• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.79-91
• /
• 1993

The purpose of this study is to prepare the newer, more comfortable of urea-formaldehyde resin finished fabrics. The methods of this study are by making examinations and comparisons the relations between the thickness, fabrics counts, weight, moisture regain and crease recovery of cotton and viscose rayon fabrics caused by condition of urea-formaldehyde resin finishing and warm retaining ability and warm-cool sense. The analytic results of thermal character in state of fabrics material finished with urea-formaldehyde are as follows: 1. The warm retaining ability has no correlation with mixing ratio of resin but the increase of the warm retaining ability has correlation with the increase of concentration of urea-formaldehyde resin. 2. The result pf multiple regression analysis for effect of physical property according to the concentration of resin to the warm retaining ability revealed as below. As the weight, thickness and density increase and moisture regain decreases, the warm retaining ability increases. 3. The qmax value has no correlation with mixing ratio of resin but the increase of the qmax value has correlation with the increase of resin concentration. In the end, the effect of it promotes cool sense. 4. The result of multiple regression analysis for effect of physical property according to the concentration of resin to the qmax value revealed as below. As he weight and thickness increase, the qmax value decrease. But, as the density and crease recovery increase, the qmax value increase.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.41-49
• /
• 1997

To control free formaldehyde release from fabric finished with N-methylol compounds, resin finished cotton fabric was treated with resorcinol solution, dried and cured. Factors affecting to control formaldehyde release have been investigated. It was shown that the aftertreatment with resorcinol greatly suppressed the free formaldehyde release. Up to concentration of about 5% of resorcinol, the concentration of resorcinol effected on the control of free and evolved formaldehyde. And at high concentration of resorcinol, however, the concentration became rather insensitive to contol formaldehyde release. Addition of some salt catalysts such as ammonium chloride, zinc nitrate, sodium acetate and ammonium acetate, was effective in decreasing formaldehyde release. Considering the effect on the control of formaldehyde and crease recovery, ammonium acetate was concidered to be the best catalyst. It was observed that the optimum curing temperature for the resorcinol treatment was about 15$0^{\circ}C$, and that the curing time did not affected formaldehyde release over three minutes. Although the treatment of resorcinol had a little adverse effect on crease recovery of resin finished fabric, this effect could be negligible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.1
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.

• Textile Coloration and Finishing
• /
• v.9 no.5
• /
• pp.42-51
• /
• 1997

The purpose of this article is to investigate the effect of $O_{2}$ low temperature plasma treatment oft chitosan treatment of polyester fabrics. Moisture regain, static charge, crease resistance and reduction ratio of the treated fabric were measured. The results of this study were as follows: The add-on ratio and. the moisture regain of polyester fabrics treated with chitosan after treated by plasma(CP PET) were higher than those of polyester fabrics treated with only chitosan(C PET). The static charge of polyester fabrics decreased greatly with increasing the concentration of chitosan. A durability for laundering of CP PET was higher than those of C PET. The crease resistance of polyester fabrics decreased with ihcreasing the concentration of chitosan continuously. CP PET had higher decreasing rate and better durability than C PET. It showed that chitosan-treated polyester fabrics had over 90% reduction ratio after 10 times of laundering, and CP PET had better reduction ratio than C PET.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.67-72
• /
• 2001

Tencel fabric was treated with cellulase and softener. And then Mechanical properties were investigated. Basic characteristic values of clothing wearing were calculated. With the treatment of cellulase and softener treatment, WT, RT, LC, WC, RC of mechanical characteristics were increased, and G, 2HG, 2HG5, B, 2HB were decreased. B/W, $\sqrt[3]{B/W}$, $\sqrt{2HB/W}$, 2HB/B, W/T of Basic characteristic values of clothing wearing were decreased. WC/W, WC/T were increased, Therefore, drapability, crease resistance, pressing softness, air content were improved. In consideration of mechanical characteristics and basic characteristic values of clothing wearing depending on the softener, values of WT, WC/W, WC/T were bigger with the treatment of epoxy and snow softener than with the treatment of cation and blend softener. LC, WC, RC, B/W, $\sqrt[3]{B/W}$, $\sqrt{2HB/W}$, 2HB/B, W/T were bigger with the treatment of cation and blend softener than with the treatment of epoxy and snow softener. Thereofre, with the treatment of epoxy and snow softener, drapability, crease resistance, air content were improved. With the treatment of cation and blend softener, pressing softness were improved.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.5
• /
• pp.31-36
• /
• 2010

When corrugated board is folded at the severely low humidity condition, crack can occur along the scored (or creased) lines of linerboard. This phenomenon is called as score (or crease) crack. It is mainly resulted from the excessive concentration of stress on the outer layer of linerboard. To overcome score crack, many approaches including the installation of constant temperature and humidity system, displacement of low grade raw material by long and strong fibers, or application of water have been tried. We examined the effect of the weight fraction of top layer in two-ply sheet, freeness of top layer stock and wet pressing on strain and elastic modulus of sheet to prevent score crack. Lower freeness and higher press load increased the density and elastic modulus of sheet. Pressing load over the $50kgf/cm^2$, however, decreased the strain of sheet. The weight fraction of top layer had positive effect on strain as well as elastic modulus without increasing the density of sheet.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.4
• /
• pp.185-191
• /
• 2002

In this paper, we propose a 3D object LOD(Level of Detail) modeling system that constructs a mesh from range images and generates the mesh of various LOD using the wavelet transform. In the initial mesh generation, we use the marching cube algorithm. We modify the original algorithm to apply it to construct the mesh from multiple range images efficiently. To get the base mesh we use the decimation algorithm which simplifies a mesh with preserving the topology Finally, when reconstructing new mesh which is similar to initial mesh we calculate the wavelet coefficients by using the wavelet transform. We solve the critical problem of wavelet-based methods - the surface crease problem (1) - by using the mesh simplification as the base mesh generation method.

