프라 독립형 가변안내표지판은 인프라 취약지역에서 운영되므로 그 특성상 시스템 구성, 운영방안 등에서 일반형 가변안내표지판과는 차별성을 가지므로 그 특성을 분석하여 나타내었다. 또한 태양광 발전으로 획득된 한정된 전력을 효율적으로 운영하기 위하여 이를 고려한 배터리 체결구조와 가변안내표지판의 표출 메시지에 따른 전력 운용 방안을 제안하였다. 향후 본 연구의 결과를 토대로 인프라 독립형 가변안내표지판뿐만 아니라 병렬 구조의 배터리가 사용되는 다양한 용도의 어플리케이션의 전력 제어에 적용 가능할 것으로 예상된다.

Characterizations of Yields and Seed Components of Sesame (Sesamum indicum L.) as Affected by Soil Moisture from Paddy Field Cultivation

  • Chun, Hyen Chung;Jung, Ki Yuol;Choi, Young Dae;Lee, Sanghun;Kim, Sung-Up;Oh, Eunyoung
    • 한국토양비료학회지
    • /
    • 제50권5호
    • /
    • pp.369-382
    • /
    • 2017
  • Accurate and optimal water supply to cereal crop is critical in growing stalks and producing maximum yields. Recently, upland crops are cultivated in paddy field soils to reduce overproduced rice in Korea. In order to increase productivity of cereal crops in paddy fields which have poor percolation and drainage properties, it is necessary to fully understand crop response to excessive soil water condition and management of soil drainage system in paddy field. The objectives of this study were to investigate effects of excessive soil water to sesame growth and to quantify stress response using groundwater levels. Two cultivars of sesame were selected to investigate; Gunbak and Areum. These sesames were planted in paddy fields located in Miryang, Gyeongnam with different soil drainage levels and drainage systems. The experiment site was divided into two plots by drainage class; very poorly and somewhat poorly drained. Two different drainage systems were applied to alleviate excessive soil water in each plot: open ditch and pipe drainage system. Soil water contents and groundwater levels were measured every hour during growing season. Pipe drainage system was significantly effective to alleviate wet injury for sesame in paddy fields. Pipe drainage system decreased average soil moisture content and groundwater level during sesame cultivation. This resulted in greater yield and lignan contetns in sesame seeds than ones from open ditch system. Comparison between two cultivars, Gunbak had greater decrease in growth and yield by excessive soil water and high groundwater level than Areum. Seed components (lignan) showed decrease in seeds as soil water increased. When soil moisture content was greater than 40%, lignan content tended to decrease than ones from less soil moisture content. Based on these results, pipe drainage system would be more effective to reduce wet injury to sesame and increase lignan component in paddy field cultivation.

정보 엔트로피에 의한 RC 교량 상판의 상태속성 및 등급 영향 구조 분석 (The State Attribute and Grade Influence Structure for the RC Bridge Deck Slabs by Information Entropy)

  • 황진하;박종회;안승수
    • 한국전산구조공학회논문집
    • /
    • 제23권1호
    • /
    • pp.61-71
    • /
    • 2010
  • 기 수행된 1, 2종 교량에 관한 정밀안전진단 등의 많은 사례를 분석해 보면, 실제로 많은 경우 외관상태가 교량의 대표등급 결정에 지배적인 요인이 되는 것을 볼 수 있다. 본 연구는 기 시행된 점검 및 진단 자료를 학습사례집합으로 인공지능 분야의 귀납적 학습법을 활용하여 철근 콘크리트 교량 바닥판의 상태평가를 지배하는 상태속성들의 교량등급에 대한 계층적 영향도와 구조적 연관성을 분석하였다. 이는 세부적으로 목표속성은 평가등급으로, 평가속성은 1방향균열, 2방향균열, 백태, 박락 및 층분리, 재료분리 등 7가지로 구성하고, 엔트로피 분석을 통해 주요 속성의 정보량, 정보기대값 및 정보 이득을 산정하고 범주별 상태 등급 분포를 분석하였다. 이를 위해 본 논문은 먼저 6개 교량에 대한 안전진단보고서를 토대로 상태등급 평가 과정에서 각 속성이 미치는 간접적 영향을 개관하고 정보공학적 분석의 동기를 부여하였다. 아울러 본 연구는 정보 변별력에 대한 순서로 평가를 지배하는 주 속성 및 조건별 하위 속성 연관성을 의사결정트리 형태로 나타내어 계층적 영향 및 속성간의 구조적 연관성을 보임으로써 손상에 대한 이해도를 높이고 차후 상태평가를 위한 합리적 접근을 지원할 수 있도록 하였다.

