• 대한치과교정학회지
• /
• 제47권4호
• /
• pp.248-255
• /
• 2017

Objective: The purpose of this study was to investigate whether the craniofacial patterns of Korean children with snoring and adenotonsillar hypertrophy (ATH) could be categorized into characteristic clusters according to age. Methods: We enrolled 236 children with snoring and ATH (age range, 5-12 years) in this study. They were subdivided into four age groups: 5-6, 7-8, 9-10, and 11-12 years. Based on cephalometric analysis, the sagittal and vertical skeletal patterns of each individual were divided into Class I, II, and III, as well as the normodivergent, hypodivergent, and hyperdivergent patterns, respectively. Cluster analysis was performed using cephalometric principal components in addition to the age factor. Results: Three heterogeneous clusters of craniofacial patterns were obtained in relation to age: cluster 1 (41.9%) included patients aged 5-8 years with a skeletal Class I or mild Class II and hyperdivergent pattern; cluster 2 (45.3%) included patients aged 9-12 years with a Class II and hyperdivergent pattern; and cluster 3 (12.8%) included patients aged 7-8 years with a Class III and hyperdivergent pattern. Conclusions: This study found that the craniofacial patterns of Korean children with snoring and ATH could be categorized into three characteristic clusters according to age groups. Although no significantly dominant sagittal skeletal discrepancy was observed, hyperdivergent vertical discrepancy was consistently evident in all clusters.

• 대한두개안면성형외과학회지
• /
• 제18권1호
• /
• pp.5-8
• /
• 2017

Among the classification of maxillary fracture, the Le Fort classification is the best-known categorization. Le Fort (1901) completed experiments that determined the maxilla areas of structural weakness which he designated as the "lines of weakness". According to these results, there are three basic fracture line patterns (transverse, pyramidal and craniofacial disjunction). A transverse fracture is a Le Fort I fracture that is above the level of the apices of the maxillary teeth section, including the entire alveolar process of the maxilla, vault of the palate and inferior ends of the pterygoid processes in a single block from the upper craniofacial skeleton. Le Fort fractures result in both a cosmetic and a functional deficit if treated inappropriately. In this article, authors review the management of a Le Fort I fracture with a case-based discussion.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.29.1-29.11
• /
• 2018

Background: For proper recovery from craniofacial fracture, it is necessary to establish guidelines based on trends. This study aimed to analyze the patterns and causes of craniofacial fractures. Methods: This retrospective study analyzed patients who underwent surgery for craniofacial fractures between 2010 and 2017 at a single center. Several parameters, including time of injury, region and cause of fracture, alcohol intoxication, time from injury to surgery, hospitalization period, and postoperative complications, were evaluated. Results: This study analyzed 2708 fracture lesions of 2076 patients, among whom males aged 10 to 39 years were the most numerous. The number of patients was significantly higher in the middle of a month. The most common fractures were a nasal bone fracture. The most common causes of fracture were ground accidents and personal assault, which tended to frequently cause more nasal bone fracture than other fractures. Traffic accidents and high falls tended to cause zygomatic arch and maxillary wall fractures more frequently. Postoperative complications-observed in 126 patients-had a significant relationship with the end of a month, mandible or panfacial fracture, and traffic accidents. Conclusions: The present findings on long-term craniofacial fracture trends should be considered by clinicians dealing with fractures and could be useful for policy decisions.

• 대한치과교정학회지
• /
• 제39권3호
• /
• pp.136-145
• /
• 2009

상기도 공간은 3차원 입체 구조물로서 두부규격방사선사진 등으로 분석하기에는 평가의 한계가 존재하였다. 본 연구는 최근 방사선 피폭량 등의 감소로 그 활용도가 높아진 cone beam CT (CBCT)를 이용하여 안면골격형태에 따른 상기도 공간의 면적, 전후방 폭경 및 측방 폭경을 측정하고 그 관련성을 알아보았다. 102명을 대상으로 CBCT (VCT, Vatech, Seoul, Korea)를 촬영하였으며, FH plane에 평행하면서 aa point (the most anterior point on the anterior arch of atlas), $CV_{2ia}$, $CV_{3ia}$ point (most infero-anterior point on the body of the second & third cervical vertebra)를 지나는 평면을 기준으로 설정하였다. 각 항목의 계측치는 one-way ANOVA를 이용하여 통계처리하고 Duncan test로 사후검정하였다. 연구 결과, 안면 골격형태에 따른 측방 폭경에는 유의한 차이가 없었다. Group 2 (Class II) 집단은 aa plane, $CV_2$ plane, $CV_3$ plane에 의해 형성된 상기도 공간의 단면적이 좁았으며, 전후방 폭경도 Group 3 (Class III)에 비해 유의성 있게 좁았다. 수직 안면골격형태와 정상 안면골격 형태간의 유의성 있는 차이는 없었으나, aa plane에서 형성된 상기도 공간의 전후방 폭경은 Group 1V (Class I vertical)가 Group 1N (Class I normal)에 비해 유의성 있게 좁은 것으로 나타났다 (p < 0.05).

