• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.358-368
• /
• 1990

To investigate the possibility of utilizing of sister chromatid exchange(SCE) analysis in lymphocytes as an indicator which could evaluate the effects of mutagenicity after in vivo exposure to hexavalent chromium, this study was conducted using some of chromium plating workers occupationally exposed to hexavalent chromium, chromium trioxide ($CrO_3$) in Taegu city. The study population was 12 Cr platers with perforation of nasal septum, 12 Cr platers without perforation of nasal septum and 20 controls. The SCE in peripheral blood lymphocytes of the subjects was analyzed and blood chromium concentration was estimated using the atomic absorption spectrophotometer (IL551) equipped with furnace atomizer (IL755). The mean SCE frequencies for Cr platers with and without perforation of nasal septum were statistically higher than those for control. The difference in SCE frequencies by age, smoking habits were not statistically significant both in Cr platers and controls. There was no difference in SCE frequencies by career of Cr platers workers. In Cr platers, the correlation between the mean SCE frequencies and chromium concentration in blood was not statistically significant. Using the transformation $y=(sum\;SCE)^{\frac{1}{2}}+(sum\;SCE+1)^{\frac{1}{2}}$, when the data was studied by multiple regression, it appeared that the influence of the occupation was the most important. Age, smoking, occupation and CrB(blood chromium concentration) together explain only 32.3% of interpersonal variation on SCE. The results in this study suggest tt a genetic risk due to occupationally exposure to hexavalent chromium is clearly inferable and thus, SCE analysis in human lymphocytes may be used indicator of biological toxic effects of chromium. Further, populatio analysis stuies are required before SCE frequency can be used as a mutagenic indicator in human population.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.79-85
• /
• 2016

It is imperative to find environment-friendly coatings as an alternative to the currently used hexavalent chromate conversion coatings for the purpose of improving the anti-corrosion properties of aluminum alloys. Hence, in this study, the corrosion properties of a trivalent chromate conversion coating solution are analyzed and measured. Because of the presence of multiple components in trivalent chromate conversion coating solutions, it is difficult to control plating, attributed to their mutual organic relationship. It is of significance to determine the concentrations of the components present in these coatings; hence, qualitative and quantitative analysis is required. The coating solution contained not only an environment-friendly component chromium(III), but also zirconium, fluorine, sulfur, and potassium, in the coating film. These metals are confirmed to produce a film with improved corrosion resistance to form a thin layer. The excellent corrosion resistance for the trivalent chromate solution is attributed to various inorganic and organic additives.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.213-213
• /
• 2014

$300^{\circ}C$와 $500^{\circ}C$에서 아크 이온 증착된 도포층의 조성은 각각 Fe : Al : Ti : Si : N = 1.31 : 36.52 : 31.31 : 0.48 : 30.38 [wt.%]와 Fe : Cr : Al : Ti : Si : N = 1.24 : 0.56 : 36.82 : 32.72 : 0.59 : 28.07 [wt.%] 이었다. 0.1N $H_2SO_4$ 수용액과 인공해수 (ASTM D1141-98) 분위기에서 $300^{\circ}C$, $500^{\circ}C$에서 증착된 도포층의 부식전압과 부식속도는 각각 $-0.2787V_{SHE}$, $0.002A/cm^2$, $-2.764V_{SHE}$, $0.002A/cm^2$ 와 $-0.2799V_{SHE}$, $0.002A/cm^2$, $-0.0394V_{SHE}$, $0.002A/cm^2$이었다. 나노 경도값은 각각 23.6, 25.8 GPa 이었다. 이는 각각 2208.2, $2434.2H_V$에 해당되었다.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.262-272
• /
• 1998

The experiences and causes of pressure tube cracking accidents in the CANDU reactors and the development of the fuel channel at AECL(Atomic Energy Canada Limited) have been described. Most of the accidents were caused by Delayed Hydride Cracking(DHC). In the cases of the Pickering units 3&4 and the Bruce unit 2, excessive residual stresses induced by an improper rolled joint process played a role in DHC. In the Pickering unit 2, cracks formed by contact between the pressure and calandria tubes due to the movement of the garter spring were the direct cause of the failure. To extend the life of a fuel channel, several R&D programs examining each component of the fuel channel have been carried out in Canada. For a pressure tube, the main concern is focused on changing the fabrication processes, e.g., increasing cold working rate, conducting intermediate annealing and adding a third element like Fe, V, and Cr to the tube material. In addition to them, chromium plating on the end fitting and increasing wall thickness at both ends of the calandria tube are considered. There has also been much interest in the improvement of fuel channel performance in our country and several development programs are currently under way.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.175-175
• /
• 2016

