• Archives of Plastic Surgery
• /
• v.34 no.1
• /
• pp.123-127
• /
• 2007

Purpose: Rigid external distraction(RED) is a highly effective technique for correction of maxillary hypoplasia in patients with cleft or syndromic craniosynostosis. Despite many advantages of RED, it also has the problem of relapse as the conventional advancement surgery. Bicoronal approach, that is the common approach to gain access to the craniofacial skeleton, had some morbidity, such as hair loss, sensory loss, wide scar and temporal hollowing. We present our clinical experience of RED distraction with minimal invasive approach and early rigid fixation to overcome these disadvantages. Methods: A 27-year-old female patient with Crouzon's disease underwent Le Fort III osteotomy and RED device application through the minimal invasive direct skin incisions. After the latent period of 5 days, distraction was undertaken until proper convexity and advancement were obtained. During the rigid retention period, inflammation occurred on the right cheek, and proper conservative managements were done including continuous irrigation. To maintain the stability of distraction, early rigid fixation was undertaken on the osteotomy sites through another skin incisions. Preoperative and postoperative orthodontic treatments were performed. Serial photographs and cephalometric radiographs were obtained preoperatively, after distraction and 6 months after distraction. Results: The cephalometric analysis demonstrated postoperatively significant advancement of the maxilla and improvement of facial convexity. After 6-month follow-up period, the maxilla was stable in the sagittal plane and no relapse was found. Facial scars were not noticeable and other deformity and morbidity did not occur. Conclusion: This effective and stable technique will be a good alternative for the patients who need large amount of distraction and for adult patients with severe maxillary hypoplasia or syndromic craniosynostosis.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.28 no.2
• /
• pp.363-385
• /
• 1998

In orthodontics and orthognathic surgery. cephalogram has been routine practice in diagnosis and treatment evaluation of craniofacial deformity. But its inherent distortion of actual length and angles during projecting three dimensional object to two dimensional plane might cause errors in quantitative analysis of shape and size. Therefore, it is desirable that three dimensional object is diagnosed and evaluated three dimensionally and three dimensional CT image is best for three dimensional analysis. Development of clinic necessitates evaluation of result of treatment and comparison before and after surgery. It is desirable that patient that was diagnosed and planned by three dimensional computed tomography before surgery is evaluated by three dimensional computed tomography after surgery. too. But Because there is no standardized normal values in three dimension now and three dimensional Computed Tomography needs expensive equipments and because of its expenses and amount of exposure to radiation. limitations still remain to be solved in its application to routine practice. If postoperative three dimensional image is constructed by pre and postoperative lateral and postero-anterior cephalograms and preoperative three dimensional computed tomogram. pre and postoperative image will be compared and evaluated three dimensionally without three dimensional computed tomography after surgery and that will contribute to standardize normal values in three dimension. This study introduced new method that computer-simulated three dimensional image was constructed by preoperative three dimensional computed tomogram and pre and postoperative lateral and postero-anterior cephalograms. and for validation of new method. in four cases of dry skull that position of mandible was displaced and four patients of orthognathic surgery. computer-simulated three dimensional image and actual postoperative three dimensional image were compared. The results were as follows. 1. In four cases of dry skull that position of mandible was displaced. range of displacement between computer-simulated three dimensional images and actual postoperative three dimensional images in co-ordinates values was from -1.8 mm to 1.8 mm and 94％ in displacement of all co-ordinates values was from -1.0 mm to 1.0 mm and no significant difference between computer-simulated three dimensional images and actual postoperative three dimensional images was noticed(p>0.05). 2. In four cases of orthognathic surgery patients, range of displacement between computer­simulated three dimensional images and actual postoperative three dimensional images in coordinates values was from -6.7 mm to 7.7 mm and 90％ in displacement of all co-ordinates values was from -4.0 to 4.0 mm and no significant difference between computer-simulated three dimensional images and actual postoperative three dimensional images was noticed(p>0.05). Conclusively. computer-simulated three dimensional image was constructed by preoperative three dimensional computed tomogram and pre and postoperative lateral and postero-anterior cephalograms. Therefore. potentiality that can construct postoperative three dimensional image without three dimensional computed tomography after surgery was presented.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.10 no.1
• /
• pp.22-25
• /
• 2014

Fibrous dysplasia(FD) is a benign fibro-ossifying disease in which fibrous tissue replaces normal bone and marrow. Craniofacial bones, including the maxilla and mandible, are commonly involved. A 7 year-old girl visited the clinic with a chief complaint of gingival swelling around the lower left primary molar. Mild bulging of the lower left periodontal tissue was observed. Not only the mandible, but also the maxilla, zygoma, sphenoid, and temporal bones were affected by FD. Permanent tooth germs were involved in the lesions and facial asymmetry was caused by lower left bone expansion. She was scheduled for a follow-up visit at the department of pediatric dentistry and oromaxillofacial surgery.

