• 한국컴퓨터정보학회논문지
• /
• 제20권1호
• /
• pp.237-246
• /
• 2015

본 논문에서는 컨테이너터미널에서 탠덤 리프트 안벽크레인과 고생산성 컨테이너 이송차량 Alternative ship-to-yard vehicles를 고려한 시뮬레이션을 활용하여 컨테이너터미널의 생산성 향상 모델을 제안한다. 이 방법의 특징은 탠덤 리프트 안벽크레인과 고생산성 컨테이너 이송차량의 데이터를 도출하고, 회귀분석 함으로써 탠덤 리프트 안벽크레인의 생산성 모델을 추정한다. 탠덤 리프트 안벽크레인은 한 사이클 당 20ft 컨테이너 4개, 40ft 컨테이너 2개를 동시에 취급함으로서 기존의 싱글 안벽크레인보다 이론상 약 2배의 컨테이너 생산성을 증가시키는 장비이고 Alternative ship-to-yard vehicles는 기존의 야드 트랙터보다 더 많은 최대 4TEU의 컨테이너를 운반시킬 수 있는 장비이다. 본 논문에서는 신기술 안벽장비인 탠덤 리프트 안벽크레인과 신기술 이송장비인 Alternative ship-to-yard vehicles를 적용한 시뮬레이션을 통하여 생산성에 관한 데이터를 도출하고 통계 기법인 회귀분석을 통하여 컨테이너 터미널의 생산성의 추정모델을 구해보고자 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.433-437
• /
• 2004

A provision crane is generally installed on the upper deck to the rear of the accommodation of the ship in order to load and unload engine part or something heavy. There are two types of provision cranes: one is jib-type and the other is monorail-type. So the natural frequency of the jib-type crane equipment is low, therefore, there are some possibility of resonance between crane structure and the main excitation sources of the ship in normal operating range. This study describe a vibration reduction technique for provision crane by applying a proper countermeasure through finite element analysis and modal test. In order to find out weak point in design of provision crane, a sensitive analysis has been performed.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 춘계학술대회 및 창립 30주년 심포지엄(논문집)
• /
• pp.339-344
• /
• 2006

컨테이너 터미널의 생산성의 주요 지표로서 선박작업 생산성이 강조되고 있으며, 이는 갠트리 크레인의 작업에 크게 의존되고 있다. 갠트리 크레인의 작업시간에 발생되는 고장시간 및 고장수리시간에 의해 크레인의 본선작업 가동율이 결정되며, 이로서 체선시간이 좌우되고 있다. 본 연구에서는 갠트리 크레인의 예방보전 주기를 새롭게 설정함에 의하여 크레인의 고장을 감소시키며, 이로서 선박작업 생산성에 미치는 영향을 지표로서 제시하고자 한다.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.165-170
• /
• 2011

In this paper, wind force coefficient by wind tunnel experiment is obtained to compute the accurate wind force of the gantry crane model to be used for mobile harbor ship. The first crane model was tested under 20, 30, 40, 52m/s, partially 58m/s and the wind force coefficient is about 2.0 which is very close to the suggested theoretical value. The other is the more reliable crane model and tested under 20, 30, 40m/s also giving the similar realistic wind force coefficient. Also structural analysis of crane model was performed giving the reliable stress level. Since the rolling effect is important for mobile harbor ship, the safety of the crane on the ship needs to be guaranteed. For this, using the computed reaction forces, a tie-down design is suggested which connects the crane and ship to resist the turnover motion of the crane.

• 제어로봇시스템학회논문지
• /
• 제16권8호
• /
• pp.727-734
• /
• 2010

This paper deals with an anti-sway control for a ship-mounted container crane which is disturbed by the wave-induced motions of the ship. We derive a simple dynamics of the ship-mounted container crane with an active anti-sway control system and transform it into a dynamic function for a horizontal variable on the absolute coordinate. Then we propose an control method to reduce pendulation of the spreader and compare its performance with well-known feedback linearization control in computer simulation.