Sn도금액은 강산에서는 $Sn^{2+}$, 강알칼리에서는 $Sn^{4+}$석출이 안정하다. 중성영역은 도금액에 $Sn^{2+}$침전을 방지하기 위하여 착화제가 필요하다. 기록에 남아 있는 가장 오래된 Sn도금은 1856년 Gore가 4가의 주석산염을 사용한 알칼리성용액이다. 그 후 50~60년 사이에 2가의 염화주석($SnCl_2$)과 KOH에 Cyan 등의 착화제를 첨가한 도금액이 발표되었다. 최초의 실용적인 알칼리주석용액은 1931년 Oplinger의 4가 주석산 염으로서, $CH_3COONa$를 완충제로 사용하였고, $Sn^{2+}$을 산화시키기 위하여 과산화물이나 과 붕산염을 첨가하였다. 알칼리성 Sn용액은 Natrium용액과 Kalium용액이 있지만, Kalium염이 용해성이 좋고, Sn농도를 높여 전류밀도를 높일 수 있다. 알칼리성용액은 도금속도가 산성용액의 1/2로 되고, 음극효율도 80~90% 정도 낮아, 두꺼운 피막이나 생산성을 중시하는 부품에는 적합하지 않다. 초기의 산성용액은 Sn의 정련목적으로 사용되었고, Pb정련에 사용된 Fluor규산용액에 Gelatine을 첨가하였다. Mathers는 Cresol산을 첨가하여 미량의 Cresol포화용액을 사용하여 고속으로 두껍게 석출시킬 수 있었다. 독일의 Schloetter도 다양한 방향족 술폰산으로써 반 광택피막을 실현하였다. 산성Sn도금액은 첨가제에 어떠한 유기화합물을 사용하는가는 도금장치나 석출상태로써 결정할 수 있다. Hothersall과 Bradshaw는 Cresol술폰산을 첨가하여 도금액 안정성 향상을 발견했다. Cresol술폰산은 $Sn^{2+}$의 안정제이며, Gelatine은 분산제기능을 한다. 붕 불화용액은 Sn농도를 높일 수 있고, $2{\sim}12A/dm^2$의 고 전류밀도의 도금이 가능하다. 1937년 Schloetter가 개발하여 미국의 제철회사에서 사용되었다. Sn-Ni도금은 Ni도금보다도 뛰어난 내식성이 있기 때문에 자전거, 자동차부품에 사용되고 있다. 실용도금액은 1951년 Parkinson이 발표한 HBF/HCL용액이다. $SnCl_2$산성용액에서 표준전위는 -0.136V인데 비하여, Ni이온의 표준전위는 -0.25V이다. HF용액에서는 불화물이온이 $Sn^{2+}$의 석출전위를 (-)방향으로 이동시켜서 합금석출이 가능하다. Sn-Co도금은 Cr도금의 색조에 가깝고, 장식목적으로 사용된다. Cr도금 대체용으로 사용된다. 내마모성이나 내식성은 Cr도금보다도 떨어지기 때문에 장식목적에 한정된다. 1953년 Parkinson은 Sn-Ni도금연구에서 동일한 용액조성으로부터 Co 30%를 석출시켰다. Sn-Zn도금은 방식도금으로서 자동차부품에 많이 사용되고 있다. Sn과 Zn의 표준전위는 서로 멀리 떨어져 있기 때문에 산성용액에서는 공석될 수 없다. 1980년대에 들면서, 방식Cd(Cadmium)도금의 독성 때문에 Sn-Zn도금을 재인식 하게 되었다. 1957년 Vaid 등이 No Cyan도금액을 발표했다. 그 후 러시아의 연구자가 안정한 도금액을 연구하였고, Srivastava와 Muckergee가 1976년에 종합하였다.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.6-13
• /
• 2012

HVOF thermal spray coating of 80%WC-CoFe powder is one of the most promising candidate for the replacement of the traditional hard chrome plating and hard ceramics coating because of the environmental problem of the very toxic $Cr^{6+}$ known as carcinogen by chrome plating and the brittleness of ceramics coatings. 80%WC-CoFe powder was coated by HVOF thermal spraying for the study of durability improvement of the high speed spindle such as air bearing spindle. The coating procedure was designed by the Taguchi program, including 4 parameters of hydrogen and oxygen flow rates, powder feed rate and spray distance. The surface properties of the 80%WC-CoFe powder coating were investigated roughness, hardness and porosity. The optimal condition for thermal spray has been ensured by the relationship between the spary parameters and the hardness of the coatings. The optimal coating process obtained by Taguchi program is the process of oxygen flow rate 34 FRM, hydrogen flow rate 57 FRM, powder feed rate 35 g/min and spray distance 8 inch. The coating cross-sectional structure was observed scanning electron microscope before chemical etching. Estimation of coating porosity was performed using metallugical image analysis. The Friction and wear behaviors of HVOF WC-CoFe coating prepared by OCP are investigated by reciprocating sliding wear test at $25^{\circ}C$ and $450^{\circ}C$. Friction coefficients (FC) of coating decreases as sliding surface temperature increases from $25^{\circ}C$ to $450^{\circ}C$.

