• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1999년도 가을 한국섬유공학회 학술발표회 논문집(Proceedings of the Korean Textile Conference)
• /
• pp.135-138
• /
• 1999

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1996년도 추계 학술발표회
• /
• pp.396-400
• /
• 1996

• Fibers and Polymers
• /
• 제4권2호
• /
• pp.84-88
• /
• 2003

The properties of a woven fabric made of poly(trimethylene terephthalate) (PTT) were investigated. The PTT fab-ric of draw textured yarn (DTY) showed excellent stretch as good as a fabric containing spandex. However, the unique stretch of the PTT fabric reduced dramatically by simple heat-treatment even at as low as $80^{\circ}C$. To understand the phenomenon, the crimp rigidity of the DTY was observed by SEM. It was found that the drastic reduction of stretch was caused by irreversible uncrimping of PTT DTY after heat-treatment. Conclusively, it is of importance to optimize the texturing conditions for PTT DTY to make the crimp more stable.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.849-856
• /
• 2006

In this paper, fabric composite draping on hemisphere moulds were studied to find out the deformation behaviour of micro-tow structures of fabrics during draping and thermoforming. Aluminium and PVC foams were used to fabricate the hemisphere moulds for draping tests. In order to observe the local tow deformation pattern during the draping several specimens for microscopic observation were sectioned from the draped hemisphere structures. The effect of forming condition and mould properties on tow deformation was investigated by the microscopic observation of the tow parameters such as crimp angle. Normalization scheme was performed to compare tow parameter variations with different forming conditions. Stress-strain .elations of two different PVC foams (HT70 and HT110) were tested to investigate the effect of foam property on the micro-tow deformation during forming.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1757-1764
• /
• 1997

The geometric and elastic models based on the unit cell have been proposed to predict the geometric characteristics and the engineering constants of plain and satin woven composites. In the geometric model, length and inclined angle of the yarn crimp and the fiber volume fraction of woven composites have been predicted. In the elastic model, the coordinate transformation has been utilized to transform the elastic constants of the yarn crimp to those of woven composites, and the effective elastic constants have been determined from the volume averaging of the constituent materials. Good correlations between the model predictions and the experimental results of carbon/epoxy and glass/epoxy woven composites have been observed. Based on the model, the effect of various geometric parameters and materials on the three-dimensional elastic properties of woven composites can be identified.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.107-110
• /
• 2005

In this study we investigated the shear and forming behavior of chain stitched multi-axial warp knitted fabric preform, so called non-crimp fabric (NCF). The picture frame test was performed to characterize the shear behavior of NCF and also provide material properties for the numerical simulation of its deformation behavior. The forming behavior of NCF with chain stitch were investigated using hemispherical forming tools. The experimental results show that processing conditions such as blank holder force (BHF) and preform shape are crucial to determining the forming behavior of NCF. For instance, an asymmetric formed shape, which is due to the stitches introduced to NCF, turns into a symmetric one as BHF increases. Furthermore the in-plane and out-of buckling (wrinkle), the severance of which were quantified using image processing method, decreases significantly as BHF increases.

• 한국염색가공학회지
• /
• 제20권1호
• /
• pp.28-35
• /
• 2008

Texturing is the process of including a characteristic of a natural fiber in a synthetic fiber. The most common method of it the false twist texturing. Nylon textured yarn is primarily manufactured by the disk type. The major process parameters or the disk type false twist machine ratio, disk/yarn, and heater temperature. This study therefore investigated the effects of false twist texturing, especially speed and draw ratio, on the physical properties of nylon textured yarn. The increase of speed was proportional to the increase of unwinding tension, which could reduce the production efficiency by elevating the tension affecting to fiber during the process. In addition, the increase of speed was inversely proportional to the increase of crimp rigidity of nylon textured yarn. Draw ratio was proportionally increased with the increase of tenacity and the reductions of fineness and elongation, showing the influence or draw ratio to the ultimate physical properties of textured yarn.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제6권4호
• /
• pp.307-315
• /
• 2006