• 한국해양공학회지
• /
• 제17권3호
• /
• pp.33-38
• /
• 2003

This study focuses on an analytical approach to calculate crane-lifting forces for a sunken ship, with consideration to elongation of crane ropes. The method takes into account the relation of lifting forces acting in wire rope slings to the inclination of the ship's hull, including the effect of lug positions. For lifting analysis, the Euler angles are defined to represent the inclination of a sunken ship in developing the static force and moment equations. An additional compatibility condition is introduced in order to solve an indeterminate lifting analysis problem with 4 cranes. A set of lifting forces along the 4 crane ropes is calculated. A 3-dimensional example of the G/T 1500 oil tanker is analyzed. The results show that the information obtained by the method could be useful to engineers when conducting salvage work.

• 한국기계연구소 소보
• /
• 통권16호
• /
• pp.127-136
• /
• 1986

Recently deck crane of multi purpose cargo vessel (MPCV) is designed to posi¬tion in side instead of in the center line of the upper deck with a view to reduce the transportation cost and shipbuilding cost by shortening the length of ship. In this paper, the crane post was at first designed according to the crane maker’s specification and parent ship and the structure is analysed with Finite Ele¬ment Method. Through the careful reviews on the result of analysis, the final design of crane post was modified. The crane post is designed as a cylindrical in upper part and hexagonal in lower part instead of cylindrical on the whole as before. The connecting part of crane post is designed with the form of mixture of the cylinderical and hexagonal. Since the center of cylindrical and hexagonal section are not on the same line, it is expected to have the stress concentration. So, in order to attenuate the concentrated stress on the connecting part, the upper and lower parts was stiffened by inserting plate to enlarge the area of welding. The structure of deck part includes the tank side floor which is depend on the lower structure of the crane post that would support the force of the crane post by placing with 1.5 frame interval of the vertical plate.

• 한국항만경제학회지
• /
• 제18권1호
• /
• pp.27-41
• /
• 2002

This paper deals with the development of a simulation model for the container terminal, which consists of 3 berths, 8 container cranes, and 16 yard blocks with each yard crane and 90 yard trucks in order to evaluate the various operational rules. The proposed operational rules are 3 ship-dispatching rules, 3 berth allocation rules, 2 crane allocation rules, 2 yard allocation rules, and 2 yard truck allocation rules. These rules are simulated using 4 performance measures, such as ship time in the terminal, ship time in the port, the number of ships processed, and the number of containers handled. The simulation result is as follows: 1) there is no difference among 3 ship-dispatching rules, 2) berth allocation rules depend on performance measures, 3) dynamic crane allocation is better than fixed policy, 4) pooling yard allocation is better than short distance yard allocation rules, and 5) fixed yard truck allocation by berth is a little better than pooling policy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.714-719
• /
• 2000

In this paper, an application program is made to simulate the behavior of a ship block under various crane works and to generate data of lu9 reactions and wire tensions. The program is based on a CAD program, Pro/ENGINEER. A ship is composed of more than 100 ship blocks. In order to lift, move, turn, or put a ship block at a convenient location fur assembling, workers in a shipyard use cranes, wires, and lugs temporarily attached to the block. In the procedure of lifting and turning a ship block with a crane, it is important to find suitable lug points and wires to do the handling efficiently and prevent accidents. Evaluation of forces in lugs and wires is necessary, but the problem is rather complex due to nonlinearity and nonuniqueness. In the present development, the nonlinear system of equations for quasi-static equilibriums is derived and a Newton type solution method is adopted to solve the system. The importance of initial estimates to the solution is illustrated and two approaches are utilized and compared. With the program developed, users can assign lug points on the CAD model by mouse and choose various linking devices at each crane point. Users can try to simulate the motion for any prescribed conditions, compare the motion of the block and the reactions and choose appropriate lug points and the type of wires and lugs.

• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.1-5
• /
• 2012

Recently, with increasing container ships' volume continuously, the conceptual design "Smart Harbor" of newly logistics processing system has been suggested. It is necessary to estimate resistance and horsepower for the selection of an appropriate propulsor at the initial design stage of Smart Harbor. In this study, CFD and the circulating water channel of the University of Ulsan are employed for estimating the resistance of the Smart Harbor Crane Ship with 1/100 scaled model. Two turbulent models are used. One is realizable k-${\varepsilon}$and the other is Reynolds stress turbulence model. In addition, the effects of the change in y+ and the number of meshes are considered during analysing.