• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.257-277
• /
• 2000

New techniques for regenerating the destructed periodontal tissue have been studied for many years. Current acceptable methods of promoting periodontal regeneration are basis of removal of diseased soft tissue, root treatment, guided tissue regeneration, graft materials, and biological mediators. Platelet Rich Plasma has been reported as a biological mediator which regulates activities of wound healing progress including cell proliferation, migration, and metabolism. The purpose of this study is to evaluate the effects of using the Platelet Rich Plasma as a regeneration promoting agent for furcation involvement defect. Five adult beagle dogs were used in this experiment. The dogs were anesthetized with Ketamin HCl(0.1 ml/kg, IV)and Xylazine hydrochloride($Rompun^{(R)}$, Bayer, 0.1 ml/kg, IM) and conventional periodontal prophylaxis were performed with ultrasonic scaler and hand instruments. With intrasulcular and crestal incision, mucoperiosteal flap was elevated. Following decortication with 1/2 high speed round bur, degree II furcation defect was made on mandibular third(P3), forth(P4) and fifth(P5) premolar, and stopping was inserted. After 4 weeks, stopping was removed, and bone graft was performed. Ca-P was grafted in P3(experimental group I), Combination of Ca-P and plasma rich platelet were grafted in P4(experimental group II), and P5 was remained at control group.Systemic antibiotics(gentamicin sulfate)and anlgesics(phenyl butazone) were administrated intramuscular for 2 weeks after surgery. Irrigation with 0.1% Chlorhexidine Gluconate around operate sites was performed during the whole experimental period except one day immediate after surgery. Soft diets were fed through the whole experiment period. After 4, 8 weeks, the animals were sacrificed by perfusion technique. Tissue block was excised including the tooth and prepared for light microscope with Gomori's trichrome staining. At 4 weeks after surgery, there were rapid osteogenesis phenomenon on the defected area of the Platelet Rich Plasma plus Ca-P BBP group and early trabeculation pattern was made with new osteoid tissue produced by activated osteoblast. Bone formation was almost completed to the fornix of furcation by 8 weeks after surgery. In conclusion, Platelet Rich Plasma can promote rapid osteogenesis during healing of periodontalregeneration.

• Imaging Science in Dentistry
• /
• 제33권2호
• /
• pp.79-83
• /
• 2003

Purpose : To assess the relationship between the direction of the indicating rod of the radiographic stent for ideal prosthetic design and the actual possible path of implant fixture placement when residual ridge resorption is considered. Materials and Methods: The study materials consisted of 326 implant sites (male 214 cases and female 112 cases) from a total of 106 patients (male 65 patients and female 41 patients) who desired implant prostheses. Computed tomography of patients were taken and reformatted using ToothPix/sup (R)/ software. Bony defects, bony sclerosis, the change of the direction of indicating rod, and root proximity of the adjacent teeth were examined on the CT-derived images. Results: The rate of the irregular crestal cortex was relatively high on premolar and molar area of maxilla. Mandibular molar area showed relatively high rate of focal sclerosis on the area of implant fixture insertion. The position of the indicating rods were relatively acceptable on the molar areas of both jaws. However, the position of the indicating rods should be shifted to buccal side with lingual rotation of the apical end on maxillary anterior teeth and premolar area. Conclusion: Clinically determined rod direction and position of the indicating rod for implant placement was not always acceptable for insertion according to the reformatted CT images. The pre-operative treatment plan for implant should be determined carefully, considering the state of the alveolar bone using the reformatted CT images.

• 구강회복응용과학지
• /
• 제18권4호
• /
• pp.277-288
• /
• 2002

Seven finite element models were constructed in mandible having single screw-type implant fixture connected to the premolar superstructure, in order to evaluate how the length, diameter and platform shape of a screw-type fixture influence the stress in the supporting tissue around fixtures. Each finite element model was varied in terms of length, diameter, and platform shape of the fixture. In each model, 250N of vertical load was placed on the central pit of an occlusal plane and 250N of oblique load placed on the buccal cusp. The stress distribution in the supporting tissue and the other components was analysed using 2-dimensional finite element analysis and the maximum von Mises stress in each reference area was compared. Under lateral loading, the stress was larger at the abutment/fixture interface, and in the crestal bone, compared to the stress pattern under vertical loading. The amount of stress at the superstructure was similar regardless of the length, diameter and platform shape of a fixture. Around the longer fixture, the stress was decreased at the bone crest and subjacent cancellous bone and increased in the cancellous bone area apical to the fixture. Around the wider fixture, the stress was decreased at the abutment/fixture interface, and the bone crest and increased in the cancellous bone area apical to the fixture. Around the fixture having wider platform, less stress was produced at the abutment/fixture interface and the upper part of the cortical bone, compared to the fixture having standard platform. In conclusion, the stress distribution of the supporting tissue was affected by length, diameter, and platform shape of a fixture, and the fixture which was larger in diameter and length could reduce the stress in the supporting tissues at the bone-fixture interface and bone crest area.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.181-192
• /
• 2007

