• Agricultural and Biosystems Engineering
• /
• v.4 no.1
• /
• pp.16-21
• /
• 2003

In the agricultural field, a machine vision system has been widely used to automate most inspection processes especially in quality grading. Though machine vision system was very effective in quantifying geometrical quality factors, it had a deficiency in quantifying color information. This study was conducted to evaluate color of beef using machine vision system. Though measuring color of a beef using machine vision system had an advantage of covering whole lean tissue area at a time compared to a colorimeter, it revealed the problem of sensitivity depending on the system components such as types of camera, lighting conditions, and so on. The effect of color balancing control of a camera was investigated and multi-layer BP neural network based color calibration process was developed. Color calibration network model was trained using reference color patches and showed the high correlation with L*a*b* coordinates of a colorimeter. The proposed calibration process showed the successful adaptability to various measurement environments such as different types of cameras and light sources. Compared results with the proposed calibration process and MLR based calibration were also presented. Color calibration network was also successfully applied to measure the color of the beef. However, it was suggested that reflectance properties of reference materials for calibration and test materials should be considered to achieve more accurate color measurement.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.126-129
• /
• 2006

The phosphate coating on the $(Fe_{0.97}Cr_{0.03})_{76}(Si_{0.5}B_{0.5})_{22}C_2$ amorphous powders with an average size of 10 ${\mu}m$ in diameter has been carried out in aqueous 1.0-2.0 wt% $H_3PO_4$ solutions, and the consolidation behavior and magnetic properties of their compressed powder cores has been investigated. The phosphate coating could provide efficient electrical insulation between amorphous powders and improved consolidation ability at room temperature. Especially when the powders were treated in more concentrated phosphoric acid solution, enhanced phosphate covering and higher frequency/dc-bias stability were achieved. The powder cores phosphate-coated in 2.0 wt% $H_3PO_4$ solution exhibited constant permeability of 21 up to 10 MHz, 110 of the quality factor at 0.9 MHz, 610 mW/cm3 core loss at 100 kHz/0.1 T and 89 of percent permeability at 100 kHz.

• The Research Journal of the Costume Culture
• /
• v.16 no.2
• /
• pp.249-262
• /
• 2008

The purpose of this study is to contemplate evening dress in contemporary fashion, thereby to analyze aesthetic characteristics of evening dress. For such purposes, this thesis first provides the historical survey of evening dresses, and to conduct a case study of survey of fashion photographs covering $pr{\hat{e}}t-{\acute{a}}t$-porter design products from 2000 to 2007 presented by Valentine. Based upon the historical survey, there are five representative styles in evening dress. Flapper chic looks could be characterized by frequent usage of sleeveless straight silhouette with long or mini hemlines, expressing sensuality, luxury, and ethnicity. Satin Siren looks were characterized by bias-cut, slim, long silhouette, expressing sensuality and luxury. Feminine Ideal looks were characterized by hourglass silhouette and decolltage with feminine details such as bow, pleats and frills, expressing historicism, luxury and sensuality. Freedom and fantasy looks were characterized by ethnic details or modern silhouette with transparent, printed materials, expressing ethnicity, sensuality, and luxury. Finally, postmodern glamourous looks were characterized by body-conscious silhouette with transparent, shiny, or stretch materials, expressing sensuality, experimentalism and luxury.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.261-264
• /
• 2004

Impact sounds, such as those created by footsteps, the dropping of an object or the moving of furniture, can be a source of great annoyance in residential buildings. The character and level of impact noise generated depends on the object striking the floor, on the basic structure of the floor, and on the floor covering. This study base on the evaluate of isolation performance of impact sound according to the installation of ceiling and wall. In this test, we measured the reduction of impact sound in the case of inserting absorption materials, increasing of the thickness of air layer and using anti-vibration rubber in ceiling, install of absorption materials in wall. The results of this study show that treatment of ceiling and wall have some reduction of the light weight impact sound and heavy weight impact sound.