• The Journal of Korean Medicine
• /
• v.41 no.4
• /
• pp.72-77
• /
• 2020

Objectives: This study was carried out to concrete the concept of Hand Gworeum Skin referred in Suwen of Huangdi Neijing. Methods: The Hand Gworeum Meridian was labeled with latex in the body surface of the cadaver, subsequently dissecting a superficial fascia and muscular layer in order to observe internal structures. Results: Skin histologically encompasses a common integument and a immediately below superficial fascia, this study established the skin boundary with adjacent structures such as relative muscle, tendon as its compass. The realm of the Hand Gworeum Skin is as follows: The skin close to the nipple on the 4th intercostal space, the interceps of biceps brachii muscle, the cubital surface at ulnad of bicipital aponeurosis, the anterior surface of the forearm, between flexor carpi radialis and palmaris longus(from wrist crease to 5chon above), the palm between the 3rd and 4th metacarpals on the cross part with the palm crease, the radiod from the middle finger nail(or the end of middle finger). The realm of the Hand Gworeum Skin is situated on between Hand Taeeum Skin and Hand Soeum Skin in front of arm. Conclusion: The realm of Hand Gworeum Skin from the anatomical viewpoint seems to be the skin area outside the superficial fascia or the muscle involved in the pathway of the Hand Gworeum Meridian vessel, Collateral Meridian vessel, and Meridian muscle, being considered adjacent vessels or nerves at the same time.

• Annals of Clinical Neurophysiology
• /
• v.12 no.2
• /
• pp.55-60
• /
• 2010

Background: The aim of this study is to identify the correlation between ultrasonographic findings of median nerve and clinical scale and electrophysiologic data in carpal tunnel syndrome. Methods: Forty three patients (79 hands) with electrophysiologically confirmed carpal tunnel syndrome were evaluated. Clinical symptoms were examined by Historical-Objective (Hi-Ob) scale. Electrophysiologic data and Padua scale were used for severity of electrophysiology. In ultrasonographic study, cross sectional area and flattening ratio of median nerve were measured at distal wrist crease level (DWC), 1cm proximal to distal wrist crease level, and 1cm distal to distal wrist crease level. The correlation between Hi-Ob scale, electrophysiologic data and ultrasonography was measured with Spearman rank test. Results: The mean Hi-Ob scale was 2.4. Mean Padua scale was 4.0. In ultrasnonographic study, cross sectional area and flattening ratio were $0.112\;cm^2{\pm}0.025$ and $3.0{\pm}0.6$ at 1cm proximal to DWC level, $0.118{\pm}0.026\;cm^2$ and $2.9{\pm}0.4$ at DWC level, and $0.107{\pm}0.032\;cm^2$ and $3.0{\pm}0.4$ at 1 cm distal to DWC level. Hi-Ob scale was not correlated with cross sectional area and flattening ratio of median nerve. Hi-Ob scale was correlated with Padua scale positively (r=0.44) and correlated with amplitudes of CMAP and SNAP, negatively (r=-0.33; r=-0.30). Cross sectional area of median nerve was significantly correlated with Padua scale, amplitudes and latencies of CMAP and amplitudes of SNAP. Conclusions: Ultrasonographic findings of median nerve and electrodiagnostic data had statistically significant correlation. Consequently, ultrasonography could be an adjunctive method in diagnosis of carpal tunnel syndrome.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.1
• /
• pp.15-23
• /
• 1978

This studies have been carried out for several years to develop more better urea resin treating process on silk textiles which may be better crease resist without harming on the textile touch feeling. Specially, this paper payed attention to minimize the necessary formaldehyde content to be condensed with urea and created a new processing method which is named as Homo Metalic Urea Resin found to be better than urea resin process. The obtained results are as followings. 1. The prepared urea resin was found to be smell-less because of minimized formaldehyde content is the least than any other reports carried out before than this. 2. A new type of urea resin has been created by using uric 2incchloride and formaldehyde which is named as Homo Metalic Urea Resin. This processing method may carry both weighing process and urea resin process. 3. Crease resistance, stiffness and bulkiness were increased through such resin treats. Homo metalic urea resin process showed better results than the urea resin process. 4. Spun silk or low twisted silk have shown better crease resistance than raw silk or high twisted silk upon the both resin treats. 5. Both treat methods were found to be good economical feasibility upon the silk finishing process. 6. Tenacity and elongation of silk fibers were found to decrease some what because of grafting or weighing results. 7. Wooly silk has been also created with specific urea resin process. Such silk could be obtained by formaldehyde gas treat with urea soaken silk in a chamber, which induced to form scale on the surface of silk fibers.