Periodontal surgery as part of the treatment of periodontal disease is mainly performed 1) to gain access to diseased areas for adequate cleaning; 2) to achieve pocket reduction or elimination; and 3) to restore the periodontal tissues lost through the disease; i.e., a new attachment formation of periodontal regeneration. To accomplish the latter, often referred to as the ultimate goal of periodontal therapy, a number of surgical procedures have been advocated throughout the years. Clinical studies have demonstrated that considerable gain of clinical attachment and bone can be achieved following guided tissue regeneration (GTR) therapy of intrabony defects. The aim of this study was to analyse the radiographic bone changes 2-year after GTR using a bone graft material and nonresorbable membrane. Patients attending the department of periodontics of Kyungpook National University Hospital were studied. Patients had clinical and radiographic evidence of intrabony defect(s), 33 sites of 30 patients aged 32 to 56 (mean age 45.6) were treated by GTR with a bone graft material and nonresorbable membrane. Baseline and 2-year follow-up radiographs were collected and evaluated for this study. Radiographic assessment includes a bone fill, bone crest change, defect resolution, and % of defect resolution. Pre- and post-treatment differences between variables (maxilla and mandible, defect depth, defect angle, bone graft materials) using the paired t-test were examined. We observed $2.86{\pm}1,87mm$ of bone fill, $065{\pm}0.79mm$ of crestal resorption, $3.49{\pm}2.11mm$ of defect resolution, and $44.42{\pm}19.51%$ of percentage of defect resolution. Mandible, deeper initial defect depth, narrower initial defect angle showed greater bone fill, defect resolution, and % of defect resolution. But no difference was observed between xenograft and allograft. Outcome of GTR as a therapy of intrabony defect was better than other therapy, but herein, good oral hygiene maintenance as a anti-infective treatment and periodic recall check of patients are essential.

• 대한치과보철학회지
• /
• 제60권1호
• /
• pp.71-79
• /
• 2022

부분 무치악 환자에 있어 심한 골소실으로 인해 치관부 수직높이가 과도해질 우려가 있는 경우에는 임플란트 식립 후 고정성 보철물로 수복시 임플란트 주변 골의 응력 증가 및 나사 풀림이 발생할 가능성이 증가할 수 있다. 이러한 경우에 milled bar 및 가철성 보철물로 수복할 수 있는데, milled bar는 단일 임플란트 간의 일차적인 스플린팅 효과와 안정성을 부여할 수 있다. 또한 milled bar 사용 시 Advanced Dental Device-Treatment Of Choice(ADD-TOC), 자석 부착장치 같은 부가적인 부착장치 사용을 통해 임플란트 피개의치의 추가 유지력을 부여할 수 있다. 본 증례의 환자는 하악 좌측 구치부 평활근육종으로 인한 절제술 후 심한 골소실 및 다수 치아를 상실한 부분 무치악 환자로 장기간의 하악 구치부 상실로 인한 대합치는 정출된 상태였다. 상악 좌측 대구치는 교정적 압하를 통해 교합평면을 회복하였고, 하악 좌측 대구치 부위는 임플란트 식립 후 milled bar에 부가적인 부착장치인 ADD-TOC, 자석 부가장치를 이용하여 임플란트 피개의치로 수복하였다. 이를 통해 장기적으로 기능적, 심미적인 만족할 만한 결과를 얻었기에 보고하는 바이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제31권3호
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.

