• 한국표면공학회지
• /
• 제31권5호
• /
• pp.297-303
• /
• 1998

The influences of vanadium addition on the cavitation erosion resistance pf Fe-Cr-Ni-Si-C hardfacing alloy were investigated using a vibratory apparatus up to 30 hrs. It was shown that 1wt.%V additioned alloy improved the resistance to cavitation damage. However, further increase in V content up to 2wt.% reduced the cavitation erosion resistance. It was considered that the addition of V developed the cavitation erosion resistance by reducing the stacking fault energy of Fe-Cr-Ni-Si-C alloy. However, the further increase in V content seemed to reduce the cavitation erosion resistance by increasing the matrix/carbide interfacial area, which was the preferential sites of the cavitation damage.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.17-24
• /
• 1998

Plasma-sprayed coatings were obtained by spray-dried $Cr_2O_3$ powder with and without Mo addition. A reciprocal type tribo-tester was employed to examine friction and wear behavior of the specimens at room temperature. The composition and the worn surface of coated specimens were observed by XRD and SEM. The results showed that friction Coefficient of the Mo added specimens were lower than one of $Cr_2O_3$ specimen. But $Cr_2O_3$ specimen had a lower wear loss. Protecting layer were observed at the worn surface of coated specimens with Mo addition.

• 전기화학회지
• /
• 제1권1호
• /
• pp.45-51
• /
• 1998

Ni-MH 전지의 음극으로 쓰이는 수소저장합금(MH)의 한 종류인 $AB_2$계 합금은 수소저장량이 큰 장점이 있으나 초기활성화나 싸이클 수명 및 자기방전 특성이 나쁜 단점이 있다. 본 연구에서는 Zr-Ti-V-Mn-Ni계 합금에 비화학양론적으로 Cr을 소량 첨가했을 때와 La을 첨가하여 불화처리 했을 때의 초기활성화, 싸이클 수명 및 자기방전에 미치는 영향을 조사하였다 EPMA 및 SEM을 이용하여 합금의 표면을 분석하였으며 XRD 분석으로 결정구조를 관찰하였다. 또한 합금으로 전극을 제조하여 정전류 시험법, 임피던스법과 전위주사법 등에 의해 전극특성을 조사하였다. Cr이 첨가될수록 전극표면에 안정한 산화막이 형성되어 V등의 전해질로의 용해를 막아주어 충, 방전에 따른 수명특성 및 자기방전 특성을 향상시키지만 초기 전하이동 반응이 저해되어 초기활성화 특성이 악화되었다. La을 첨가 후 불화처리하면 표면에 반응성이 좋은 입자를 형성하여 전극의 초기 활성화가 크게 향상되었다.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.135-141
• /
• 1994

스퍼터방식으로 제조한 FeZrCrN 미결정박막의 질소 유입량의 변화와 Cr 첨가량 변화에 따라 연자기특성과 내반응성 및 내식성을 조사하였다. 질소 유립량 증가에 따라 포화자속밀도는 감소하고 적 절한량(질소 유입량 3%)의 질소가 유입 되었을 때 열처리후에도 이방성 분산 감소효과 등에 의하여 우수 한 연자기특성이 출현 하였으며, 이때 보자력은 0.4 Oe, 투자율은 5 MHz에서 2600 정도를 나타내었다. FeZrN 박막에 Cr을 7.5 at.% 정도 첨가하였을때 포화자속밀도는 12.5kg까지 감소하였지만 양호한 연자기 특성이 그대로 유지되었고 Cr 첨가에 의해 현저한 내식성의 향상과 집합 glass와의 내반응성의 개선이 있었다.

• 한국환경농학회지
• /
• 제9권2호
• /
• pp.113-119
• /
• 1990

토양중(土壤中) Cr, Ni, Cd, Cu, Zn을 각각(各各) 0, 20, 50, 100, 200ppm첨가(添加)하고 무와 배추의 발아(發芽) 및 생육(生育)에 미치는 각(各) 중금속(重金屬)의 영향(影響)을 조사(調査)하였다. 무우와 배추의 발아(發芽)는 Ni와 Cr 200ppm첨가(添加) 토양(土壤)에서 심한 억제(抑制)를 받았으나 Cu, Cd, Zn 200 ppm첨가(添加) 토양(土壤)에서는 크게 영향(影響)을 받지 않았다. 5종(種)의 중금속(重金屬)이 무우와 배추의 생육(生育) 억제(抑制)에 미치는 영향(影響)은 Cr>Ni>Cd>Cu>Zn순(順)였으며 무우보다 배추가 더 크게 억제(抑制)를 받았다. 무우에 대하여 50%이상(以上) 심한 생육억제(生育抑制)를 보였던 각 중금속(重金屬)의 첨가농도(添加濃度) Cr가 20ppm, Ni, Cd과 Cu은 50ppm, Zn은 200ppm였으며, 배추에 대하여 Cr, Ni, Cd, Cu가 20ppm, Zn은 200ppm였다. 중금속(重金屬)에 의한 2가지 작물(作物)의 생육억제(生育抑制)는 토양중(土壤中) 퇴비(堆肥)와 석회(石灰)의 첨가(添加)에 의하여 현저(顯著)히 경감(輕減)되었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.33-35
• /
• 2011