청소년의 학업중퇴 적응과정에 대한 현실기반이론적 접근 (A Grounded Theory Approach on the School Dropout of Adolescents in Korea)

  • 박현선
    • 한국사회복지학
    • /
    • 제53권
    • /
    • pp.75-104
    • /
    • 2003
  • 본 연구에서는 한국의 교육제도라는 현실에 기반하여 청소년들의 학업중퇴의 경험을 분석함으로써 학업중퇴 청소년들의 경험과정과 유형을 도출하고자 했다. 이를 위해 학업중퇴 경험이 있는 만 16세-23세의 청소년 30사례를 대상으로 심층 면접했고, Strauss와 Corbin의 현실기반이론 접근을 통하여 분석하였다. 분석 결과 한국 청소년들의 학업중퇴 경험은 학교라는 제도의 구속으로부터는 해방되지만 학생 신분으로서 누릴 수 있는 다양한 소속감과 혜택을 모두 상실, 포기해야 하는 모순된 경험과정으로 나타났다. 청소년들이 학교를 중퇴하는 원인으로는 자기실현욕구에서부터 학교좌절, 상처, 비행 등에 이르기까지 다양했으며 대부분 원인들이 복합적, 순차적으로 기여하는 것으로 나타났다. 또한 중퇴가 이루어지는 형식이 자발적이었는지 얼마나 이후의 생활에 대해 고민하고 준비했는지가 중요한 조건으로 나타났다. 한편, 학업 중퇴 결정을 내린 이후 과정에서는 주변의 정서적 또는 정보적 지원이 있었는지 여부에 따라 새로운 시도에 대해 적극적 또는 소극적이 될 수도 있었다. 이상에서 도출한 주요 조건에 따른 유형화를 시도한 결과, 성공적인 '자기탐구형'에서부터 지속적인 시행착오과정에 있는 '혼란형', 무조건 나오고 보자 해서 나온 '탈출형', 비행 문제도 심각한데다가 개인적, 환경적 자원도 가장 열악하여 중퇴를 계기로 더 힘든 나락으로 떨어지게 되는 '자포자기형'으로 구분되었다. 한편, 시간적 순서를 통해서 살펴본 과정 분석에서는 의미상실의 단계, 탈학교 단계, 사회적 실험과 경험의 단계, 새로운 의미부여 단계의 4단계로 이루어지는 것으로 나타났다. 논의에서는 이러한 결과를 기반으로 학업 중퇴라는 결정이 내려지기까지 그리고 이후에 어떠한 적응과정을 겪는지를 확인함으로써 각 유형에 따른 적응 과정별 원조방안에 대해 논의하였다.

  • PDF

이온빔 보조 증착법에 의한 TiN 박막도포가 니켈-크롬-베릴륨 합금의 표면 성상에 미치는 영향에 관한 연구 (A STUDY OF ION BEAM ASSISTED DEPOSITION(IBAD) OF TiN ON Ni-Cr Be ALLOY FOR SURFACE CHARACTERISTIC)

  • 최수영;이선형;장익태;양재호;정헌영
    • 대한치과보철학회지
    • /
    • 제37권2호
    • /
    • pp.212-234
    • /
    • 1999
  • Dental restorative materials must have the physical properties to withstand wear and corrosion. Base metal alloys possess better mechanical properties and lower price than the gold alloys. For these reasons such alloys have largely replaced the precious metal alloys. One aspect to con-sider is the release of metal substances to oral environment. The release of elements from dental alloys is a continuing concern because the elements may have the potentially harmful biological effects on local tissues. The purpose of this study was to minimize metal release on the nonprecious metal surfaces by ion beam assisted deposition(IBAD) of titanium nitride (TiN) Ni-Cr-Be alloys with and without TiN coatings were secured in an wear test machine opposing ruby ball to determine their relative resistance to wear with loom, 200m, 300m and 400m sliding distance. And the corrosion behavior of the Ni-Cr-Be alloys with and without TiN coatings and 3 dental noble alloys have been studied. Potentiodynamic curves were used to analyse the corrosion characteristics of the alloys. The measurement of the released Ni and Cr ions was conducted by analysis of the electrolyte solution with atomic absorption spectroscopy. The results were as follows : 1. The critical sliding distance that wore down TiN coatings of $2.5{\mu}m$ thickness in this study condition was 300m. 2. Ion beam assisted deposition of TiN showed a good surface modification with respect to the properties of wear and corrosion resistance. 3. X-ray diffraction showed that the strongest peak of TiN is TiN(111) in the coatings. 4. The release of Ni and Cr ions from alloys measured by means of atomic absorption spectroscopy was reduced by ion beam assisted deposition of TiN.