• 대한치과교정학회지
• /
• 제51권6호
• /
• pp.387-396
• /
• 2021

Objective: To identify optimal areas for the insertion of extra-alveolar miniscrews into the infrazygomatic crest (IZC) and mandibular buccal shelf (MBS), using cone beam computed tomography (CBCT) imaging in patients with different craniofacial patterns. Methods: CBCT reconstructions of untreated individuals were used to evaluate the IZC and MBS areas. The participants were divided into three groups, based on the craniofacial pattern, namely, brachyfacial (n = 15; mean age, 23.3 years), mesofacial (n = 15; mean age, 19.24 years), and dolichofacial (n = 15; mean age, 17.79 years). In the IZC, the evaluated areas were at 11, 13, and 15 mm above the buccal cusp tips of the right and left first molars. In the MBS, the evaluated areas were at the projections of the first molars' distal roots and second molars' mesial and distal roots, at a 4- and 8-mm distance from the cementoenamel junction. Intergroup comparisons were performed with analysis of variance and the Tukey test. Results: There was no statistically significant difference in the IZC bone thickness among the groups. For MBS bone availability, some comparisons revealed no difference; meanwhile, other comparisons revealed increased MBS bone thickness in the brachyfacial (first molars distal roots) and dolichofacial (second molars mesial and distal roots) patterns. Conclusions: There was no significant difference in the IZC bone thickness among the groups. The facial skeletal pattern may affect the availability of ideal bone thickness for the insertion of extra-alveolar miniscrews in the MBS region; however, this variability is unlikely to be clinically meaningful.

• 대한두개안면성형외과학회지
• /
• 제25권2호
• /
• pp.77-84
• /
• 2024

Background: The facial artery is an important blood vessel responsible for supplying the anterior face. Understanding the branching patterns of the facial artery plays a crucial role in various medical specialties such as plastic surgery, dermatology, and oncology. This knowledge contributes to improving the success rate of facial reconstruction and aesthetic procedures. However, debate continues regarding the classification of facial artery branching patterns in the existing literature. Methods: We conducted a comprehensive anatomical study, in which we dissected 102 facial arteries from 52 embalmed and formaldehyde-fixed Vietnamese cadavers at the Anatomy Department, University of Medicine and Pharmacy, Ho Chi Minh City, Vietnam. Results: Our investigation revealed eight distinct termination points and identified 35 combinations of branching patterns, including seven arterial branching patterns. These termination points included the inferior labial artery, superior labial artery, inferior alar artery, lateral nasal artery, angular artery typical, angular artery running along the lower border of the orbicularis oculi muscle, forehead branch, duplex, and short course (hypoplastic). Notably, the branching patterns of the facial artery displayed marked asymmetry between the left and right sides within the same cadaver. Conclusion: The considerable variation observed in the branching pattern and termination points of the facial artery makes it challenging to establish a definitive classification system for this vessel. Therefore, it is imperative to develop an anatomical map summarizing the major measurements and geometric features of the facial artery. Surgeons and medical professionals involved in facial surgery and procedures must consider the detailed anatomy and relative positioning of the facial artery to minimize the risk of unexpected complications.

