• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.88-98
• /
• 1992

Real automobiles have been utilized to study the occupant behaviors and the response of the structures in the crash environment. Since various parameters are involved in the automobile crashworthiness, a number of experiments must be conducted. The experiments have been contributed to increasing the cost due to the fact that the test is quite expensive. Therefore, computer simulation is adopted to reduce the number of experiments. A few computer programs have been developed specifically to solve the occupant responses in the crash environment. In this research, a software is used to study the occupant dynamic analysis. A modeling of occupant analysis is established for a passenger car and the results are verified through comparisons with real experiments. In the modeling, data are tuned very carefully so that simulated results such as HIC(Head Injury Criterion) and acceleration of each body may approximate to the experimental results. The compared experiment is a barrier test which is carried out by frontal impact. A feedback to the design process is suggested from the result of this research.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.85-95
• /
• 2015

PURPOSES : The objective of this study is to analyze factors affecting traffic accident severity for determining countermeasures on freeway climbing lanes. METHODS : In this study, an ordered probit model, which is a widely used discrete choice model for categorizing crash severity, was employed. RESULTS : Results suggest that factors affecting traffic accident severity on climbing lanes include speed, drowsy driving, grade of uphill 3%, gender (male offender and male victim), and cloud weather. CONCLUSIONS : Several countermeasures are proposed for improving traffic safety on freeway climbing lanes based on the analysis of crash severity. More extensive analysis with a larger data set and various modeling techniques are required for generalizing the results.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.2
• /
• pp.55-60
• /
• 2014

To verify the performance of roadside safety facilities, strength and occupant protection test are performed by evaluation criteria. Strength test use a truck and occupant protection test use a sedan. Strength perfomance is analyzed pass rate by post lateral resistance of the safety barrier. Occupant protection performance is analyzed from THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) by crash cushion test.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.1
• /
• pp.39-45
• /
• 2020

The express/intercity bus models have been developing for wheelchair users to provide the preferable long-distance travels by the Korean government research. In the previous studies, evaluation method was set up for the wheelchair users' safety and the study for wheelchair occupants' safety was performed under various crash loadings mimic to real accidents, frontal crash, side impact and rollover, etc. This study was focused on the evaluation of occupant behaviors and injuries (head and chest) during vehicle impact loading cases in order to ensure the safety of wheelchair passengers in the bus. The occupant response and belt loading data during the sled FE simulation were compared with those of the sled test. The simulation results showed overall safety tolerances of wheelchair occupants under the severe frontal deceleration, side impact loading based on the FMVSS 214 configuration and bus rollover loading.

• Journal of the Society of Disaster Information
• /
• v.17 no.3
• /
• pp.655-666
• /
• 2021

Purpose: This study is to develop a method for measuring dynamic speeding risks using vehicle trajectory big data and to demonstrate the feasibility of the devised speeding index. Method: The speed behaviors of vehicles were analysed in microscopic space and time using individual vehicle trajectories, and then the boundary condition of speeding (i.e., boundary speed) was determined from the standpoint of crash risk. A novel index for measuring the risk exposure of speeding was developed in microscopic space and time with the boundary speed. Result: A validation study was conducted with vehicle-GPS trajectory big data and ground-truth vehicle crash data. As a result of the analysis, it turned out that the index of speeding-risk exposure has a strong explanatory power (R²=0.7) for motorway traffic accidents. This directly indicates that speeding behaviors should be analysed at a microscopic spatiotemporal dimension. Conclusion: The spatial and temporal evolution of vehicle velocity is very variable. It is, hence, expected that the method presented in this study could be efficaciously employed to analyse the causal factors of traffic accidents and the crash risk exposure in microscopic space using mobility trajectory data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.1
• /
• pp.81-88
• /
• 2020