차량 전장품 중 와이어링 하네스에서 큰 전류가 흐르는 회로의 연결 단자가 가지는 전기적 내구 성능 및 기계적 성능을 확보하기 위하여 단자 압착부의 압축율 최적화 기법을 개발하였다. 우선 단자 제작 과정을 표준화한 후 압착부의 주요 인자인 기계적 인장강도와 내부 부식 정도에 의한 전기적 저항 중대로 화재가 발생 가능성 관점에서 접근하였다. 여러 가지 실험을 통하여 얻어진 DATA를 분석한 결과 회귀 2차 모형을 사용하여 대전류 단자 압착부의 전기적/기계적 내구 성능 최적화 구간을 설정 하였으며, 이의 과정을 제시 하였다.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.59-64
• /
• 2019

In recent years, the HP-CRTM method, which has the ability to produce carbon fiber-reinforce plastic composites at high speeds, has come into the spotlight in the automotive parts industry, which demands high productivity. Multi-axial carbon fabric, an intermediate material used in this HP-CRTM molding process, consists of layered fibers without crimp, which makes it better in terms of tensile and shear strength than the original woven fabrics. The NCF (non-crimp fabric) can form the layers of the carbon fiber, which have different longitudinal and lateral directions, and ${\pm}{\theta}$ degrees, depending on the product's properties. In this research, preforms were made with carbon fibers of ${\pm}45^{\circ}$ and $0/90^{\circ}$, which were lamination structures under seven different conditions, in order to create the optimal laminated structure for automobile reinforcement center floor tunnels. Carbon fiber composites were created using each of the seven differently laminated preforms, and polyurethane was used as the base material. The specimens were manufactured in accordance with the ASTM D3039 standards, and the effect of the NCF lamination structure on the mechanical properties was confirmed by a tensile test.

• 콘크리트학회논문집
• /
• 제19권5호
• /
• pp.569-575
• /
• 2007

철근콘크리트 구조물의 수명 연장 및 기능 보완을 위하여 콘크리트 면의 보수를 실시할 경우 일반적으로 구조적 내력을 고려하지 않는다. 특히, 표면박락 등의 보수에는 단순하게 모르타르 도포만을 이용하여 보수가 완료되므로 별도의 구조적인 보강 성능을 발휘하지 않는다. 그러나 시공성의 향상 및 균열의 억제를 위하여 철망 등의 재료를 사용할 경우 일정부분 보강의 효과를 얻을 수 있을 것으로 예상되며, 특히, 수로 구조물과 같이 교각 간에 놓여지는 구조요소의 경우 하부면의 보수를 실시할 경우 휨 저항성의 증가를 기대할 수 있다. 따라서 본 연구에서는 크리프 철망에 의한 보수를 실시하고 보수 부위 및 보수 두께에 따른 보강 성능을 확인하고자 하였다. 이를 위하여 두께 150mm, 길이 3,000mm, 너비 600mm 슬래브를 제작하고, 상부 부분 보수, 상부 전면 보수, 하부 부분 보수, 하부 전면 보수, 크림프 철망 보강 유무 등 총 8개 실험 유형을 선택하고 이에 대한 휨 보강 성능 실험을 실시하였다. 분석 결과, 크림프 철망을 보강한 실험체에서 보수 재료의 두께가 증가할수록 항복하중 및 파괴하중은 높아지는 것으로 나타났으며, 동일 조건일 경우 하부면의 보수가 휨 하중에 대한 내력을 증가시킬 수 있는 것으로 나타났다. 또한, 휨 하중을 받는 구조물 중 부분 보수만을 실시할 경우 휨 보강 성능은 기대하기 어려운 것으로 나타났다. 결론적으로 크림프 철망에 의한 보수공법 적용 시 휨 저항성의 증가가 있는 것을 알 수 있었다.