• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1142-1148
• /
• 2006

Actually, a present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate fur improvement of traffic accident detection rate at intersection. The skid sound of traffic accident was showed the special pattern at 1[KHz])$\sim$3[KHz] bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound was showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Journal of Korean Society of Transportation
• /
• v.34 no.4
• /
• pp.354-372
• /
• 2016

This study identified factors affecting the crash severity at freeway work zones. A nice feature of this study was to take into account the characteristics of work zone traffic management in analyzing traffic safety concerns. In addition to crash records, vehicle detection systems (VDS) data and work zone historical data were used for establishing a dataset to be used for statistical analyses based on an ordered probit model. A total of six safety improvement strategies for freeway work zones, including traffic merging method, guidance information provision, speed management, warning information systems, traffic safety facility, and monitoring of effectiveness for countermeasures, were also proposed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.5
• /
• pp.9-15
• /
• 1996

A silicon microaccelerometer is designed and fabricated using silicon epitaxial layers for automotive electronic airbag applications. A cantilever structure is chosen for high sensitivity and piezoresistive detection method is adopted for circuit simplicity and low cost. An optimum design is used to find optimum microstructure sizes for maximum sensitivity subject to performance requirements and design constraints on natural frequency, damping ratio, maximum allowable stress and microfabrication limitations. The microaccelerometer is fabricated by micromachining processing steps, composed of material-selective and orientation-dependent chemical etching techniques. Fabricated prototype shows a sensitivity of 88.6$\mu\textrm{V}$/g within a resonant frequency of 1.75KHz. Estimated performance of the microaccelerometer is compared with measured one. Discrepancy between the theoretical values and the experimental values is discussed together with possible sources of the errors.

• International Journal of Computer Science & Network Security
• /
• v.24 no.1
• /
• pp.52-60
• /
• 2024

APT (Advanced Persistent Threat) attack is a dangerous, targeted attack form with clear targets. APT attack campaigns have huge consequences. Therefore, the problem of researching and developing the APT attack detection solution is very urgent and necessary nowadays. On the other hand, no matter how advanced the APT attack, it has clear processes and lifecycles. Taking advantage of this point, security experts recommend that could develop APT attack detection solutions for each of their life cycles and processes. In APT attacks, hackers often use phishing techniques to perform attacks and steal data. If this attack and phishing phase is detected, the entire APT attack campaign will be crash. Therefore, it is necessary to research and deploy technology and solutions that could detect early the APT attack when it is in the stages of attacking and stealing data. This paper proposes an APT attack detection framework based on the Network traffic analysis technique using open-source tools and deep learning models. This research focuses on analyzing Network traffic into different components, then finds ways to extract abnormal behaviors on those components, and finally uses deep learning algorithms to classify Network traffic based on the extracted abnormal behaviors. The abnormal behavior analysis process is presented in detail in section III.A of the paper. The APT attack detection method based on Network traffic is presented in section III.B of this paper. Finally, the experimental process of the proposal is performed in section IV of the paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.805-808
• /
• 2008

In this paper, it was performed the analysis on various intersection acoustic patterns for detection rate improvement of accident sound detection system : an acoustic pattern analysis on general traffic noise, an acoustic pattern analysis on engine noise, an acoustic pattern analysis on obstruct factors for accident sound detection system. There are remarkable differences between the acoustic patterns of traffic noise and accident sound, and we most consider the acoustic patterns when we compose the accident traffic detection system by acoustic because there is error range of 20[dB] according to the volume of traffic in intersection.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.60-64
• /
• 2022

In the automotive industry, the development of automobiles to meet safety requirements is becoming increasingly complex. This is because quality evaluation agencies in each country are continually strengthening new safety standards for vehicles. Among these various requirements, collision safety must be satisfied by controlling airbags, seat belts, etc., and can be defined as post-crash safety. Apart from this safety system, the Advanced Driver Assistance Systems (ADAS) use advanced detection sensors, GPS, communication, and video equipment to detect the hazard and notify driver before the collision. However, research to improve passenger safety in case of an accident by using the sensor of active safety represented by ADAS in the existing passive safety is limited to the level that utilizes the sudden braking level of the FCA (Forward Collision-avoidance Assist) system. Therefore, this study aims to develop logic that can improve passenger protection in case of an accident by using ADAS information and driving information secured before a collision. The proposed logic was constructed based on LSTM deep learning techniques and trained using crash test data.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.42-54
• /
• 2011

This study presented an algorithm to detect zigzag driving maneuver that is highly associated with vehicle crash occurrence. In general, the zigzag driving results from the driver's inattention including drowsy driving and driving while intoxicated. Therefore, the technology to detect such unsafe driving maneuver will provide us with a valuable opportunity to prevent crash in the road. The proposed detection algorithm used angular velocity data obtained from a gyro sensor. Performance evaluations of the algorithm presented promising results for the actual implementation in practice. The outcome of this study can be used as novel information contents under the ubiquitous transportation systems environment.

• Convergence Security Journal
• /
• v.19 no.1
• /
• pp.97-101
• /
• 2019

If the operating system's core file contains an Intel PT, the debugger can not only check the program state at the time of the crash, but can also reconfigure the control flow that caused the crash. We can also extend the execution trace scope to the entire system to debug kernel panics and other system hangs. The second-generation PT, the WinIPT library, includes an Intel PT driver with additional code to run process and core-specific traces through the IOCTL and registry mechanisms provided by Windows 10 (RS5). In other words, the PT trace information, which was limited access only by the first generation PT, can be executed by process and core by the IOCTL and registry mechanism provided by the operating system in the second generation PT. In this paper, we compare and describe methods for collecting, storing, decoding and detecting malicious codes of data packets in a window environment using 1/2 generation PT.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.12
• /
• pp.1671-1677
• /
• 2018

In this research, the collision detection system based on insect's visual interneuron has been designed. The lobula giant movement detector (LGMD) corresponds to the movement value that increases in direct collision process. If the collision is detected by the LGMD only, it could generate a crash warning even in a non-collision situation, resulting in a lot of false alarms. Directionally sensitive movement detectors (DSMD) are directionally sensitive algorithm based on the elementary movement detectors (EMD) in four directions (up, down, left, and right). In this paper, we propose an efficient VLSI architecture for a realtime collision detection system that is robust to the surrounding environment while improving accuracy. The proposed architecture is synthesized with Dongbu Hightech 110nm standard cell library and shows 333MHz of maximum operating frequency and requires 8400 gates with about 16.5KB of internal memories.

• Journal of the Speleological Society of Korea
• /
• no.80
• /
• pp.11-19
• /
• 2007

Most studies in the past in testing and benchmarking on Intrusion Detection System (IDS) were conducted as comparisons, rather than evaluation, on different IDSs. This paper presents the evaluation of the performance of one of the open source IDS, snort, in an inexpensive high availability system configuration. Redundancy and fault tolerance technology are used in deploying such IDS, because of the possible attacks that can make snort exhaust resources, degrade in performance and even crash. Several test data are used in such environment and yielded different results. CPU speed, Disk usage, memory utilization and other resources of the IDS host are also monitored. Test results with the proposed system configuration environment shows much better system availability and reliability, especially on security systems.