• Archives of Craniofacial Surgery
• /
• v.22 no.1
• /
• pp.1-10
• /
• 2021

Botulinum toxin type A (BoNT-A), onabotulinumtoxinA (Botox) was approved by the United States Food and Drug Administration for temporary improvement of glabellar lines in patients 65 years and younger in 2002, and has also been used widely for aesthetic purposes such as hyperhidrosis, body shape contouring, and other noninvasive facial procedures. BoNT-A inhibits presynaptic exocytosis of acetylcholine (ACh)-containing vesicles into the neuromuscular junction at cholinergic nerve endings of the peripheral nervous system, thereby paralyzing skeletal muscles. ACh is the most broadly used neurotransmitter in the somatic nervous system, preganglionic and postganglionic fibers of parasympathetic nerves, and preganglionic fibers or postganglionic sudomotor nerves of sympathetic nerves. The scientific basis for using BoNT-A in various cosmetic procedures is that its function goes beyond the dual role of muscle paralysis and neuromodulation by inhibiting the secretion of ACh. Although the major target organs for aesthetic procedures are facial expression muscles, skeletal body muscles, salivary glands, and sweat glands, which are innervated by the somatic or autonomic nerves of the peripheral cholinergic nerve system, few studies have attempted to directly explain the anatomy of the areas targeted for injection by addressing the neural physiology and rationale for specific aesthetic applications of BoNT-A therapy. In this article, we classify the various cosmetic uses of BoNT-A according to the relevant component of the peripheral nervous system, and describe scientific theories regarding the anatomy and physiology of the cholinergic nervous system. We also review critical physiological factors and conditions influencing the efficacy of BoNT-A for the rational aesthetic use of BoNT-A. We hope that this comprehensive review helps promote management policies to support long-term, safe, successful practice. Furthermore, based on this, we look forward to developing and expanding new advanced indications for the aesthetic use of BoNT-A in the future.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.1
• /
• pp.34-39
• /
• 2021

Objectives: The purpose of the study was to assess the occurrence, location, and dimensions of the intraosseous vascular canal in the lateral wall of the maxillary antrum using cone-beam computed tomography (CBCT). Materials and Methods: In this retrospective study, we examined 400 CBCT scans from our archive of patients who had earlier reported to a dental teaching hospital in the United Arab Emirates. The prevalence, location, and dimensions of the lateral antral intraosseous canal (LAIC) in the maxillary antrum were evaluated by 2 examiners using standardised methods. A third examiner was consulted in cases of disagreement. Results: The prevalence of LAIC was 62.3% (249 maxillary antra) among the study population. The mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC in the posterior maxillary region was 19.83±3.12 mm. There was a significant difference (P=0.05) between the maxillary molar and premolar regions in mean distance from the most inferior point of the alveolar bone and the inferior border of the LAIC. There was no statistically significant difference in mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC between dentulous and edentulous areas (P=0.1). The G3-intrasinusal type canal less than 1mm in diameter was the most common type of LAIC. Conclusion: This study established the approximate location of the LAIC in a United Arab Emirates cohort, which will assist the oral surgeon in selecting the appropriate site for sinus lift procedures with reduced risk of surgical hemorrhage.

