• Title/Summary/Keyword: Crack propagation

Search Result 1,635, Processing Time 0.027 seconds

Effect of Implant Types and Bone Resorption on the Fatigue Life and Fracture Characteristics of Dental Implants (임플란트 형태와 골흡수가 임플란트 피로 수명 및 파절 특성에 미치는 효과에 관한 연구)

  • Won, Ho-Yeon;Choi, Yu-Sung;Cho, In-Ho
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.26 no.2
    • /
    • pp.121-143
    • /
    • 2010
  • To investigate the effect of implant types and bone resorption on the fracture characteristics. 4 types of Osstem$^{(R)}$Implant were chosen and classified into external parallel, internal parallel, external taper, internal taper groups. Finite elements analysis was conducted with ANSYS Multi Physics software. Fatigue fracture test was performed by connecting the mold to the dynamic load fatigue testing machine with maximum load of 600N and minimum load of 60N. The entire fatigue test was performed with frequency of 14Hz and fractured specimens were observed with Hitachi S-3000 H scanning electron microscope. The results were as follows: 1. In the fatigue test of 2 mm exposed implants group, Tapered type and external connected type had higher fatigue life. 2. In the fatigue test of 4 mm exposed implants group, Parallel type and external connected types had higher fatigue life. 3. The fracture patterns of all 4 mm exposed implant system appeared transversely near the dead space of the fixture. With a exposing level of 2 mm, all internally connected implant systems were fractured transversely at the platform of fixture facing the abutment. but externally connected ones were fractured at the fillet of abutment body and hexa of fixture or near the dead space of the fixture. 4. Many fatigue striations were observed near the crack initiation and propagation sites. The cleavage with facet or dimple fractures appeared at the final fracture sites. 5. Effective stress of buccal site with compressive stress is higher than that of lingual site with tensile stress, and effective stress acting on the fixture is higher than that of the abutment screw. Also, maximum effective stress acting on the parallel type fixtures is higher. It is careful to use the internal type implant system in posterior area.

Aging Effects in the Two-phase Intermetallic compounds Based on Cr-doped $\textrm{Ll}_2\textrm{Al}_3\textrm{Ti}$ (Cr 첨가 $\textrm{Ll}_2\textrm{Al}_3\textrm{Ti}$기 2상 금속간화합물의 시효처리 효과)

  • Lee, Jae-Gyeong;Park, Jeong-Yong;O, Myeong-Hun;Wi, Dang-Mun
    • Korean Journal of Materials Research
    • /
    • v.9 no.10
    • /
    • pp.951-955
    • /
    • 1999
  • Two-phase Al-21Ti-23Cr alloy containing 20 vol.% $\textrm{Cr}_{2}\textrm{Al}$ as a second phase in the $Ll_2$ matrix is located in the two- phase region of the Al- Ti- Cr phase diagram at $1150^{\circ}C$, while in the three-phase region at $1000^{\circ}C$. Based on this result, the mechanical properties of the A1-21Ti-23Cr alloy were enhanced through the refined precipitation of the third phase in the $Ll_2$ matrix by aging the alloy below $1000^{\circ}C$. It was observed that a several ,m of the third phase precipitated in the $Ll_2$ matrix through aging at $800^{\circ}C$ and $1000^{\circ}C$, but the precipitation was not observed below $600^{\circ}C$. Furthermore, the third phase was more finely precipitated at $800^{\circ}C$ than at $1000^{\circ}C$. Although the third phase precipitated at $800^{\circ}C$ and at $1000^{\circ}C$, the compressive yield strength increased rapidly at $800^{\circ}C$ only. This is probably attributable to the refined precipitation of the third phase in the $Ll_2$ matrix. It is expected that the precipitation of the third phase. which was confirmed to be the TiAlCr phase, improves the mechanical properties by preventing crack propagation in the $Ll_2$ matrix.

  • PDF

A STUDY ON FRACTURAL BEHAVIOR OF DENTIN-RESIN INTERFACE (상아질-복합레진 접착계면의 파괴거동에 대한 연구)

  • Ryu, Gil-Joo;Choi, Gi-Woon;Park, Sang-Jin;Choi, Kyung-Kyu
    • Restorative Dentistry and Endodontics
    • /
    • v.32 no.3
    • /
    • pp.208-221
    • /
    • 2007
  • The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

The effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns (다양한 부위에서의 감소된 두께가 지르코니아 크라운의 파절 저항에 미치는 영향)

