• Economic and Environmental Geology
• /
• v.42 no.2
• /
• pp.121-131
• /
• 2009

The distribution characteristics of heavy metals for surface sediments in east oceanic dumping area (EDA) and west oceanic dumping area (WDA) are evaluated by grain sizes, minerals, sedimentation rates and compositions of heavy metals. The mean grain sizes in EDA and WDA range from $7.95{\Phi}$ to $8.51{\Phi}$ and $7.42{\Phi}$ to $8.15{\Phi}$, respectively. These are mostly belonging to the M (mud) type. Minerals in the surface sediments consist of illite with chlorite, smectite, and kaolinite. Sedimentation rates estimated by $^{210}Pb$ method in EDA and WDA are 1.11 mm/yr$\sim$1.73 mm/yr and 1.87 mm/yr, respectively. According to the interrelationship, concentrations of Ni, Cu, Cr, and Zn are closely associated with mean grain size, Al, and Fe, whereas concentrations of Cd and Pb are poorly associated with ones. The enrichment factors of these elements are higher than 1.5, suggesting that the concentrations of Cd and Pb in the surface sediments are affected by anthropogenic sources. The $I_{geo}$-class numbers of Cd and Pb in the surface sediments are mostly classified in 2 to 4, showing moderate to strongly polluted. These numbers in EDA are higher than that of WDA, and the highest number is 4, indicative of the strongly polluted class. Our results show that the disposed wastes at EDA include mineralogical wastes, dredged materials from sewage disposals, and sludges from constructions having materials of WDA. The annual amount of oceanic dumping in EDA is double than that in WDA.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2015

Purpose: 3-methylcrotonyl CoA carboxylase deficiency (3MCCD) is leucine metabolic disorder caused by mutation in MCCC1 or MCCC2 gene. Clinical manifestations are variable, ranging from fatal neonatal onset to asymptomatic individuals. There is no retrospective study of Korean patients undergoing long-term treatment for 3MCCD. We reported this study to find out clinical symptoms and gene analysis of 3MCCD patients. Methods: This study was based on data of patients diagnosed with 3MCCD in Soonchunhyang university hospital between April 2009 and September 2013. We report clinical, enzymatic and mutation data of 3MCCD patients found by newborn screening. Results: In tandem mass spectrometry, 3-OH-isovalerylcarnitine (C5OH) of all patients increased. And all 7 patients were elevated 3-methylcrotonylglycine (3MCG) and 3-hydroxyisovaleric acid (3HIVA) in urine. MCCC mutation was identified in 2 patients and MCCC2 was mutated in 5 patients. We found mutation occurred in 8 different parts of nucleotide and such mutation caused 7 different types of changes in amino acid. All patients are on medication of L-carnitine and L-glycine. 4 patients are taking biotin. And 4 patients are eating leucine free formula. After starting treatment, there were no significant changes of urine 3MCG and 3HIVA levels. Conclusions: According to our data, MCCC2 gene mutation was more common than MCCC1 gene mutation. But the level of 3HIVA or 3MCG in urine has no correlation with phenotype. All patients has no symptoms and are shown normal development.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.254-266
• /
• 1997

