• Title/Summary/Keyword: Criteria for classifying

Search Result 160, Processing Time 0.025 seconds

A Study on the Foundation of the Standard of Temperature and Humidity for Preventing Condensation in Apartment Housings (공동주택 세대내 결로방지 설계를 위한 실내외 온습도 기준 수립 연구)

  • Hwang, Ha-Jin;Kim, Jong-Yeop;Lee, Jong-Sung
    • Land and Housing Review
    • /
    • v.2 no.3
    • /
    • pp.269-276
    • /
    • 2011
  • Recently, the chance of dew condensation in apartment buildings is increasing because of several reasons. For example, ventilation rate has been decreased because of high-insulations and airtightness for saving energy. Besides, the humidity has been made by drying washes, cooking and bathing inside of apartment buildings. However, there is lack of resonable design criteria for preventing condensation in real life and real surroundings. Therefore, this study is aimed at making a resonable design criteria of preventing condensation by measuring the indoor temperature and humidity in real life. In addition to this, it is aimed at making a resonable outdoor condition and classifying regions by using weather data. The following are the results. The interior criterion for condensation was set up $25^{\circ}C$ and a relative humidity of 55%. The outdoor criterion for condensation was set up $20^{\circ}C$, $-15^{\circ}C$, and $10^{\circ}C$ respectively for the hard frost, middle, and southern areas.

Court's Criteria for Judging Research Misconduct and JRPE Goals

  • HWANG, Hee-Joong
    • Journal of Research and Publication Ethics
    • /
    • v.1 no.1
    • /
    • pp.23-28
    • /
    • 2020
  • Purpose: Focusing on Supreme Court precedents, we intend to establish criteria for judging research misconduct. Research design, data and methodology: In addition, I would like to propose the criteria for judging research misconduct by the KODISA, which applies the court's standards well in practice, and guidelines for preventing research misconduct. Research design, data and methodology: After classifying the case of research misconduct into six cases, the court's judgment and practical application will be reviewed. Results: First, research misconduct that has passed the disciplinary prescription can be punished. This is because the state of illegality continues to this day. Second, even if there were no punishment regulations at the time of research misconduct, it can be retroactively punished with the current punishment regulations. This is because research ethics is a universal and common standard and does not change. Third, if there is a fact that infringes on intellectual property rights, it is presumed unwritten intentions. Therefore, the act of taking and using the work of another person without permission or proper citation procedure, even if it is unintentional and for the public interest, is a research misconduct. Fourth, if there is an inappropriate citation notation, the intention of research misconduct is presumed. It is the judgment of the court that even if a quotation is marked, if it is incomplete, it is recognized as plagiarism. Fifth, if the author uses the work of another person without proper source indication, it is plagiarism even if the other person who owns the copyright agrees to it. The understanding or consent of some parties does not justify research misconduct in violation of public trust. Sixth, it is a research misconduct to create a new work without citations for one's previous work. In addition, even if there is a citation, if the subsequent writing is not original, it is a research misconduct. Conclusions: Academia should clarify the scope of research misconduct by referring to the Research Ethics Regulations of KODISA, and deal with research results that lack the value as creative works similar to those of research misconduct.

The recognition response research of five sences for the first accident occurrence cognizance and spread through the analysis of railroad accident type at domestic and foreign (국내.외 철도사고유형 분석을 통해 초기 사고발생 인식.전파를 위한 오감인지 대응연구)

  • Yang, Doh-Chul;Hwang, Seong-Geun
    • Proceedings of the KSR Conference
    • /
    • 2007.05a
    • /
    • pp.1180-1186
    • /
    • 2007
  • This paper contains that the current emergency response procedure through the railroad accident type at domestic and foreign, and the response program which is more systematic as a result of improving weaknesses. Because the response program at home is less sufficient than developed country's, we have made an investigation into system of classification in America, British, Germany, Japan for organizing separate emergency response code. we have researched the recognition response of five senses for minimizing the accident damage in a way of spreading the emergency response type analyzed through the accident procedure according to the feature of five senses by the first recognizer. Based on the first recognitions response of five senses, the scenario has been established according to each types and the criteria of accident has been researched through classifying the recognition of five senses response level, early response level, self-response level, outside support level.

