• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.76-81
• /
• 2023

Journaling file systems are widely used to keep file systems in a consistent state against crash situations. As traditional journaling file systems are designed for block I/O devices like hard disks, they are not efficient for emerging byte-addressable NVM (non-volatile memory) media. In this article, we present a new in-memory journaling file system for NVM that is different from traditional journaling file systems in two respects. First, our file system journals only modified portions of metadata instead of whole blocks based on the byte-addressable I/O feature of NVM. Second, our file system bypasses the heavy software I/O stack while journaling by making use of an in-memory file system interface. Measurement studies using the IOzone benchmark show that the proposed file system performs 64.7% better than Ext4 on average.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2010

Management of driver hours of service (HOS) for commercial vehicle operators has been a continual safety challenge. One of the more critical issues to government and motor carriers is fatigue and fatigue-related accidents. To reduce truck drivers’fatigue-related accident risk in other countries, the government issued the HOS regulations. However, korea government does not have any HOS regulations. The objective of this research gives the clues that korea should have the HOS regulation to reduce truck drivers’fatigue-related accident risk. This study examines the HOS regulation over other countries and conducts relative accident risk analysis using the real data from 3 freight companies. The data set includes 231 accident involved drivers and 462 non-accident drivers. Therefore, the size of the total data set is 693 drivers. One of the most important aspects of early studies of safety and HOS was the need to characterize continuous driving by using the notion of "survival". Subsequent research used a data replication scheme and logistic regression to capture the survival effect. This study uses time-dependent logistic regression. The test of significance between parameters indicates that the first three hours are almost the same risk. In the 10th hour of driving, the risk was more than 2.2times that in the baseline first hour. In conclusion, as driving time goes on, the crash risk increases.

• Journal of Korean Society of Transportation
• /
• v.34 no.6
• /
• pp.535-547
• /
• 2016

This study aims to identify factors that affect the degree of injury severity sustained in traffic crashes on work zone of Korean expressways. To this end, decision tree method was applied to identify influential factors on injury severity and compare characteristics of those factors between work zone and non-work zone. The results from the comparison show that the risk of severity was low when traffic volume and heavy vehicle ratio are high because the factors lower the overall section speed. On the other hand, when the traffic volume and the heavy vehicle ratio are low, the section speed increased and the tendency for high injury severity was confirmed. These findings are expected to help transportation planners and engineers understand which risk factors contribute more to severe injury in the work zones such that they can effectively prepare and implement safety countermeasures.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.53-62
• /
• 2015

Time-Cost Trade-Off (TCTO) model is an important model in the construction project planning and control area. Two types of Existing TCTO model, continuous and discrete TCTO model, have been developed by researchers. However, Using only one type of model has a limitation to represent a realistic crash scenario of activities in the project. Thus, this paper presents a comprehensive TCTO model that combines a continuous and discrete model. Additional advanced features for non-linear relationship, incentive, and liquidated damage are included in the TCTO model. These features make the proposed model more applicable to the construction project. One CPM network with 6 activities is used to explain the proposed model. The model found an optimal schedule for the example to satisfy all the constraints. The results show that new model can represent more flexible crash scenario in TCTO model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.5
• /
• pp.445-454
• /
• 2020

Non-breakaway crashworthy sliding posts move rigidly with a vehicle in the early stage of vehicle impact. During this stage, a vehicle imparts its linear momentum to the post, experiencing first-stage speed loss followed by second-stage loss from the crush of the energy-absorbing pipe (EAP) installed under the guide rail. An EAP is the key element of a crashworthy sliding post and should be confined to the post foundation. This paper covers the development of an EAP for a sliding post of 507 kg, which is a sliding post type frequently used in Korea for cantilever signs. Detailed explanations of the designs for an EAP structure using LS-DYNA impact simulation are given, and the crashworthiness of the systems are confirmed through crash tests. The EAP presented in this paper can accommodate impacts from 0.9 ton-60 km/h to 1.3 ton-80 km/h, and is applicable to foundations up to 2.7 m in length.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.109-114
• /
• 2007

Skid mark and coefficient of friction are usually utilized to calculate the velocity and behavior of vehicles. For a critical case such as traffic accident reconstruction, however, the initial velocity of the car should be calculated precisely. In this study, the skid marks on dry asphalt pavement were measured, and the velocity at brake onset was precisely recovered. A passenger car with new tires and non-contact optical speedometer were set up for the tests. A new methodology to determine the more precise velocity for Non-ABS vehicle at braking onset were suggested.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.385-392
• /
• 1998

Train crashes involve complex interaction between deformable bodies in multiple collisions. The purpose of this study is to suggest the effective analytical procedure using simple model for the crashworthiness of motorized trailer of high speed train. The simple model, with very short modeling time and reduced computation time was adopted to extract the global behaviour and to perform a pre-optimization of the considered structure. Firstly, various types of crash events are investigated and the conditions for numerical simulation are defined. The simple model, using the beam and non-linear spring element, and shell element model are used to evaluated energy absorption and deformation mechanism in analyses. And aluminum is applied to real model after verification with square tube analyses. Finally, loading path and energy absorption of main components are evaluated. The analyses are aimed to ensure the crashworthiness design of high speed train.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.7-14
• /
• 2012

CFRP composite material has the superior specific strength and rigidity compared to metallic materials, and is widely adopted in the various fields. However, CFRP composite material has the weakness in hygrothermal and crash environment. Especially, moisture ingress into composite material under hygrothermal environment can change molecule arrangement and chemical properties. In addition, interface characteristics and material component properties can be degraded. A collapse experiment has been made to research the differences of absorbed energy and deformation mode between absorbed specimens of moisture and non-moisture. As a result of this study, the effect of moisture absorption and impact loads of about 30~50% reduction in strength are shown.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.403-408
• /
• 2000

The use of tailor welded blanks(TWB) in automotive applications is increasing due to the potential of weight and cost saving In this study, the front side member of passenger car is developed by typical analysis and crash simulations. According this results, energy absorption and barrier force is very important to control passenger safety and deformation shape. For that purpose, it is most effective to absorb energy more tailor welded blanks front side member than non-twb. The front side member with twb is simulated, in which reduced stamping parts, weight reduction and cost down.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.