• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.529-533
• /
• 2017

In this work, a new type of biosorbent was prepared from the biochar of Liriodendron tulipifera L. by adding an activation process using water vapor. By using the biosorbent, the removal characteristics of nikel ions in the water phase were investigated. When the equilibrium experiments to remove both 5 and 10 mg/L of nikel ions were performed, the adsorption amount of nickel ions was 4.2 and 5.4 mg/g, respectively. Also, the optimal initial pH was 6 to increase the removal efficiency with respect to two different nickel concentrations of 5 and 10 mg/L. To enhance the removal efficiency of 10 mg/L of nikel ions, a chemical treatment using critic acid was applied for the biosorbent. In addition, 100% removal efficiency was observed for 10 mg/L of nikel ions when the experiment was conducted for 2 h using the modified biosorbent treated by 4 M of critic acid. The results of desorption experiment to recover nikel ions indicated that 0.1 M of nitrilotriacetic acid (NTA) was selected as the optimal desorption agent. Consequently, these experimental results could be employed as an economical and environmentally friendly technology for the development of nickel removal processes.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.879-884
• /
• 2012

In this present study, Aspergillus niger NRRL 567 was cultivated on an inert support material and the effects of various fermentation parameters including temperature, nutrient solution pH, inoculation level, and moisture content were observed and optimized by one-factor-at-a-time (OFAT) and response surface methodology (RSM), sequentially. It was found that the incubation temperature of $30^{\circ}C$ with 75% moisture content, nutrient solution pH of 7.1 and inoculation level of $4.0{\times}10^6$ spores/ml were the most favorable. Again, fermentation parameters were optimized using RSM. The determined optimum condition is $26.5^{\circ}C$, pH 9.9, 75.1%, and $6.0{\times}10^6$ spores/ml. Under this optimized condition, A. niger NRRL 567 produced 118.8 g citric acid/kg dry peat moss at 72 hr. Maximum citric acid production of optimized condition by RSM represented a 1.6-fold increase compared to that obtained from control experiment.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.6
• /
• pp.877-883
• /
• 2014

This study investigated the manufacturing conditions of apple vinegar with high acetic acid content following fermentation according to alcohol concentration without any nutrients. We compared and analyzed the quality characteristics of high acetic acid fermentation by varying the initial alcohol content (6%, 7%, 8%, and 9%). In the results, it was possible to manufacture high acetic acid vinegar with 12% titratable acidity and an alcohol content of 6% and 7%. Lower initial alcohol content was associated with higher yield due to a shorter lag phase. For quality characteristics of the high acetic acid apple vinegar, pH was 2.91~3.20, titratable acidity was 12.0%, and organic acid consisted of acetic acid, malic acid, critic acid and oxalic acids. Based on the results, high acetic acid apple vinegar was produced using a two stage fermentation process after alcohol fermentation but the further research is needed to reduce the time of fermentation in fed-batch culture for industrial use.

• Korean Journal of Food Science and Technology
• /
• v.26 no.4
• /
• pp.348-354
• /
• 1994

Chitin and chitosan samples prepared from crab's shells under different conditions were compared for their physicochemical properties; and functionality in gastrointestinal tract by in vitro test. Their bulk density was in the range of $127{\sim}208\;mg/ml$, and their viscosity was $80{\sim}581\;cP$ in 0.1 chitin and $80{\sim}3,670\;cP$ in 0.5% chitosan solution, showing a wide variation. The degree of deacetylation in chitosan samples as determined by IR spectral analysis was relatively high, showing $81{\sim}93%$. At the same alkali concentration and reaction temperature, a longer reaction period gave an increased degree of deacetylation and lower viscosity. The water holding capacity of chitic substance became greater at higher soaking temperature; chitosan D at $37^{\circ}C$ showed the greatest value. Chitic substance with lower bulk density showed the higher water holding capacity. The retardation effect toward glucose absorption was higher in critic substances of lower density and higher water holding capacity; chitosan D showed the highest value of 38%. The retardation index toward bile acid absorption after 1 hour dialysis was $15{\sim}34%$ in chitic substances, 39% in pectin and 9% in cellulose. The retarding effect showed the highest value of 34% in chitosan D at 3% concentration.