• 한국지반환경공학회 논문집
• /
• 제11권4호
• /
• pp.19-24
• /
• 2010

사면의 거동에 관한 종래의 해석 기법은 사면거동을 시간과 변위의 2차원 크리프로 해석하는 것이었으나, 이러한 해석 기법은 강우에 의한 응력변화를 고려 않고 시간에 따른 변위만을 고려하여, 강우 시 사면의 거동 및 붕괴를 설명하지 못한다. 또한 강우에 의한 이력현상으로 인해 파괴면내의 전단에너지가 감소한다. 크리프 해석은 응력항을, 이력현상 해석은 시간항을 무시한 해석이므로, 두 가지 해석을 결합하여, 사면의 거동을 해석한다면, 응력변화, 변위 및 시간을 모두 고려한 실제 사면의 거동해석이 됨을 알 수 있다. 그러나 응력변화에 관한 항은, 강우로 인한 실제 사면의 침투 및 배수 시, 전단응력의 변화 및 전단강도의 변화를 동시에 유발하므로, 이 두 항을 동시에 고려할 수 있는 안전계수항으로 바꾸어야 한다. 본 논문은 강우의 지반침투 및 배수로 인하여 사면의 단위중량이 변하는 과정에 대한 크리프와 이력현상을 고려할 수 있는 결합해석으로 고찰하고 이에 따른 사면붕괴에 관한 전단응력과 전단강도의 변화 및 안전계수변화를 3차원으로 나타내고자 수행한 결과이다.

• 비파괴검사학회지
• /
• 제19권2호
• /
• pp.110-117
• /
• 1999

크리프 손상을 단계적으로 받은 순수 구리 시편에 대하여 손상 진전에 따른 기공의 미시구조 변화를 관찰하고 초음파 속도와 주파수 의존 진폭 스펙트럼 및 감쇠를 측정하였다. 손상 진전에 따른 입계기공의 비등방적 성장으로 인하여 하중축에 대하여 세 방향으로 측정한 속도는 이방성 거동을 보였다. 최대 2%의 기공에 대하여 종파와 횡파는 각각 11%와 4%의 속도 감소를 보였으며, 기공량의 증가와 함께 비선형적인 감소 경향을 보였다. 진폭 스펙트럼은 기공량이 증가함에 따라 고주파수 성분이 감소하고 중심 주파수가 저주파수로 이동하였으며, 감쇠는 사용 주파수 범위에서 거의 선형적인 거동을 보였다. 기공량의 정량적 비파괴평가 파라미터로서 정규화 속도, 진폭 스펙트럼의 중심 주파수, 감쇠 기울기를 선정하였으며 기공량과의 상관관계를 제시하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.61-64
• /
• 2006

This paper presents experimental analysis of a friction-driven wheel responsible for generating wheel squeal. Squeal noise generating mechanism has been examined under the laboratory condition by the model rig. Creep characteristics and squeal noise were observed by varying relative velocity of the wheel with respect to the rail and friction coefficient. Computational radiating noise analysis was also performed based on the modal analysis and noise transfer function measurement of the object wheel.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.466-471
• /
• 2004

Efficient numerical finite element analysis of creeping concrete structures requires the use Kelvin or Maxwell chain model, which is most conveniently identified from a continuous retardation or relaxation spectrum, the spectrum in turn being determined from the given compliance or relaxation function. The method of doing that within the context of solidification theory for creep with aging was previously worked out by Bazant and Xi, but only for the case of a continuous retardation spectrum based on Kelvin chain. The present paper is motivated by the need to incorporate concrete creep into the recently published microplane model M4 for nonlinear triaxial behavior of concrete, including tensile fracturing and behavior under compression. In that context. the Maxwell chain is more effective than Kelvin chain. because of the kinematic constraint of the microplanes used in M4. Determination of the continuous relaxation spectrum for Maxwell chain. based on the solidification theory, is outlined and numerical examples are presented.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.472-477
• /
• 2003

A piezo-actuator is an important component for an E-beam lithography system. But it is very difficult to model its characteristics due to nonlinearities such as hysteresis and creep, to the input voltage. In this paper, one-axis micro stage with a piezo-actuator is modeled including the nonlinear properties. Hysteresis and creep are modeled as the first order differential equation and a time-dependent logarithmic function, respectively. The dynamic motion of the stage is also modeled as a mass-spring-damper system and the parameters are determined by utilizing the system identification technique. The simulation tool for a micro stage is constructed using the commercial software and its simulation results are compared with the experimental data.