This study was to know the usefulness of argon laser for composite resin, to prove the polymerized effect of heat treatment of composite resin inlay and to get the curing method for optimal physical properties of composite resin inlay. In this study we used four light curing units and one heat curing unit: Visilux $II^{TM}$, a visible light gun: $SPECTRUM^{TM}$, an argon laser: Unilux AC$^{(R)}$ and Astorn XL$^{(R)}$, visible light curing unit: CRC-$100^{TM}$ for heat treatment. Compared to a control group, we divided the experemental groups into five as follows: Control group: Light curing(Visilux $II^{TM}$) Experimental group 1 : Light curing(Visilux $II^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 2: Light curing(Visilux $II^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment(CRC-$100^{TM}$) Experimental group 3 : Laser curing($SPECTRUM^{TM}$) Experimental group 4 : Laser curing($SPECTRUM^{TM}$) + Light curing(Unilux AC$^{(R)}$) Experimental group 5 : Laser curing($SPECTRUM^{TM}$) + Light curing(Astron XL$^{(R)}$) + Heat treatment (CRC-$100^{TM}$) According to the above classification, we made samples through the curing of Clearfil CR Inlay$^{(R)}$, which is a composite resin for inlay, in a separable cylindrical metal mold and polycarbonate plate. And then, we measured and compared the value of compressive strength, diametral tensile strength and the surface micro hardness of each sample. The results were as follows : 1. Among the experimental groups, group 5 showed the highest value of compressive strength, $157.50{\pm}10.24$ kgf and control group showed the lowest value of compressive strength, $103.93{\pm}21.93$ kgf. Control group showed significant difference with the experimental groups(p<0.001). Group 2 which was treated by the heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was significant difference group 4 and group 5(p<0.001). 2. Among the experimental groups, group 5 showed the highest value of diametral tensile strength, $95.84{\pm}1.97$ kgf and control group showed the lowest value of diametral tensile strength, $81.80{\pm}2.17$ kgf. Control group which was cured by visible light showed higher diametral tensile strength than group 3 which was cured Argon Laser. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 3. Among the experimental groups, group 5 showed the highest value of microhardness of top surface, $148.42{\pm}9.57$ kgf and control group showed the lowest value of microhardness, $111.43{\pm}7.63$ kgf. In the case of bottom surface, group 5 showed the highest value of $146.19{\pm}7.62$ kgf, and control group showed the lowest, $104.03{\pm}11.05$ kgf. Group 3 which was cured by Argon Laser showed higher diametral tensile strength than control group which was cured only with a visible light gun. Group 2 which was treated by heat showed higher compressive strength than that of group 1 which was not, and there was a significant difference between group 1 and group 2(p<0.001). Group 5 which was treated by heat showed higher compressive strength than group 4 which was not, and there was a significant difference group 4 and group 5(p<0.001). 4. According to the above results, we took a conclusion that argon laser can be used as a useful unit for curing the composite resin and heat treatment can improve the physical properties of the composite resin inlay.

• Development and Reproduction
• /
• v.5 no.1
• /
• pp.73-79
• /
• 2001

Recently many studies have reported that total and bioavailable androgens reduced in male and female athletes and that physical exercise reduces the body weight and increases the reproductive abnormalities such as oligomenorrhea, anovulation, inadequate luteal phase, and delayed puberty in women by the inhibition of the hypothalamic-pituitary-gonadal (HPG) axis . In addition, high mileage endurance 겨nning, psychological stress, and military endurance training in men also reduce the secretion of reproductive hormones. To investigate the efffcts of physical endurance exercise on the secretion of reproductive hormones in men, androgenic hormones from adrenal glands and testis were measured in serum by the conventional radioimmunoassays after long-term (more than3 months), short-term (1 week), and acute (1${sim}$2 hours) physical exercises. Androgenic hormones from adrenal glands and testis such as total testosterone (TT), free testosterone (fT), dehydroepiandrosterone (DHEA), and androstenedione (A) decreased after thesestrenuous endurance trainings, whereas ACTH, cortisol, and dehydroepiandrosterone sulfetes (DHEAS) increased. Conadotropins (LH and FSH) were not idluenced by the physical exercises. Based upon the present results, we assume that the decrease in adrenal and testicular androgens by physical endurance exercises might be associated with the reproductive abnormalities in athletes by unknown factor(s) in addition to the HPG axis disturbance.

• Korean Journal of Clinical Laboratory Science
• /
• v.50 no.2
• /
• pp.144-154
• /
• 2018

Metabolic disease is associated with abdominal obesity, high blood pressure, and dyslipidemia. Physical activity has beneficial effects on a variety of diseases. This study examined the relationship between metabolic diseases and physical activity according to age. Among a total of 7,295 subjects, the data from 382 individuals in the normal group and 1,525 persons in the metabolic disease group were analyzed. The data were analyzed statistically by one-way ANOVA, the Pearson's correlation coefficient, and multiple regression analysis. The levels of hemoglobin (HB), hematocrit (HCT), and creatinine (CR), were elevated when a high-intensity physical activity was performed, but they were reduced when a low-intensity physical activity was performed in the normal group aged 10~29 years and the metabolic disease group aged 50~69 years. In the normal group and metabolic disease group aged 30~49 years, the level of high density lipoprotein cholesterol (HDL-C) was elevated when high-intensity physical activity was conducted, whereas it was reduced when low-intensity physical activity was performed. No difference in the level of HDL-C depending on age and exercise intensity was observed in the normal group; the level of HDL-C decreased with age and increased with exercise intensity in the metabolic disease group. Physical activity has different effects in metabolic disease depending on age.

• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.22-30
• /
• 1982

Water quality of downstream of the Nagdong river, using for agricultural irrigation of the Gimhae plain, were observed. Water temperature, turbidity, residue, pH, BOD, COD, DO, hardness, chloride, sulphate, phosphate, inorganic nitrogenous compounds, sodium, general bacteria, E. coli and heavy metals of the water were investigated at Daejeo, Sikman, Bongrim, Noksan, Machal and Jangyou pumping stations in the Gimhae plain in May, July and October, 1981. The results obtained were as follows; 1) Average value of analyzed components of the water at all sampling sites were 7.8 pH, 6.3 ppm BOD, 6.5 ppm COD, 6.4 ppm DO, 231 ppm hardness, 582 ppm Cl-, 412 ppm $SO_4--$, 2.32 ppm $PO_4---$, 3.8 ppm $NH_4+,\;478\;ppm\;Na+$, 2964 No. /100 ml total coliform, 0.0040 ppm Cd, 0.0066 ppm Pb, respectively. 2) The most heavily polluted site of all investigated ones was Sikman. It seemed to be caused by the vast quantity of wastewater discharged from industrial district in Gimhae city. The next polluted sites were Bongrim, Daejeo and Noksan, and comparatively less polluted sites were Machal and Jangyou, judging from both appearance and physicochemical observation. 3) At Sikman, the most heavily polluted site, average value of components were 8.0 pH, 8.1 ppm BOD, 8.2 ppm COD. These values were close to the limit point of agricultural water quality standard of 8.0 ppm BOD (COD). 4) Any apparent variation was not observed by the sampling season in most components except DO and $NH_4+$. DO of October was higher than that of May or July but $NH_4+$ was low. 5) $NH_4+$ content was comparatively high in downstream of the Nagdong river of which water is used as the agricultural irrigation in the Gimhae plain. Therefore, fertilizer application on the farming land must make account of nitrogen content of the irrigation water 6) It was considered that chloride and sodium contents would not influence the crop cultivation in common season, but in dry season irrigation must be done carefully.

• Journal of Life Science
• /
• v.27 no.2
• /
• pp.217-224
• /
• 2017

Carbon monoxide (CO), a reaction product of cytoprotective enzyme heme oxygenase-1 (HO-1), is a gaseous messenger with anti-proliferative, anti-apoptotic, and anti-inflammatory actions in many cell types. Here, we investigated the role of CO on the process of monocyte differentiation induced by phorbol 12-myristate 13-acetate (PMA) in human monocytic THP-1 cells. CORM-2 (tricarbonyldichlororuthenium (II) dimer, $Ru2Cl_4(CO)_6$), a CO-releasing compound, decreased a marked cell adherence with a slight reduction of proliferation in monocytic THP-1 cells treated with PMA. And, CORM-2 significantly inhibited expression of differentiation markers such as CD14, CD11b plus CD18 (macrophage-1 antigen, Mac-1 or complement receptor 3, CR3) and phagocytosis of carboxylate-modified red fluorescent latex beads, in PMA-stimulated THP-1 cells. For the further experiments, differentiation of PMA-treated cells was enhanced after the initial 2 days stimulus by removing the PMA-containing media then incubating the cells in fresh media for a another 4 days. And, we observed the secretion of inflammatory cytokines and phagocytosis in differentiated macrophages. Treatment with CORM-2 significantly abolished the secretion of IL-6, $TNF-{\alpha}$ and phagocytosis using fluorescence-conjugated E. coli (K-12 strain) bioparticles in lipopolysaccharide (LPS)-stimulated differentiated macrophages. In conclusion, these results suggest that CO inhibits the differentiation of monocytic THP-1 cells as well as the activation of differentiated macrophages.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.791-799
• /
• 1996