• 대한두개안면성형외과학회지
• /
• 제20권5호
• /
• pp.297-303
• /
• 2019

Background: Absorbable plates are widely used in open reduction and internal fixation surgeries for facial bone fractures. Absorbable plates are made of polyglycolic acid (PGA), polylactic acid (PLA), polydioxane (PDS), or various combinations of these polymers. The degradation patterns of absorbable plates made from different polymers and clinical courses of patients treated with such plates have not been fully identified. This study aimed to confirm the clinical courses of facial bone fracture patients using absorbable plates and compare the degradation patterns of the plates. Methods: A retrospective chart review was conducted for 47 cases in 46 patients who underwent open reduction and internal fixation surgery using absorbable plates to repair facial bone fractures. All surgeries used either PLA/PGA composite-based or poly-L-lactic acid (PLLA)/hydroxyapatite (HA) composite-based absorbable plates and screws. Clinical courses were confirmed and comparisons were conducted based on direct observation. Results: There were no naturally occurring foreign body reactions. Post-traumatic inflammatory responses occurred in eight patients (nine cases), in which six recovered naturally with conservative treatment. The absorbable plates were removed from two patients. PLA/PGA compositebased absorbable plates degraded into fragments with non-uniform, sharp surfaces whereas PLLA/HA composite-based absorbable plates degraded into a soft powder. Conclusion: PLA/PGA composite-based and PLLA/HA composite-based absorbable plates showed no naturally occurring foreign body reactions and showed different degradation patterns. The absorbable plate used for facial bone fracture surgery needs to be selected in consideration of its degradation patterns.

• 대한치과교정학회지
• /
• 제51권2호
• /
• pp.126-134
• /
• 2021

Objective: This study aimed to evaluate the following null hypothesis: there are no differences in the morphology of the temporomandibular joint (TMJ) structures in relation to vertical and sagittal cephalometric patterns. Methods: This retrospective study was performed with 131 participants showing no TMJ symptoms. The participants were divided into Class I, II, and III groups on the basis of their sagittal cephalometric relationships and into hyperdivergent, normodivergent, and hypodivergent groups on the basis of their vertical cephalometric relationships. The following measurements were performed using cone-beam computed tomography images and compared among the groups: condylar volume, condylar size (width, length, and height), fossa size (length and height), and condyle-to-fossa joint spaces at the anterior, superior, and posterior condylar poles. Results: The null hypothesis was rejected. The Class III group showed larger values for condylar width, condylar height, and fossa height than the Class II group (p < 0.05). Condylar volume and superior joint space in the hyperdivergent group were significantly smaller than those in the other two vertical groups (p < 0.001), whereas fossa length and height were significantly larger in the hyperdivergent group than in the other groups (p < 0.01). The hypodivergent group showed a greater condylar width than the hyperdivergent group (p < 0.01). The sagittal and vertical cephalometric patterns showed statistically significant interactions for fossa length and height. Conclusions: TMJ morphology differed across diverse skeletal cephalometric patterns. The fossa length and height were affected by the interactions of the vertical and sagittal skeletal patterns.

• 대한소아치과학회지
• /
• 제26권1호
• /
• pp.185-199
• /
• 1999

The purpose of the present study was to investigate craniofacial patterns in Korean male and female adults, and to compare morphologic differences between different facial types. In order to get configurational groupings, standardized lateral and P-A cephalograms of 174 Korean adults were measured and analyzed with seven angular, nineteen linear, four ratio, and two index measurements. Ward's minimum variance cluster analysis was employed to divide the sample into groups having similar craniofacial morphology, and thereafter, inductive statistics(t-test) was used to characterize morphologic differences of the divided groups. And also, Pearson correlation coefficients were calculated to assess correlation between the cranial dimensions and upper/lower anterior facial height(UAFH, LAFH) in each facial types for both male and female The results were as follows; 1. There existed sexual dimorphism in most of variables except SN-FH angle, palatal plane angle, facial axis angle, facial index, lower anterior facial height ratio and upper facial height ratio. 2. A brachycephalic headform ($0.84{\pm}0.05$) with leptoprosopic facial form ($0.92{\pm}0.05$) was appeared in male, and a mesocephalic headform ($0.86{\pm}0.06$) with leptoprosopic facial form ($0.92{\pm}0.04$) was exhibited in female. 3. Facial types in both male and female subjects were divided into two groups, Group A (mesoprosopic facial type) and Group B (leptoprosopic facial type). The morphologic differences between Group A and Group B were as follows: a. Cranial measurements including index, angular and linear measurements were not found to be different between Group A and Group B in both sexes. b. Increased UAFH, LAFH, and upper/lower anterior dental heights were exhibited in Group Bs of both male and female. c. In both male and female, ramus height and mandible length showed no difference between Group A and Group B. However, genial angle was found to be larger in Group B than Group A. Therefore, the morphologic differences between two groups in male and female were closely related to less favorable anatomic morphology of the mandible. 4. LAFH and UAFH showed no relationships with cranial dimensions in male and female.

• 대한치과교정학회지
• /
• 제9권1호
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.