• 대한치과교정학회지
• /
• 제25권4호
• /
• pp.403-414
• /
• 1995

본 연구는 영구치열이 완성된 원숭이 2마리를 실험 동물로 선정하여 전치간 수직 고무와 연속 호선에 의한 개교 치료 기전으로 수직피개도가 증가하였을 때, 하악 치주 조직의 조직학적 변화를 고찰하였다. 상악에 구치부 교합거상판을 장착시켜 일시적인 전치부 개교 상태를 유발하면서 상악을 고정원으로 안정화하였고, 하악에는 양측 제2대구치를 발거한 후 나머지 모든 치아에 주조금관을 제작하였다. 각 주조금관에 018inch 표준 브라켓을 납착하여 구내 고정하고, 대조동물에는 $016{\times}022$inch의 ideal archwire를, 실험동물에는 같은 크기의 MEAW(multiloop edgewise archwire)를 삽입하였다. 2주 동안 전치간 수직 고무를 적용하고 희생하였으며, 하악 치주 조직 표본을 관찰한 결과, 다음과 같은 결론을 얻었다. 1. 2주간의 실험 기간 동안 수직피개도는 대조동물에서 0.3mm, 실험동물에서 1.3mm 증가되었다. 2. 대조동물과 실험동물 모두 중절치로부터 제1소구치까지는 정출력을 받고, 제2소구치와 제1대구치는 압하력을 받은 것으로 나타났다. 3. 실험동물의 정출된 하악 절치부 치주인대는 대조군에 비하여 견인 방향에 따른 섬유 구조의 재배열이 두드러지고, 치근단과 치조정부 및 치근 측면 치조골에서 신생골 형성이 현저하였다. 4. 실험동물의 정출된 하악 절치부 치주인대의 견인력이 분포한 영역에서 과도한 치근 흡수나 초자양 변성은 관찰되지 않았다. 5. 전치부와 구치부의 치조골면에서의 골개조 현상이 대조동물에 비해서 실험동물에서 더 뚜렷하였다.

• 대한치과보철학회지
• /
• 제46권1호
• /
• pp.53-64
• /
• 2008

임플랜트 주위 변연골의 흡수는 임플랜트의 기능적 및 심미적 성공에 큰 장애가 되는 요인이다. Adell은 임플랜트에 지대주 연결 후 첫 1년간 평균적으로 1.5mm의 변연골 소실을 보이고, 이 후에는 매년 0.1mm이하의 변연골 흡수가 있었다고 하였다(Adell et al.,1981). 이러한 변연골 흡수를 막기위한 많은 노력들이 행해져 왔다. 특히 임플랜트 collar의 특징에 따라서 변연골의 흡수가 달라질 수 있다. 본 연구의 목적은 임플랜트 collar에서의 laser microtexturing(microgroove)이 변연골 흡수에 미치는 영향에 대해 알아보고자 하는 것이다. 4종류의 임플랜트 총 101개를 식립한 환자 53명에서 임플랜트 식립시부터 보철물 장착한 후 평균 6개월 후 정기 검사 시까지의 임플랜트 주위 변연골의 흡수를 측정하여 비교하였다. 생물학적 폭경을 충분히 확보한 임플랜트(ITI standard)와 생물학적 폭경이 부족한 임플랜트 (ITI esthetic plus, Silhouette IC Laser-$Lok^{TM}$, Silhouette IC)에서 변연골 흡수의 차이를 비교하였고, 임플랜트 주위 변연골의 흡수에 대한 laser를 이용한 미세나사산의(Silhouette IC Laser-$Lok^{TM}$) 영향을 알아보았다. 다음의 결과를 얻었다. 1. ITI standard와 Silhouette IC Laser-$Lok^{TM}$ 이 ITI esthetic plus 와 Silhouette IC 보다 임플랜트 주위 변연골의 흡수가 적었고 (p<0.05), ITI standard 와 Silhouette IC Laser-$Lok^{TM}$ 사이에는 변연골의 흡수가 유의차가 없었고(P>0.05), ITI esthetic plus와 Silhouette IC 사이에도 변연골의 흡수가 유의차가 없었다(P>0.05). 2. 사용된 임플랜트 전체에 대한 상하악의 비교에서는 상하악 사이에서 임플랜트 주위 변연골의 흡수는 통계학적으로 유의한 차이가 없었다(p>0.05). 3. 흡수각도에 대한 비교에서도 4종류 임플랜트 그룹 간에 통계학적으로 유의한 차이는 없었다(P>0.05). 본 연구에서 제한이 있긴 하지만, 임플랜트 디자인에서 생물학적 폭경이 부족한 경우(ITI esthetic plus, Silhouette IC)에는 생물학적 폭 경 보상을 위한 임플랜트 주위 변연골의 흡수가 있었음을 보여주고 있으나, laser를 이용한 microgroove 가 부여된 임플랜트에서는 collar의 거칠기와 laser microtexturing 등의 특징에 의해 임플랜트 주위 변연골의 흡수가 적게 일어난 것이 관찰되었다. 심미적인 요구도가 높은 전치부에서 충분한 생물학적 폭경이 확보된 임플랜트를 식립할 경우 변연골의 흡수에 따른 치은퇴축에 의해 metal collar의 노출이 우려되기에 충분한 생물학적 폭경이 부여되지 않은 임플랜트를 선정하게 되는데 이때 collar에서의 laser microtexturing은 변연골의 유지에 도움이 되었다. 이것은 조직의 단단한 부착으로 인한 안정화로 추정해 볼 수 있는데, 이에 대해서는 더 장기간의 연구와 더 많은 수의 임플랜트를 대상으로 한 연구와 조직학적인 연구도 필요할 것으로 사료된다.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권2호
• /
• pp.166-179
• /
• 2008