The purpose of this study was to compare the shear bond strength of adhesion bridge by various resin cements. One hundred and foully 1st premolars were used. The teeth were cut below 2mm from CEJ and the coronal portions were used. The coronal portions were embeded with the acrylic resin and trimmed with sic paper until the flat plane with ${\phi}$ 4mm above acrylic resin sticks in height 5mm were casted with nonprecious metal and the using surfaces were treated with sic paper from #200 to #1200 and polished with alminum oxide paste. And then, the using surfaces were sandblasted and treated with the electrochemical etching. The teeth were divided into three groups of fourty two each. In group I, teeth and specimens were cemented with Panavia 21 In group II, teeth and specimens were cemented with Superbond In group I, teeth and specimens were cemented with All-Bond & composite resin cement Each group was subdivided into three subgroups according to the storage period ; one-day storage, fifteen-day storage, and thirty-day storage. The special jig was made. Then, the specimen and jig were mounted to Instron Universal Testing Machine and the failure were measured. The results were as follows. 1. There was statisfically significant difference between the failure loads of group I and group II and III after one day storage(P<0.01), 2. There was statisfically significant difference between the failure loads of group II and group I and III and between group I and group III at fifteen day storage(P<0.01). 3. There was statisfically significant difference between the failure loads of group I and II and group III after thirty day storage(P<0.01). 4. There was statisfically significant difference between the failure loads of one day storage and fifteen and thirty days storages in group III (P<0.01).

• Proceedings of the Ginseng society Conference
• /
• 1984.09a
• /
• pp.27-36
• /
• 1984

It was previously reported that red ginseng extract inhibited carcinogenesis by urethan, DMBA and aflatoxin $B_1E (Cancer Detection and Prevention, 6: 515-525, 1983). In an attempt to investigate the mechanism of the anticarcinogenic effect of ginseng, we assayed natural killer (N.K) activity in mice treated with urethan and benzo(a)pyrene. In our experiment newly born Swiss Webster mice, less than 24 hrs. old, were given a single subcutaneous injection of lmg of ure-than and 40ug of benzo(a)pyrene. The mice had been administered with ginseng since weaning, and sacrificed at various intervals. Major organs were examined both, with the naked eye and microscopically. N.K. activity of spleen cells was analyzed in a 12-hour $^{51}Cr^-release$ assay against YAC-1 cells. Administration of ginseng resulted in an increase of N.K. activity by $18\%$ at 4 weeks, $20\%$ (P < 0.05) at 6, $29\%$ (P < 0.05) at 12, and $13\%$ at 24 following a single injection of urethan. At the same time, significantly lower incidences of lung adenoma were noted at 6 weeks $(50\%)$ and 12 weeks $(27\%)$ following the administration of ginseng to urethan-injected mice. This result indicates that the enhancement of N.K. activity by ginseng makes a contribution to its anticarcinogenic effect. On the hand, N.K. activity was suppressed by benzo(a)pyrene during the time span of this experiment and it almost returned to the level of controls following the adminsitration of ginseng. However, the lung adenoma induced by benzo(a)pyrene began to occur at 48 weeks in which N.K. activity had naturally declined to a very low level in all experimental mice, and administration of ginseng did not decrease the incidence. In explanation of this result, we might propose that the recovery of the N.K. activity by ginseng had little effect on the incidence of lung adenoma because of the long latent period of carcinogenesis by benzo(a)pyrene. In conclusion, these results suggest that the anticarcinogenic effect of ginseng in urethan-treated mice may be related to the augmentation of N.K. activity.

• The korean journal of orthodontics
• /
• v.32 no.1 s.90
• /
• pp.19-31
• /
• 2002

To investigate the association between the hypertrophy of adenoid and jaw morphology during growth, this paper was based on children patients with experimental adenoids (male-15 subjects at each bone age group, female-15 subjects at each bone group) and comparing them to data taken from a control group (male-15 subjects at each bone age group, female-15 subjects at each bone group) with normal respiratory function. The comparisons between the groups were done at each growth stage using cervical vertebrae maturation index(CVMI) of Hassel. The obtained results were as follows : 1. The differences in craniofacial morphology between experimental group and control group were appeared from CVMI 3 and CVMI 4 (aroud adolescent period) in males, and from CVMI 1 in females. 2. The mandibular position of experimental group was more inferior than control group. The difference appeared at adolescent period(male : at CVMI 4, female : at CVMI 5). 3. Experimental group had greater anterior facial height than control group. This difference seemed a relation with lower anterior facial height. The difference appears at CVMI 3(11.94 ${\pm}$ 1.38 years old, at adolescent period) in male and at CVMI 1 in female. 4. The adenoid size of control male group was increased until CVMI 2(10.58 ${\pm}$ 1.07 years old, just before adolescent growth peak) and then decreased, but in female the adenoid size was decreased from CVMI 1(6.92 ${\pm}$ 0.53 years old).