  • PDF

General Cytological Characters of Malignant Breast Lesions (유방의 세침흡인 세포검사 -악성 병변의 일반적인 세포 소견-)

  • Kim, Jee-Yeon
    • The Korean Journal of Cytopathology
    • /
    • v.18 no.2
    • /
    • pp.100-111
    • /
    • 2007
  • Fine needle aspiration (FNA) cytology of breast disease is recognized to be highly accurate and cost effective, especially when this is used in combination with clinical examination and imaging as part of a triple approach. A probabilistic/categorical approach is used for the classification of breast FNA specimens. Criteria are defined from the perspective of the likelihood of making a definitive diagnosis of cancer on excision. This approach is an accurate way of classifying breast FNA specimens, and this can be reliably applied regardless of the level of experience of the pathologist for interpreting the case. When a definitive diagnosis of malignancy is made, the next step is to determining the specific histologic types of the malignancy according to their cytological features. In order to make an accurate diagnosis of carcinoma and for correct typing a tumor, an adequate, correctly sampled aspirate without any other artifacts is required.

A Test on Total Quality Management Practices in South Korea's Environmental Pollution Prevention Industry (우리나라 環境汚染防止産業과 總體的 品質經營의 檢證)

  • 성삼경;한은주
    • Journal of Korean Society for Quality Management
    • /
    • v.25 no.4
    • /
    • pp.1-15
    • /
    • 1997
  • We performed the two analyses of variance to determine the total quality management practices in the environmental pollution prevention industry by classifying the companies based on the size (large or medium/small) and on the type (manufacturing or service). A few previous studies reveal that in Korea the large companies are not the same as the medium/small companies in the TQM practices while the practices are not alterated by the type of companies whether manufacturing or service. But in the United States the TQM practices are not affected by the size of the company. Su, pp.rting the previous studies on the Korean industry our studies show that the TQM practices are significantly influenced by the company size, but not by the type of the company. Taking the results of our studies into consideration we would also like to propose a revision of examination criteria for National Quality Management Award with special emphasis given to medium/small companies.

  • PDF

A Development of the Design Guidelines for Connecting Roads in Highway Rest Area (고속도로 휴게소 연결로 설계 기준 설정에 관한 연구)

  • Lee, Choulsoo;Won, Jaimu
    • International Journal of Highway Engineering
    • /
    • v.15 no.1
    • /
    • pp.143-154
    • /
    • 2013
  • PURPOSES: Design of approach roads of rest areas in highway has many drawbacks such as geometric design elements. There has been traffic accidents occured in these approach roads of rest areas. Thus, design criteria is required in order to protect accidents from being occurred. In case of Korea, geometric structure design criteria of entry facilities, such as toll-gate, interchange, junction etc was established. However there are no presence in a detailed standards for geometric structure of the rest area which affiliated road facilities. METHODS: In this study, analytic on accidents was carried out in regards to the entry of geometric structure of resting areas by utilizing a sight survey and an investigation research of traffic accidents. The survey was targeting 135 general service areas. Collisions with physical channelization and safety facilities occurred due to speeding, rapid entry, and etc at the entrance nose section. At the entrance connector roads, accidents caused by speeding, negligence, over-operation of handle of drivers were main reason of accidents. Discriminant analysis were conducted about geometric elements to distinguish influencing factors for traffic accidents. the lengths and access angles of the entrance connector roads were regarded as to have the high relation with traffic accidents. RESULTS: After classifying the design section of resting areas' entry as well as derive design elements on each section, a speed measurement by targeting entry of rest areas and car behavior surveys were performed, then each element's minimum standard was derived through the analyses. According to the speeds at the starting/end point of entrance connector road, the range of the junction setting angle of the entrance connector road is defined as $12^{\circ}{\sim}17^{\circ}$ and the connector length model was suggested. CONCLUSIONS: Suggest improvement plans for existing rest areas that can be applied realistically. This should be corresponded to the standards of entry and exit of developed rest areas.

A Study on the Unmanned Transportation Systems of the Seventh Edition of Harmonized System: Focusing on the Section 17 of HS Nomenclature (제7차 HS 협약 개정에 따른 무인 수송기기 품목분류에 관한 연구: 제17부를 중심으로)

  • Jin-Kyu Kim;Yoon Lee
    • Korea Trade Review
    • /
    • v.46 no.5
    • /
    • pp.49-63
    • /
    • 2021
  • The HS Convention is an agreement on the harmonized commodity description and coding system enacted by the World Customs Organization in January 1988 to promote international trade and unify the commodity classification systems internationally, and the seventh revision will take effect in January 2022. This study's main purpose is to consider criteria for classifying unmanned autonomous transport systems(UATS) in accordance with Section 17 of the HS nomenclature and to present recommendations for improvement of laws related to tariff classification which may be used to amend related laws in Korea. Currently, there are no provisions within the HS Nomenclature that classify unmanned autonomous transportation systems and equipments. Although such technologies have yet to be commercially deployed, they are being actively developed globally. Thus, this study aims to classify UATS and suggest appropriate amendments to the new edition of the HS Nomenclature and Korean law. This paper examines advance ruling cases from domestic and foreign HS classification under the revision of the HS Convention and the criteria for the classification of UATS and Domestic Korean and foreign classification case studies were investigated, along with a survey of the literature on UATS, in order to derive reasonable tariff classification criteria and present legislative implications. In conclusion, this study aims to provide legislative recommendations for how to improve the system to apply the revisions to the HS Convention to the domestic Korean statutes.

