• Journal of the Korean Data and Information Science Society
• /
• v.19 no.1
• /
• pp.37-51
• /
• 2008

In this article, the aim is at evaluating the knowledge level of the foodbome disease by developing a reasonable survey questionnaire model. Each questions of the questionnaire is made up to check the knowledge covering the several fields of materials related to the foodbome disease. The pilot survey is implemented to evaluate the validity of questionnaire. Each question in questionnaire is scored to get the quantitative measure of the foodbome disease knowledge by converting the total score into 100 points.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.102-107
• /
• 1998

Axisymmetric flows in an optical fiber coating applicator were computed by using structured finite volume solver FLUENT. The numerical computations were performed for various draw speeds from 900m/min to 1,200m/min. The physical phenomena in the coating applicator is the main topic of this paper. The results of the simulations covering streamline, pressure, temperature, and fluid-fluid interface are shown in this paper.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1141-1149
• /
• 2003

Refractory industry in technologically advanced countries has long been on gradual decline due to leveled-off steel production and decreasing unit consumption of refractories for steel. Notable technological achievements by refractory industry that contributed significantly to steel production are briefly reviewed covering from blast furnace, basic oxygen furnace to continuous casting. Future possibility to revitalize the refractory industry is discussed on the basis of the review, taking into account opportunities available in environment and energy related sector of industries.

• 한국약용작물학회:학술대회논문집
• /
• 2010.10a
• /
• pp.203-204
• /
• 2010

• Restorative Dentistry and Endodontics
• /
• v.13 no.1
• /
• pp.23-38
• /
• 1988

In order to investigate the material formed by application of fluoride on human dentin, exposed dentin of tooth cervix and sound dentin powder was treated by several fluoride solutions. The former was observed by scanning electron microscope and the latter was analysed by x-ray diffractometer and infrared spectrophotometer. The results obtained were as follows: 1. Application with NaF, $SnF_2$ and $Na_2PO_3F$ on exposed dentin of tooth cervix formed mineralized materials covered. 2. The amount of mineralized materials increased with time intervals of applying the fluorides. 3. The density of mineralized materials was highest in $Na_2PO_3F$ treatment group, and NaF treatment group was higher than $SnF_2$ treatment group. 4. $SnF_2$ remained in covering of mineralized materials. 5. Application with NaF and $Na_2PO_3F$ formed mineralized materials characterized apatitic crystals. 6. The crystallinity of mineralized materials was higher prominently in $Na_2PO_3F$ treatment group.

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.449-457
• /
• 2022

Halide perovskites are emerging materials for next-generation display applications, thanks to their narrow emission linewidth and band gap tunability, capable of covering the entire range of visible light. Despite their short period of research, perovskite light emitting diodes (PeLEDs) have shown rapid progress in device external quantum efficiency (EQE) in the near-infrared (NIR), red, and green emission wavelengths, and the record EQE has exceeded over 20 %. However there has been limited progress with blue emission compared to the red and green counterparts. In this review, the current status and challenges of blue PeLEDs are introduced, and strategies to produce spectrally stable blue PeLEDs are discussed. The strategies include 1) a mixed halide system in the form of 3-dimensional (3D) perovskites, 2) colloidal perovskite nanocrystals and 3) low dimensional perovskites, known as quasi-2D perovskites. In the mixed halide system, previous reports based on the compositional engineering of 3D perovskites to reduce spectral instability (i.e., halide segregation) will be discussed. Since spectral instability issue originate from the mixed halide composition in perovskites, the two other strategies are based on enlarging the band gap with a single halide composition. Finally, the prospects for each strategy are discussed, for further improvement in spectrally stable blue PeLEDs.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.211-217
• /
• 2016

In this research, the performance of surface covering technique using a white-colored bubble sheet on reducing the cracking due to the plastic, and drying shrinkages for high rise building construction were evaluated by comparing the exposed surface without any surface treatment. From the results of the experiment conducted during fall season, desired results of decreased numbers, length, maximum width, and area of cracking were obtained without a significant difference on heat of hydration and cumulative temperature. Therefore, it is considered that the surface covering technique using bubble sheet is an appropriate method for preventing plastic and drying shrinkage cracking at fall season concrete construction.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.105-109
• /
• 2011

This study is concerned with the development of the SL inorganic floor covering. First, volatile organic compounds, inorganic test profile on the SL through the flooring is environment-friendly inorganic noncombustible floor finishes the event of fire toxic gases (such as volatile organic compounds) emissions have been identified as not at all. Second, SL-breathable material, the concrete floor to prevent aging, long life, which are three levels of noise, shock-absorbing function was decreased. Third, SL economic analysis of mineral flooring terrazzo tile floors compared with the normal material. On a terrazzo tile cost 13,500 won ~ 24,500 won, but It have found that, in terms of labor SL 36,899 won ~ 38,899 won flooring mineral balance. Occurs in the total amount when compared with terrazzo tile floors and 25,399 won 3T, 5T and economical analysis concludes that the original 12,399 won.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1416-1418
• /
• 2002

In order to examine the thermal properties of the wire materials, we analyzed the shrinkage, the expansion and the form transformation, the surface structure according to the thermal deterioration temperature through the testing method for a heating shrinkage of Korean Industrial Standard(KS C 3004). For IV(600V grade polyvinyl chloride insulated wires), we measured the shrinkage and the expansion rate, analyzed the surface structure using SEM(Scanning Electron Microscope). In the result of this experiment, the shrinkage rate of IV 2.0mm covering was high in comparison with other wires. As the deterioration temperature rises gradually, the covering is molten and harden.

• Journal of the Korean Society for Heat Treatment
• /
• v.25 no.1
• /
• pp.1-5
• /
• 2012

The purpose of this study is to prepare a high strength fiberglass reinforced metal. Aluminum covering was carried out over carbon materials such as carbon fiber in order to increase their wettability to molten metals such as aluminum. A sputtering apparatus with a cylindrical target was fabricated to carry out the covering. Sputtering was caused by glow discharge between the target and the two anode plates attached to its top and bottom. As the substrate for preliminary test, a thin carbon wire was used instead of carbon fiber, and the wire was placed at the central axis of the target. Aluminium coating was formed on the whole surface of the substrate. The formation rate and structure of coating were varied by controlling the electrical potential of substrate. When the substrate was electrically isolated, coating with columnar structure was formed with a formation rate of $15{\mu}m/hr$. In case of grounded substrate, coating with amorphous structure was formed with a formation rate of $7{\mu}m/hr$.