  • PDF

음성압축 방식의 변화가 한국어 단음절 숫자 인지기능에 미치는 영향의 비교 연구 (Comparative Studies of Perceiving Korean Monosyllabic Digit Words under Different Speech Compression Schemes)

  • 임덕환;원유경
    • 한국음향학회지
    • /
    • 제32권3호
    • /
    • pp.262-268
    • /
    • 2013
  • 다양한 음성 압축방식이 여러 분야에서 광범위하게 사용되고 있으며 그 심리음향적 인지결과는 대상 언어의 특성과 압축 방식에 따라서 다를 수가 있다. 한국어에서도 이러한 인지 결과를 비교하는 정량적인 자료가 관련된 임상이나 응용 분야에서 필요하지만 구체적인 내용이 확인되어 있지 않다. 본 연구에서는 통제된 언어적 특성을 갖는 0에서 9까지 한국어 단음절 숫자 들이 무작위로 조합되는 다섯 쌍 조합(quintet set)을 대상으로 하여 자주 사용되는 세가지 대표적인 음성 압축방식의 특성을 비교 분석하였다. 비교 기준으로는 기존의 연구에서 분석 정리된 시간과 주파수 정보가 모두 일정하게 변화되는 PNT (Preserving No Trait) 압축에서 얻은 자료를 비교 근거로 선정하였다. 이를 기준으로 하여 동일한 조건의 정상인 그룹에서 심리음향적 피치(pitch) 정보가 주로 보전되는 PPT (Preserving Pitch Trait), 시간 정보가 주로 보전되는 PTT (Preserving Time Trait) 압축방식의 인지 결과를 기록하고 분석하였다(N=20). 본 연구 결과에서 얻어진 자료를 보면, 정보의 압축비율이 높을 수록 심리음향학적으로 중요한 주파수 정보(피치)를 보전하는 것이 인지도 측면에서 가장 유리한 것으로 나타났다(PPT>PTT>PNT). 또한, 세가지 압축방법에서 50% 인지율을 보이는 압축률의 역치도 PPT가 20%, PTT가 42%, PNT가 44% 순으로 나타났다. 따라서 인지도 측면에서만 살펴보면 본 조건에서는 PPT 압축 방식이 가장 우수한 것으로 추정되었다. 이러한 숫자 자극을 이용한 평가 방법은 향후 새로운 압축 방식의 효율성과 인지도 측면을 비교 가능하게 하며, 이를 이용하면, 청각정보처리기능을 진단하거나 압축 관련 특수 보청기 적합 재활에서 정량적인 지표를 제공하는 도구로도 사용될 수 있을 것으로 판단된다.

A dryout mechanism model for rectangular narrow channels at high pressure conditions

  • Song, Gongle;Liang, Yu;Sun, Rulei;Zhang, Dalin;Deng, Jian;Su, G.H.;Tian, Wenxi;Qiu, Suizheng
    • Nuclear Engineering and Technology
    • /
    • 제52권10호
    • /
    • pp.2196-2203
    • /
    • 2020
  • A dryout mechanism model for rectangular narrow channels at high pressure conditions is developed by assuming that the Kelvin-Helmholtz instability triggered the occurrence of dryout. This model combines the advantages of theoretical analysis and empirical correlation. The unknown coefficients in the theoretical derivation are supported by the experimental data. Meanwhile, the decisive restriction of the experimental conditions on the applicability of the empirical correlation is avoided. The expression of vapor phase velocity at the time of dryout is derived, and the empirical correlation of liquid film thickness is introduced. Since the CHF value obtained from the liquid film thickness should be the same as the value obtained from the Kelvin-Helmholtz critical stability under the same condition, the convergent CHF value is obtained by iteratively calculating. Comparing with the experimental data under the pressure of 6.89-13.79 MPa, the average error of the model is -15.4% with the 95% confidence interval [-20.5%, -10.4%]. And the pressure has a decisive influence on the prediction accuracy of this model. Compared with the existing dryout code, the calculation speed of this model is faster, and the calculation accuracy is improved. This model, with great portability, could be applied to different objects and working conditions by changing the expression of the vapor phase velocity when the dryout phenomenon is triggered and the calculation formula of the liquid film.