• Archives of Craniofacial Surgery
• /
• v.24 no.5
• /
• pp.211-217
• /
• 2023

Background: Oral cavity cancers, the second most common type in India, are responsible for 10% of the overall cancer burden. With a recurrence rate of 30% to 40% and a 5-year survival rate of 50%, these malignancies account for substantial morbidity and mortality. Despite advances in treatment modalities, survival rates following treatment completion have not improved significantly. The present study aimed to establish specific epidemiological and pathological factors responsible for recurrence after treatment completion in buccal mucosa cancers. Methods: A retrospective analysis of the data of 116 patients treated for biopsy-proven cancers of the buccal mucosa was undertaken 1 year after treatment completion. Factors such as age, sex, education, lymphovascular invasion, extranodal extension (ENE), perineural invasion, depth of invasion, and pathological margin status were compared between patients who presented with recurrence and those who did not. Statistical significance was set at p< 0.05. Results: Of the 116 patients, 40 (34.5%) developed a recurrent disease within 1 year. The mean age of the study population was 43.3 years, and males constituted 91.4% of the included patients. Ipsilateral buccal mucosa was the commonest site of disease recurrence. Neck node metastasis, ENE, and margins of resection < 5 mm were significantly related to the recurrence of disease. However, surprisingly, lymphovascular invasion, perineural invasion, and depth of invasion > 10 mm did not show statistically significant associations. Conclusion: Neck node metastasis, ENE, and margins of resection < 5 mm were the histopathological factors associated with recurrence in cancers of the buccal mucosa.

• Archives of Craniofacial Surgery
• /
• v.25 no.3
• /
• pp.123-132
• /
• 2024

Background: The introduction of presurgical nasoalveolar molding represented a significant departure from traditional molding methods. Developed by Grayson and colleagues in 1993, this technique combines an intraoral molding device with a nasal molding stent. This study aimed to compare the Grayson nasoalveolar molding appliance versus DynaCleft appliance as two methods of presurgical nasoalveolar molding. Methods: A single-blinded, randomized, parallel-arm clinical trial was conducted. Sixteen infants with complete unilateral cleft lip and palate were enrolled and divided into two groups of eight. Group 1 was treated with a modified Grayson nasoalveolar molding appliance that included a nasal stent, while group 2 was treated with DynaCleft elastic adhesive tape and an external nasal elevator. Standardized digital photographs of each infant were taken at baseline and post-treatment using a professional camera. Nine extraoral anthropometric measurements were obtained from each image using image measurement software. Results: The modified Grayson nasoalveolar appliance demonstrated a more significant improvement compared to DynaCleft in terms of alar length projection (on both sides), columella angle, and nasal tip projection. Symmetry ratios also showed enhancement, with significant improvements observed in nasal width, nasal basal width, and alar length projection (p< 0.05). Conclusion: Both the modified Grayson nasoalveolar appliance and DynaCleft appear to be effective presurgical infant orthopedics treatment options, demonstrating improvements in nasolabial aesthetics. The modified Grayson appliance, equipped with a nasal stent, improved nasal symmetry more effectively than DynaCleft, resulting in a straighter columella and a more medially positioned nasal tip.

• The korean journal of orthodontics
• /
• v.33 no.5 s.100
• /
• pp.391-398
• /
• 2003

Distraction osteogenesis is a well-estabilished procedure of membraneous bone formation and has been used to correct craniofacial deformities in dentofacial orthopedic-surgery area for decades. In this articale, distraction osteogenesis is used for treatment of facial asymmetry. The patient underwent procedures to lengthen the mandibular ramus and body. After distraction, orthodontic treatment was done for ooclusal settling.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.3
• /
• pp.315-321
• /
• 2017

The endoscopic endonasal approach (EEA) has been popularized in adults and has been applied to an expanding range of surgical modules and indications in this population. However, its clinical application in pediatric neurosurgery has been impeded by the differences in anatomical features and the relatively low incidence of diseases to which it is applicable. In this review article, we mainly discuss the surgical indications, feasibility, and complications of EEA for suprasellar lesions in children based on a review of the literature, focusing especially on the age-related anatomical features of the nasal cavity, various pathologic entities, and the impact of EEA on long-term craniofacial growth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.31 no.6
• /
• pp.526-531
• /
• 2005

Distraction osteogenesis is a technique of bone lengthening by gradual movement and subsequent remodeling. Distraction forces applied to bone also create tension in the surrounding soft tissues, distraction histiogenesis. Distraction osteogenesis is used to correct facial asymmetry, such as patients with hemifacial microsomia, maxillary or mandibular retrusion, cleft lip & palate, alveolar defect and craniofacial deficiency. Hemifacial microsomia is characterized by unilateral facial hypoplasia, often with unilateral shortening of the mandible and subsequent malocclusion. This report describes two cases of hemifacial microsomia(type IIB). In these two cases, distraction osteogenesis was used to correct a facial asymmetry. Two patients underwent unilateral mandibular distraction osteogenesis of ascending ramus of the mandible with extraoral devices. Successful distraction osteogenesis was achieved in the patients with hemifacial microsomia.