Flight data recorder is a equipment that records data required for investigation of aircraft accidents and should be developed in compliance with the ED-112A standard. Unlike general data storage device, flight data recorder must be able to recover data after an aircraft accident, requiring a housing and a memory board to protect data in extreme environments. To attain this performance, we designed a housing that can withstand the test by analyzing the physical environment of the impact, shear/tensile, penetration resistance and static crush test of the crash survival test and minimized the size and weight compared to the existing one in consideration of the installation of the aircraft in this paper. Insulation material and thermal block material were applied to endure high and low temperature fire so that the internal temperature does not rise above 150℃ even in 260℃, 10 hour environment. In addition, the memory board is designed to minimize the size and we devise a hoping programming method to prevent continuous data loss of more than 16 seconds. Through this, Crash protected memory module that satisfies ED-112A was completed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.234-241
• /
• 2002

In this study, the car crash analysis that simulates the crushing behavior of car forestructure during a frontal impact is carried out. The analysis model for front impact of a car consists of the lumped mass and the spring model. The characteristics value of masses and springs is obtained from the static analysis of a target car. The deceleration-time curve obtained from the simulation are compared with NCAP test data from the NHTSA. They show a good agreement with frontal crash test data. The deceleration-time curve of passenger compartment is classified into 3 stages; beginning stage, middle stage, and last stage. And the behavior of masses at each stage is explained. The effect of stiffness variation on deceleration of passenger compartment is resolved. The maximum loaded peak-time of torque box and dash is the main factor to control the passenger compartment's maximum deceleration.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.95-106
• /
• 2012

Driver's capability of identifying the change in freeway alignments and environments is one of important factors associated with traffic safety on freeways. In particular, driver's visibility and recognition capability are highly dependent on the altitude of the sun by sunset, sunrise, and nighttime. The purpose of this study is to identify the characteristics of geometric conditions affecting crash occurrences at sunset, sunrise, and nighttime. Poisson and negative binomial regressions were adopted to predict freeway crash frequency in this study. Freeway crash data during 2007~2010 were used for developing the crash frequency models. A set of variables representing the characteristics of geometric conditions were identified as significant ones affecting crash occurrences. The results of this study would be useful in deriving effective countermeasures for preventing traffic crashes that mainly occur at sunset, sunrise, and nighttime on freeways.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.179-187
• /
• 2014

As an Accident data recorder (ADR) is a system to record a vehicle's status and dynamics information on the before and after of accident, Traffic accident investigation agencies and parts developers have a lot of interest to analyze an accident objectively and develop automotive safety devices by using real accident data, This study is to analyze an accident objectively and scientifically on the basis of traffic accident reconstruction with the use of output data of an event data recorder. This study is conducted double lane change test six times and slalom test one time as a field driving test and simulation. Based on the vehicle speed, the longitudinal and transverse acceleration, steering angle, driving path, and other kinds of information obtained from the field driving test, this study performed a simulation with PC-Crash program of reenacting and analyzing a traffic accident. The simulation was performed twice in the acceleration-steering angle input method and in the acceleration-driving path input method. By comparing the result of the field driving test with the results of the two simulations, we drew an analysis method with the optimal path reconstruction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.41-53
• /
• 2010

Traffic safety assessment is often accomplished by analyzing the number of crashes occurring in some geographic space over certain specific time duration. In this paper, we introduce a procedure that can efficiently analyze spatial and temporal changes in traffic crashes before-and-after implementation of a certain traffic controlling measure. For the analysis, crash frequency data before-and-after closing a major highway around St. Louis in Missouri was collected through Transportation Management System(TMS) database that is maintained by Missouri Department of Transportation (MoDOT). In order to identify any spatial and temporal pattern in crashes, each crash is pinpointed on a map using the dynamic segmentation in GIS. Then, the identified pattern is statistically confirmed using an analysis of variance table. The advantage of this approach is to easily assess spatial and temporal trend of crashes that are not readily attainable otherwise. The results from this study can possibly be applied in enhancing the highway safety assessment procedure. This paper also makes several suggestions for future development of a comprehensive transportation data system in Korea which is similar to MoDOT's TMS database.