  • Abukabbos, Layla;Park, Je Uk;Lee, Wonsup
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.60 no.2
    • /
    • pp.135-142
    • /
    • 2022
  • Purpose. This study aims to evaluate the combined effect of reduced thickness in different regions on the fracture resistance of monolithic zirconia crowns. Materials and methods. Seven nickel-chromium dies were generated from a 3D model of mandibular first molar using the digital scanner with the following geometries: 1.5 mm occlusal reduction, 1.0 mm deep chamfer. Based on the abutment model, Zirconia blocks (Luxen Zirconia) were selected to fabricate Sixty-three zirconia crowns with occlusal thicknesses of 0.3 mm, 0.5 mm, and 1.5 mm, and different axial thicknesses of 0.3 mm, 0.5 mm, and 1.0 mm. All crowns were cemented by resin cement. Next, the crowns were subjected to load-to-fracture test until fracture using an electronic universal testing machine. In addition, fracture patterns were observed with a scanning electron microscope (SEM). Two-way ANOVA and the Tuckey HSD test for post hoc analysis were used for statistical analysis (P < .05). Results. The mean values of fracture resistancerecorded was higher than the average biting force in the posterior region. The two-way ANOVA showed that the occlusal and axial thickness affected the fracture resistance significantly (P < .05). However, the effect of axial thickness on fracture resistance did not show a statistical difference when thicker than 0.5 mm. The observed failure modes were partial or complete fracture depending on the severity of crack propagation. Conclusion. Within the limitations of the present study, the CAD-CAM monolithic zirconia crown with extremely reduced thickness showed adequate fracture resistance to withstand occlusal load in molar regions. In addition, both occlusal and axial thickness affected the fracture resistance of the zirconia crown and showed different results as combined.

The Conceptual Intersection between the Old and the New and the Transformation of the Traditional Knowledge System (신구(新舊) 관념의 교차와 전통 지식 체계의 변용)

  • Lee, Haenghoon
    • The Journal of Korean Philosophical History
    • /
    • no.32
    • /
    • pp.215-249
    • /
    • 2011
  • This essay reflects on the modernity of Korea by examining the transformation of the traditional knowledge system from a historico-semantic perspective with its focus on the opposition and collision of the old and the new conception occurred in the early period(1890~1910) of the acceptance of the Western modern civilization. With scientific success, trick of reason, Christianity and evolutionary view of history, the Western modernity regarded itself as a peak of civilization and forced the non-Western societies into the world system in which they came to be considered as 'barbarism(野蠻)' or 'half-enlightened(半開).' The East Asian civilization, which had its own history for several centuries, became degraded as kind of delusion and old-fashioned customs from which it ought to free itself. The Western civilization presented itself as exemplary future which East Asian people should achieve, while East Asian past traditions came to be conceived as just unnecessary vestiges which it was better to wipe out. It can be said that East Asian modernization was established through the propagation and acceptance of the modern products of the Western civilization rather than through the preservation of its past experience and pursuit of the new at the same time. Accordingly, it is difficult to apply directly to East Asian societies Koselleck's hypothesis; while mapping out his Basic Concept of History, he assumed that, in the so-called 'age of saddle,' semantic struggle over concepts becomes active between the past experience and the horizon of expectation on the future, and concepts undergoes 'temporalization', 'democratization', 'ideologization', 'politicization.'The struggle over the old and new conceptions in Korea was most noticeable in the opposition of the Neo-Confucian scholars of Hwangseongsinmun and the theorists of civilization of Doknipsinmun. The opposition and struggle demanded the change of understanding in every field, but there was difference of opinion over the conception of the past traditional knowledge system. For the theorists of civilization, 'the old(舊)' was not just 'past' and 'old-fashioned' things, but rather an obstacle to the building of new civilization. On the other hand, it contained the possibility of regeneration(新) for the Neo-Confucian scholars; that is, they suggested finding a guide into tomorrow by taking lessons from the past. The traditional knowledge system lost their holy status of learning(聖學) in the process of its change into a 'new learning(新學),' and religion and religious tradition also weakened. The traditional knowledge system could change itself into modern learning by accepting scientific methodology which pursues objectivity and rationality. This transformation of the traditional knowledge system and 'the formation of the new learning from the old learning' was accompanied by the intersection between the old and new conceptions. It is necessary to pay attention to the role played by the concept of Sil(hak)(實學) or Practical Learning in the intersection of the old and new conceptions. Various modern media published before and after the 20th century show clearly the multi-layered development of the old and new conceptions, and it is noticeable that 'Sil(hak)' as conceptual frame of reference contributed to the transformation of the traditional knowledge system into the new learning. Although Silhak often designated, or was even considered equivalent to, the Western learning, Neo-Confucian scholars reinterpreted the concept of 'Silhak' which the theorists of civilization had monopolized until then, and opened the way to change the traditional knowledge system into the new learning. They re-appropriated the concept of Silhak, and enabled it to be invested with values, which were losing their own status due to the overwhelming scientific technology. With Japanese occupation of Korea by force, the attempt to transform the traditional knowledge system independently was obliged to reach its own limit, but its theory of 'making new learning from old one' can be considered to get over both the contradiction of Dondoseogi(東道西器: principle of preserving Eastern philosophy while accepting Western technology) and the de-subjectivity of the theory of civilization. While developing its own logic, the theory of Dongdoseogi was compelled to bring in the contradiction of considering the indivisible(道and 器) as divisible, though it tried to cope with the reality where the principle of morality and that of competition were opposed each other and the ideologies of 'evolution' and 'progress' prevailed. On the other hand, the theory of civilization was not free from the criticism that it brought about a crack in subjectivity due to its internalization of the West, cutting itself off from the traditional knowledge system.