Effect of the Service Providers′Perceived Service Quality on Customer Loyalty in Restaurants (외식 서비스 제공자의 서비스 품질 인식이 고객 충성도에 미치는 영향)

  • 김혜영;양일선;신서영
    • Korean Journal of Community Nutrition
    • /
    • v.5 no.2
    • /
    • pp.236-242
    • /
    • 2000
  • Due to the diversification of the food industry and its heightened competition, the marketing strategy to be required the most would be to improve competitiveness by enhancing customer loyalty as a resulting variable of customer satisfaction. Thus, this study, taking a food service provider as a subject, is to find factors and the scope of the perceived quality ; and to analyze how far the perceived service quality factor as such could explain customer′s overall satisfaction and customer loyalty ; finally to provide basic data for establishing a customer satisfaction marketing strategy as related to customer loyalty. The results of the study are as below. 1) 25 factors of service quality perceived by a food service provider have been categorized into 8 independent dimensions through factor analysis. Each of them are named ′Employee attitude′, ′Cleanliness′, ′Reputation′, ′Reliability′, ′Food′, ′Price′, ′Convenience′, ′Variety′, all of which explain 64.3% of the service again quality perception level. 2) After classifying customers into 3 groups according to two criteria -"will buy the service again" and "will suggest it to others" and making a pair of service providers with each customer, each customer loyalty group compared the service quality perception factor of the food service provider. The result was that the group having both the " will buy the service again" and "will suggest to others" criteria, that is, with higher loyalty, tend to have higher points than other group s in the dimension of ′Employee attitude′ and ′ Cleanliness′(p〈0.05), which means these two dimensions are closely related to customer loyalty. 3) From a regression analysis for the service quality perception level of the food service provider and overall satisfaction, it has been found that : the regression models are different for each group, that ′Employee attitude′ seems to be related more closely to the group with higher loyalty(p〈0.05); that the ′Price′dimension is found to be a meaningful factor to the group categorized not having "will buy the service again" and "will suggest to others" criteria(p〈0.05).

  • PDF

A New Support Vector Compression Method Based on Singular Value Decomposition

  • Yoon, Sang-Hun;Lyuh, Chun-Gi;Chun, Ik-Jae;Suk, Jung-Hee;Roh, Tae-Moon
    • ETRI Journal
    • /
    • v.33 no.4
    • /
    • pp.652-655
    • /
    • 2011
  • In this letter, we propose a new compression method for a high dimensional support vector machine (SVM). We used singular value decomposition (SVD) to compress the norm part of a radial basis function SVM. By deleting the least significant vectors that are extracted from the decomposition, we can compress each vector with minimized energy loss. We select the compressed vector dimension according to the predefined threshold which can limit the energy loss to design criteria. We verified the proposed vector compressed SVM (VCSVM) for conventional datasets. Experimental results show that VCSVM can reduce computational complexity and memory by more than 40% without reduction in accuracy when classifying a 20,958 dimension dataset.

Exemplary Mathematics Assessment Tasks in Quadratic Functions (함수 단원 평가 과제의 실천예시)

  • 고상숙;이석현
    • The Mathematical Education
    • /
    • v.43 no.2
    • /
    • pp.163-175
    • /
    • 2004
  • We believe new assessment strategies and practices need to be developed that will enable teachers and others to assess students' performance in a manner that reflect the 7th Korean curriculum reform vision for school mathematics. This research was conducted to develop the assessment tasks based on the current literatures such as National Council of Teachers of Mathematics (1999) and Korea Institute of Curriculum & Evaluation(KICE, 2002, 2003) in quadratic functions of the secondary school and to find the effect of these tasks by classifying students' responses. The research instrument were composed of three criteria, the previous knowledge, the application of quadratic functions, and the general properties in functions. The research data were collected from 32 high school students in a suburb of Seoul and sorted by their similarities and differences in mathematical understanding. Through the research, we could know more than ever before about how the students learned mathematics and about how to improve teachers' mathematical instruction.

  • PDF