Films of CrAlN and CrZrN were deposited on a steel substrate by closed field unbalanced magnetron sputtering, and their oxidation behaviors were investigated. CrAlN films consisted of dense, polycrystalline CrN and AlN fine columns. The formed oxides consisted primarily of crystalline $Cr_2O_3$ incorporated with $Al_2O_3$. The oxide layers were thin and compact so as to make CrAlN films more protective than CrN films. In case of CrZrN films, Zr atoms were dissolved in the CrN phase. Zr atoms advantageously refined the columnar structure, reduced the surface roughness, and increased the micro-hardness. However, the addition of Zr did not increased oxidation resistance, mainly because Zr was not a protective element. All the deposited films displayed relatively good oxidation resistance, owing to the formation of the highly protective $Cr_2O_3$ on their surface. The $Cr_{40}Zr_9N$ and $Cr_{31}Zr_{16}N$ films oxidized to $Cr_2O_3$ as the major phase and ${\alpha}-ZrO_2$ as the minor one, whereas the CrN film oxidized to $Cr_2O_3$.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권5호
• /
• pp.285-297
• /
• 2014

This paper presents the results of an investigation into bi-directional communication in spectrum sharing-based cognitive radio (Bi-CR) systems. A Bi-CR system can increase the spectral efficiency significantly by sharing the spectrum and through the bi-directional use of spatial resources for two-way communication. On the other hand, the primary user experiences more interference from the secondary users in a Bi-CR system. Satisfying the interference constraint by simply reducing the transmission power results in performance degradation for secondary users. In addition, secondary users also experience self-interference from echo channels due to full duplexing. These imperfections may weaken the potential benefits of the Bi-CR system. Therefore, a new way to overcome these defects in the Bi-CR system is needed. To address this need, this paper proposes some novel power allocation schemes for the Bi-CR system. This contribution is based on two major analytic environments, i.e., noise-limited and interference-limited environments, for providing useful analysis. This paper first proposes an optimal power allocation (OPA) scheme in a noise-limited environment and then analyzes the achievable sum rates. This OPA scheme has an effect in the noise-limited environment. In addition, a power allocation scheme for the Bi-CR system in an interference-limited environment was also investigated. The numerical results showed that the proposed schemes can achieve the full duplexing gain available from the bi-directional use of spatial resources.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.167-171
• /
• 2001

High temperature deformation behavior of Fe-28Al-5Cr alloy has been investigated known to show anomalous temperature dependence of yield strength. Specifically, the effect of Cr addition has been examined. A series of tensile and load relaxation tests have been carried out to obtain the flow behavior of Fe-28Al-5Cr alloy at the elevated temperatures. The flow curves have then been analyzed using the inelastic deformation theory recently proposed. Firstly, high temperature flow stress of iron aluminides can be resolved into internal stress and frictional stress. Secondly, the temperature corresponding to peak strength gets higher level at faster strain rate, which presumably due to the increased contribution of internal stress in observed flow stress. And thirdly, the alloying of Cr seems to cause solid-solution strengthening of frictional stress level and the elevation of 2nd order transition temperature. In this analogy, Fe-28Al-5Cr exhibits better strength especially at relatively higher temperature and lower strain rate than Fe-28Al.

• 대한약침학회지
• /
• 제12권2호
• /
• pp.31-40
• /
• 2009

Objective : This study was carried out to investigate protective effects of Pharmacopuncture Solutions (PSs) made by Carthmi Flos (CF), Cnidii Rhizoma (CR) and Astragali Radix (AR) on C6 glioma cells Methods : We investigated the effects of PSs on proliferation rates and types of C6 cells, and also investigated the effects on LDH release. In addition, protective effects of PSs on oxidative stress induced by hydrogen peroxide and SOD-like activities were also investigated. Results : PSs made by CF, CR and AR did not show cytotoxicity in various concentrations. CF-PS and AR-PS elevated levels of proliferation rates significantly. Treatment with CF-PS lowered level of LDH release in C6 cells. In addition, CF-PS and CR-PS showed protective effects on cell death induced by hydrogen peroxide respectively. Finally, CF-PS group showed high level of SOD-like activity compared to that in CR-PS group. Conclusion : These results suggest that CF-PS can accelerate proliferation of neuroglial cells, and has protective action against oxidative stress, which was involved in anti-oxidative effects such as SODlike activities. In addition, CR has protective effects against oxidative stress, and AR can accelerate proliferation of neuroglial cells.

• 한국재료학회지
• /
• 제4권6호
• /
• pp.669-680
• /
• 1994

합금원소(Cr, V, Si. Mo, Nb)가 첨가된 TiAi 금속간화합물의 고온 산화거동을 대기중의 900~$1100^{\circ}C$에서 관찰하였다. 산화반응물은 XRD, SEM, WDX을 이용하여 분석하였다. 등온 산화에 있어서 Cr과 V이 각각 첨가된 시편은 무게증가가 많았으나, Si, Mo, Vb가 각각 첨가된 시편은 상대적으로 무게증가각 적었아. 그리고, Cr과 V이 각각 첨가된 시편의 산화속도는 TiAi의 그것보다 항상 크게 나타났으며, Si, Mo, Vb가 각각 첨가된 시편의 산화속도는 TiAi의 그것보다 향상되지 않고, Si, Mo또는 Nb 첨가는 내산화성을 향상시킨다. Si, Mo, Nb이 각각 첨가된 TiAI합금표면에 형성된 산화물은 보호막 역할을 함으로 산소와 합금원소의 확산을 감소시키는 역할을 하였다. 특히, Nb는 산화의 초기단계에서는 $AI_{2}O_{3}$를 형성하려는 경향이 강하기 때문에 연속적인 $AI_{2}O_{3}$층과 조밀한 $Tio_{2}+AI_{2}O_{3}$ 혼합층이 형성되었다. Nb가 첨가된 합금의 백금 marker 실험결과에 따르면, 산소가 주로 합금내부로 확산하여 합금표면에서 산화물을 형성하였다. $900^{\circ}C$에서의 열반복주기(thermal cyclic)산화실험 결과, 다른 합금원소와 비교해 볼 때 Cr또는 Nb첨가가 금속기지와 산화층간의 접착력을 향상시키는 것으로 나타났다.