• Archives of Plastic Surgery
• /
• v.43 no.3
• /
• pp.229-236
• /
• 2016

Recently, diagnoses of and operations for medial orbital blowout fracture have increased because of the development of imaging technology. In this article, the authors review the literature, and overview the accumulated knowledge about the orbital anatomy, fracture mechanisms, surgical approaches, reconstruction materials, and surgical methods. In terms of surgical approaches, transcaruncular, transcutaneous, and transnasal endoscopic approaches are discussed. Reconstruction methods including onlay covering, inlay implantation, and repositioning methods are also discussed. Consideration and understanding of these should lead to more optimal outcomes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2483-2486
• /
• 2013

Background: The aim of this study was to determine the epidemiology of tobacco smoking, toombak dipping and alcohol consumption as risk factors for cancer in the adult population of the northern state of Sudan. Materials and Methods: A cross-sectional survey from March to April 2010, covering 963 adults, was performed. Result: Only 207 had responded, and the male female prevalence was 20.8% and 0.73%. Out of 207 respondents, 29.5% had smoked tobacco in their lifetime, 38% were toombak dippers, while 14% were consumers of alcoholic beverages. Conclusions: The prevalence of toombak dipping was higher than tobacco smoking among the adult population in the northern state of Sudan. Female participation in tobacco and alcohol related studies was found to suffer from major obstacles since these habits are considered as social stigma. Appreciation of the full impact of smoking on population health will definitely make a major contribution to improvement of the poor public health situation in Sudan.

• Imaging Science in Dentistry
• /
• v.43 no.2
• /
• pp.99-104
• /
• 2013

Purpose: This study was performed to investigate the clinical usefulness of teleradiology in general dental practice. Materials and Methods: Two hundred and seventy five cases were submitted for inquiry to the case presentation board of the website of The Korean Academy of Oral and Maxillofacial Radiology for a 5 year periods. The diagnosis results of those cases were analyzed according to the disease classification, the correlation with the patient's chief complaint, the necessity of additional examinations or treatments, the image modalities, and the number of dentists inquiring. Results: Differential diagnoses of normal anatomic structures were the most frequently submitted cases, covering 15.6% of all cases. Among 275 cases, 164 cases required no additional treatments or examinations. Panoramic radiographs were the most frequently submitted images, accounting for 248 inquiries. The 275 cases were submitted by 96 dentists. Fifty-two dentists wrote one inquiry, and 44 inquired 2 or more times. The average inquiry number of the latter group was 5.0 cases. Conclusion: A teleradiology system in general dental practice could be helpful in the differential diagnosis of common lesions and reduce unnecessary costs.

• Analytical Science and Technology
• /
• v.27 no.3
• /
• pp.121-139
• /
• 2014

In this review, we will discuss aptamer technologies including in vitro selection, signal transduction mechanisms, and designing aptamers and aptazyme for label-free biosensors and catalysts. Dye-displacement, a typical label-less method, is described here which allows avoiding relatively complex labeling steps and extending this application to any aptamers without specific conformational changes, in a more simple, sensitive and cost effective way. We will also describe most recent and advanced technologies of signaling aptamer and aptazyme for the various analytical and clinical applications. Quantum dot biosensor (QDB) is explained in detail covering designing and adaptations for multiplexed protein detection. Application to aptamer array utilizing self-assembled signaling aptamer DNA tile and the novel methods that can directly select smart aptamer or aptazyme experimentally and computationally will also be finally discussed, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1749-1751
• /
• 1998

Close to high power radio/radar transmitters there is a possibility that sparks may be occur at discontinuities in metallic structures. If these structures are in an area in which a flammable mixture may be present, there is a possibility that a fire or explosion may be caused by the sparking. A number of assessment procedures for quantification of the hazard have been produced. This paper reviews the bases of the British Standard covering ignition hazards by radio-frequency radiation and presents some ignition test apparatus to access these hazards.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1994.05a
• /
• pp.85-87
• /
• 1994

최근 농산물의 수입개방과 함께 농업의 국제경쟁력을 키우는 문제가 크게 대두되고 있고, 또한 소비자들의 고품질 농산물의 요구는 농업의 새로운 국면을 맞이하게 되었다. 이에 부응하여 시설원예분야에서는 종래의 근대적 시설재배방식에서 탈피해 각종첨단조절장치 등을 이용한 성력화, 자동화로 농산물의 국제경쟁력을 키우고 시설재배의 단지화와 생산물의 고품질화로 시설재배의 경영에 많은 도움을 주고있다. (중략)