• Journal of Biosystems Engineering
• /
• 제21권2호
• /
• pp.191-197
• /
• 1996

Allowable stacking duration of the corrugated fiberboard boxes being widely used for packaging fruits and vegetables was analyzed by the creep behavior and the cumulative load correction factor for the boxes. The stacking boxes were assumed to be stored at a nearly constant temperature and relative humidity condition. When the stacking duration was short period, the stacking height determined by two methods showed a little difference between them, but almost no difference was shown as the stacking duration was longer. Allowable stacking duration was rapidly decreased with the increase of static load applied on the stacking boxes, and allowable stacking duration of Box A was estimated the longer than that of Box B. A model of allowable stacking duration for the corrugated fiberboard box was developed as a function of the stacking load and the ambient relative humidity.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.177-185
• /
• 1999

The airfoil design optimization procedures based on the Navier-Stokes equations were developed, This procedure enables more realistic and practical transonic airfoil designs. The modified Hicks-Henne functions were used to generate the shape of airfoils. Five Hick-Henne functions were used to design upper surface of airfoil only. To enhance the ability of Hick-Henne function to generate various airfoil shape with limited number of functions, the positions of control points were adjusted through optimization procedure. The design procedure was applied to the single-point design for the drag minimization problem with lift and area constraints. The result shows the capability of the procedure to generate much realistic airfoils with very small drag-creep in the low transonic regime. This is mainly due to the viscosity effect of Navier-Stokes flow analysis. However, in the higher transonic range tile drag-creep appears. The multi-point design is shown to be an effective way to avoid the drag-creep and improve off-design performance which is very similar in the Euler design.

• The Korean Journal of Ceramics
• /
• 제5권2호
• /
• pp.104-109
• /
• 1999

Rheological properties of dense slurries over 45 volume % with different monosaccharides and disaccharides were checked in order to increase the solid content of dense slurries without sacrificing plasticity using creep testing method. Strain in creep test showed good correlations with Burger model which is expressed as an exponential function of time. Among several monosaccharides and disaccharides studied here, fructose and sucrose were most effective in making dense alumina slurry plastic than other monosaccharides and disaccharides like glucose, galactose, xyloss and maltose. In the case of dense alumina slurry with sucrose, sucrose content or additional water content enhanced to the plasticity of the slurries.

• 한국농공학회지
• /
• 제30권4호
• /
• pp.134-153
• /
• 1988

This paper was carried out to investigate the existence of a unique stress- strain behavior by obtaining some factors influencing the time dependent stress- strain behavior of clay. The results obtained from this study were summarized as follows ; 1. The relationship between stress ratro and strain in normally consolidated clay was in- dependent on pre-shear consolidation pressure. Therefore, shear strain could be expressed as a function with stress ratio. 2. The constitutive equation of shear strain on Modified Carn Clay Model coincided better with the observed value than Cam Clay Model. 3. The relationships between deviator stress and shear strain, between pore water pressure and shear strain were unified by the mean equivalent pressure. 4. The shear strain contour in norrnally consolidated clay was increased linearly through origin, but that in overconsolidated clay was not in accordance with the result of the former. 5. Because the effective stress path of normally consolidated clay was unified by the mean equivalent pressure, state boundary surface in (e,p,q) space was transformed into two dimensional surface. But it was considered to be suitable that the unified stress- strain in overconsolidated clay be expressed by a function with overconsolidation ratio. 6. The deviator for constant strain was increased linearly with increment of strain rate ($\varepsilon$) on semi-log scale, but pore water pressure was decreased. 7. The behavior of stress relaxation was transformed from linear to curvilinear with inc - rement of strain rate before stress relaxation test, and pore water pressure was increased in total range. 8. The strain of creep was increased linearly with increment of time on semi-log scale. The greater the strain rate before creep test became, the greater the increment of strain of creep became. And the pore water pressure during creep test was increased generally with increment of time on semi-log scale.

• Geomechanics and Engineering
• /
• 제8권2호
• /
• pp.187-220
• /
• 2015

Soil disturbance induced by installation of mandrel driven vertical drains decreases the in situ horizontal hydraulic conductivity of the soil in the vicinity of the drains, decelerating the consolidation rate. According to available literature, several different profiles for the hydraulic conductivity variation with the radial distance from the vertical drain, influencing the excess pore water pressure dissipation rate, have been identified. In addition, it is well known that the visco-plastic properties of the soil also influence the excess pore water pressure dissipation rate and consequently the settlement rate. In this study, a numerical solution adopting an elastic visco-plastic model with nonlinear creep function incorporated in the consolidation equations has been developed to investigate the effects of disturbed zone properties on the time dependent behaviour of soft soil deposits improved with vertical drains and preloading. The employed elastic visco-plastic model is based on the framework of the modified Cam-Clay model capturing soil creep during excess pore water pressure dissipation. Besides, nonlinear variations of creep coefficient with stress and time and permeability variations during the consolidation process are considered. The predicted results have been compared with V$\ddot{a}$sby test fill measurements. According to the results, different variations of the hydraulic conductivity profile in the disturbed zone result in varying excess pore water pressure dissipation rate and consequently varying the effective vertical stresses in the soil profile. Thus, the creep coefficient and the creep strain limit are notably influenced resulting in significant changes in the predicted settlement rate.