• Analytical Science and Technology
• /
• v.11 no.4
• /
• pp.297-304
• /
• 1998

The three analysis methods, EPA method 3050, the method offered by Ministry of Environment in Korea, and modified method corrected in this laboratory, were studied to investigate the effect of matrix on the analysis of inorganic priority pollutants. 7 inorganic priority pollutants(Ni, Cr, Cu, Zn, Pb, Cd, Hg) were spiked to the plating, leather, paper, electric, and dye sludges. Mean recovery of the elements except Hg was 95.5% when the procedure of EPA method was applied. However, recovery by the two other extraction methods showed 11.1% and 27.7%, respectively. Digestions were done by MDS (microwave digestion system) and $HNO_3+HClO_4$ methods. To study organic and inorganic matrix effect, samples were made by adding triethanol amine as a organic matrix and $FeCl_3{\cdot}6H_2O$+$AlCl_3{\cdot}6H_2O$ as a inorganic matrix, respectively. The extracts were analyzed by AAS and HG-AAS. Mean recovery of the elements by the $HNO_3+HClO_4$ procedure, except Hg, gave better result than that of the MDS method. Mean recovery of elements was decreased when organic and inorganic matrices were added in the sludge samples. The procedure of MDS and $HNO_3+HClO_4$ digestion gave higher recoveries than that of direct analysis. In general, the results of the studies showed a significant matrix effect on the inorganic priority pollutants analysis in sludges.

• The korean journal of orthodontics
• /
• v.28 no.3 s.68
• /
• pp.371-377
• /
• 1998

To estimate the possibility of clinical application of TiN ion-Plated Elgiloy(Co-Cr wire), measurements of tensile strength and hardness were made on the four tempers on each of the manufactured Elgiloy, the (heat-treated) Elgiloy for 30 minutes at $250^{\circ}C$ and the TiN ion-plated Elgiloy. For comparison, the tensile strength and hardness of Stainless Steel wires were also measured. The following are the results of the study: $\cdot$In the 4 tempers, tensile strength was the greatest in the TiN ion-plated group, followed by the heat-treated Elgiloy group and the manufactured Elgiloy group, but no statistical difference was noticed between heat-treated and manufactured Elgiloy groups(p>0.05). $\cdot$In each temper, tensile strength of ion-plated Elgiloy increased about $10kgf/mm^2$ in comparison with the values of the manufactured Elgiloy $\cdot$In yellow, green and red tempers except the blue, hardness was the greatest in ion-plated group. In the blue temper, there was no statistical difference between heat-treated and manufactured Elgiloy groups(p>0.05). $\cdot$In each temper, hardness of ion-plated Elgiloy increased about 50-90VHN in comparison with the values of the manufactured Elgiloy. $\cdot$The tensile strength of Stainless Steel wire was similar to that of the red temper of manufactured Elgiloy and the green temper of ion-plated Elgiloy.

• Clean Technology
• /
• v.8 no.2
• /
• pp.85-92
• /
• 2002

Red mud is generated as a by-product during the production of aluminum hydroxide from bauxite ore. In this study the red mud coagulants were prepared by reacting 100 ml of 5 M $H_2SO_4$ solution with 10g of red mud at $85^{\circ}C$ or by reacting 100ml of 9M HCl solution with 10g of red mud at $25^{\circ}C$. The prepared red mud coagulants were tested for their coagulation performance of pollutants in the municipal and industrial wastewater. In addition, the coagulation performance was compared with that of a commercially available coagulant ($FeCl_3$). As a result, the red mud coagulants were found to have a good removal efficiency of pollutants in the municipal wastewater (turbidity, phosphate phosphorus) and in the plating wastewater (turbidity, $Pb^{2+}$, $Cd^{2+}$, $Cu^{2+}$, $Zn^{2+}$, $Cr^{3+}$). In the experiment to remove COD in the petrochemical wastewater, the COD removal efficiency by the red mud coagulants was a little poor, but it was better than that by $FeCl_3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.421-421
• /
• 2008

Generally, the polymer thick-film resistors for embedded organic or hybrid substrate are patterned by screen printing so that the accuracy of resistor pattern is not good and the tolerance of resistance is too high(${\pm}$20~30%). To reform these demerits, a method using Fodel$^{(R)}$ technology, which is the patterning method using a photosensitive resin to be developable by aqueous alkali-solution as a base polymer for thick-film pastes, was recently incorporated for the patterning of thermosetting thick-film resistor paste. Alkali-solution developable photosensitive resin system has a merit that the precise patterns can be obtained by UV exposure and aqueous development, so the essential point is to get the composition similar to PSR(photo solder resist) used for PCB process. In present research, we made the photopatternable resistor pastes using 8 kinds of epoxy acrylates and a conductive carbonblack (CDX-7055 Ultra), evaluated their developing performance, and then measured the resistance after final curing. To become developable by alkali-solution, epoxy acrylate oligomers with carboxyl group were prepared. Test coupons were fabricated by patterning copper foil on FR-4 CCL board, plating Ni/Au on the patterned copper electrode, applying the resistor paste on the board, exposing the applied paste to UV through Cr mask with resistor patterns, developing the exposed paste with aqueous alkali-solution (1wt% $Na_2CO_3$), drying the patterned paste at $80^{\circ}C$ oven, and then curing it at $200^{\circ}C$ during 1 hour. As a result, some test compositions couldn't be developed according to the kind of oligomer and, in the developed compositions, the measured resistance showed different results depending on the paste compositions though they had the same amount of carbonblack.