Excessive concentration of stress which is occurred in occlusion around the implant in case of the implant supported fixed partial denture has been known to be the main cause of the crestal bone destruction. Therefore, it is essential to evaluate the stress analysis on supporting tissue to get higher success rates of implant. The purpose of this study was to evaluate the effects of stress distribution and deformation in 3 different types of three-unit fixed partial denture sup-ported by two implants, using a three dimensional finite element analysis in a three dimensional model of a whole mandible. A mechanical model of an edentulous mandible was generated from 3D scan, assuming two implants were placed in the left premolars area. According to the position of pontic, the experiments groups were divided into three types. Type I had a pontic in the middle position between two implants, type II in the anterior posi-tion, and type III in the posterior position. A 100-N axial load was applied to sites such as the central fossa of anterior and posterior implant abutment, central fossa of pontic, the connector of pontic or the connector between two implants, the mandibular boundary conditions were modeled considering the real geometry of its four-masticatory muscular supporting system. The results obtained from this study were as follows; 1. The mandible deformed in a way that the condyles converged medially in all types under muscular actions. In comparison with types, the deformations in the type II and type III were greater by 2-2.5 times than in the type I regardless of the loading location. 2. The values of von Mises stresses in cortical and cancellous bone were relatively stable in all types, but slightly increased as the loading position was changed more posteriorly. 3. In comparison with type I, the values of von Mises stress in the implant increased by 73% in Type II and by 77% in Type III when the load was applied anterior and posterior respectively, but when the load was applied to the middle, the values were similar in all types. 4. When the load was applied to the centric fossa of pontic, the values of von Mises stress were nearly $30{\sim}35%$ higher in the type III than type I or II in the cortical and cancellous bone. Also, in the implant, the values of von Mises stress of the type II or III were $160{\sim}170%$ higher than in the type I. 5. When the load was applied to the centric fossa of implant abutment, the values of von Mises stress in the cortical and cancellous bone were relatively $20{\sim}25%$ higher in the type III than in the other types, but in the implant they were 40-45% higher in the type I or II than in the type III. According to the results of this study, musculature modeling is important to the finite element analysis for stress distribution and deformation as the muscular action causes stress concentration. And the type I model is the most stable from a view of biomechanics. Type II is also a clinically accept-able design when the implant is stiff sufficiently and mandibular deformation is considered. Considering the high values of von Mises stress in the cortical bone, type III is not thought as an useful design.

• 대한치과보철학회지
• /
• 제47권3호
• /
• pp.301-311
• /
• 2009

연구목적: 연조직 펀치를 이용한 무피판 임플란트 수술법은 임플란트를 식립할 부위에 환상형의 절개를 필요로 한다. 이에 연조직 펀치의 사용을 위한 지침을 만드는 데 도움을 주고자 성견의 하악에서 임플란트 주위 조직의 치유에 대한 연조직 펀치의 영향을 조사하는 실험이 수행되었다. 연구 재료 및 방법: 6 마리의 성견에서 하악의 양측에 무치악의 평편한 치조제를 만들었다. 3 개월 동안의 치유 기간 후, 3 mm, 4 mm, 5 mm 연조직 펀치를 사용하여 절개하고 양측에 각각 3개의 임플란트 (직경 4.0 mm)를 식립하였다. 그리고 즉시 치유지대주 (직경 4.5 mm)를 연결하였다. 그 후 치유 기간 동안 임플란트 주위 점막을 임상적, 방사선학적 그리고 조직학적 방법으로 평가하였다. 평가 요소는 치은 지수, 탐침시 출혈, 치주 탐침 깊이, 변연골 상실 그리고 임플란트 주위 조직의 수직적인 변화이다. 결과: 임플란트 식립 후 치유 기간 동안에 3 mm, 4 mm, 5 mm 연조직 펀치 군 사이에 접합 상피의 길이, 치주 탐침 깊이, 변연골 상실이 유의할 만한 차이가 관찰되었다 (P <.05). 3 mm 연조직 펀치를 사용한 경우가 4 mm 이상의 연조직 펀치를 사용한 것에 비해 상대적으로 접합 상피의 깊이는 짧았고, 치주 탐침 깊이는 얕았으며, 변연골 흡수량이 적었다. 결론: 무피판 임플란트 수술에서 연조직 펀치의 직경은 최적의 연조직 밀폐의 형성과 연조직의 치유에 있어 중요한 역할을 한다. 선택된 치유지대주보다 약 1 mm 작은 직경의 연조직 펀치를 사용하는 경우 임플란트 주변 점막과 긴밀한 접촉을 이룰 수 있고 창상 치유가 가장 양호 하다.