투수성 폴리머 콘크리트의 공극에 오염물질의 침투로 내구성 및 투수성능이 저하될 수있어 각종 필터용 폴리머 모르터를 그 위에 타설한 후, 압축강도, 휨강도 및 인장접착강도의 역학적 성질과 경화수축 및 투수성능을 실험을 실시하였다. 실험결과, 투수성 콘크리트의 압축강도의 증가와 함께 투수계수는 낮아졌으며, 충진재-결합재비의 증가에 따라 강도의 증가는 현저하였다. 투수성 폴리머 콘크리트의 압축강도와 투수계수는 9.4 MPa~1.93cm/s범위로서 배합에 따른 영향이 크게 나타났다. 필터용 폴리머 모르터를 타설한 투수성 폴리머 콘크리트의 역학적 성질은 쇄석을 필터로 사용하였을 때 가장 우수하였으며, 투수성 폴리머 콘크리트의 경화수축은 필터와 베이스 콘크리트 사이의 접착력에 영향을 크게 받음을 알 수 있었다. 본 연구결과, 투수성 폴리머 콘크리트의 각 배합조건에 따른 경제성과 성능면에서 균형을 이룰 수 있는 최적배합비를 제안할 수 있었으며 투수성 폴리머 콘크리트의 제작과응용면에 필요한 기초자료를 얻을 수 있었다.
Cities will soon host two third of the population worldwide, and already today 80% of the world energy is used in the 20 largest cities. Urban areas create 80% of the greenhouse gas emission, so we should take care that urban areas are smart and sustainable as implementations have especially here the greatest impact. Smart Cities (SC) or Smart Sustainable Cities (SSC) are the actual concepts that describe methodologies how cities can handle the high density of citizens, efficiency of energy use, better quality of life indicators, high attractiveness for foreign investments, high attractiveness for people from abroad and many other critical improvements in a shifting environment. But if we talk about Entrepreneurship Ecosystem and Innovation, we do not see a lot of literature covering this topic within those SC/SSC concepts. It seems that 'Smart' implies that all is embedded, or isn't it properly covered as brick stone of SC/SSC concepts, as they are handled in another 'responsibility silo', meaning that the policy implementation of a Science and Technology Park (STP) is handled in another governing body than SC/SSC developments. If this is true, we will obviously miss a lot of synergy effects and economies of scale effects. Effects that we could have in case we stop the siloed approaches of STPs by following a more holistic concept of a Smart Sustainable City, covering also a continuous flow of innovation into the city, without necessarily always depend on large corporate SSC solutions. We try to argue that every SSC should integrate SP/STP concepts or better their features and services into their methodology. The very limited interconnectivity between these concepts within the governance models limits opportunities and performance in both systems. Redesigning the architecture of the governance models and accepting that we have to design a system-of-systems would support the possible technology flow for smart city technologies, it could support testbed functionalities and the public-private partnership approach with embedded business models. The challenge is of course in complex governance and integration, as we often face siloed approaches. But real SSC are smart as they are connecting all those unconnected siloes of stakeholders and technologies that are not yet interoperable. We should not necessarily follow anymore old greenfield approaches neither in SSCs nor in SP and STP concepts from the '80s that don't fit anymore, being replaced by holistic sustainability concepts that we have to implement in any new or revised SSC concepts. There are new demands for each SP/STP being in or close to an SC/SCC as they have a continuous demand for feeding the technology base and the application layer and should also act as testbeds. In our understanding, a big part of STP inputs and outputs are still needed, but in a revised and extended format. We know that most of the SC/STP studies claim the impact is still far from understood and often debated, therefore we must transform the concepts where SC/STPs are not own 'cities', but where they act as technology source and testbed for industry and new SSC business models, being part of the SC/STP concept and governance from the beginning.
A comparative study was conducted to evaluate the relationship of investing medium to the amount of vertical occlusal changes and to the differences of surface smoothness during denture construction. Three groups of 20 dentures, 30 sets of upper and lower were fabricated of conventional heatcuring acrylic denture base resin, using silicone-gypsum molding techniques, with or without covering the occlusal surfaces of the teeth by artificial stone and all-gypsum molding techniques. The distance between the two reference points indented by 1/2 round bur on the upper and lower frontal surfaces of each articulator were measured and recorded before processing and again after processing and remounting of each denture on the articulator. The differences between the two recordings indicated the amount of vertical opening during denture processing. The difference of surface smoothness were investigated and determined by 3 observers continual comparing of the two randomly selected dentures with each other, which were seperately selected as pairs from the different two groups of 20. The results obtained were as follows: 1. During resin processing no statistically significant differences of the amount of vertical occlusal changes were detected between any of the two groups of two silicone-gypsum and one allgypsum molding techniques, although the amount of vertical opening was somewhat increased when silicone-gypsum molding technique was used. 2. Surface smoothness of the processed denture was makedly by increased when silicone-gypsum molding technique was used.
On April 28th of 2006, a set of Buddha's reliquary was excavated from the pagoda in n Nacsan Temple. According to the record, the relics were put in the pagoda in the 18th year of King SookJong in the Chosun Dynasty (1692). The present paper examines ten pieces of wrapping clothes covering reliquary found in the pagoda. They are especially precious data in the history of textiles because they were blocked off from outside and was preserved in good condition with vivid colors still remaining after more than 300 years. Of the ten pieces of wrapping cloth, five were double-layered and the other five were single-layered. They include 15 pieces of silk fabric but, excluding repeated use of the same silk fabric, the total of 11 pieces of silk fabric were examined. All 11 kinds of silk fabric were patterned, 9 of which were Satin and the other 2 were Twill. Of the 9 Satin pieces, 8 pieces were 5-end satin which had the ground of 5-end warp satin with the figure of 5-end weft satin. The remaining 1 Satin piece were more splendid with prominent figures by using warp and weft of different colors. The 2 Twill pieces used twill weave-the ground was 3-end warp twill and the figures were 5-end weft twill. Both of the Twill pieces were weaved with character patterns, partly using wrapped gold thread as supplementary weft. The patterns of 11 pieces of silk fabric include flower, dragon/phoenix, cloud, and geometric patterns. Five were flower patterns, three were dragon/phoenix patterns, two were geometric pattern, and one was cloud pattern. In addition, various treasure patterns, character patterns were utilized as supplementary patterns. The flower and phoenix patterns reflect characteristics of the textiles of the 17th century whereas check pattern and cloud pattern were very unique.
오늘날 각종폐기물 발생량이 증가되는데, 본 실험 연구에서는 미장 및 벽돌 제조용의 배합비를 적용하여 시멘트 모르타르의 하수슬러지 소각재의 폐기물을 이용하여 활용가능성에 대한 기초적 자료를 제시함이 본 연구의 목적이다. 실험에 따른 결과를 종합해 볼 때, 배합비 1:2의 하수슬러지 10%와 황토의 소량 첨가율과 배합비 1:7의 경우 압축강도가 다소 작지만 석분과 하수슬러지 10% ~ 20%를 첨가하면 하수슬러지를 재순환 할 수 있으며, 환경 친화적인 재료의 기초적 자료로 활용 가능할 것으로 판단된다.
It is very hard to find out Tongbanga-millhouse installed nearby a streamlet to use water with Tongbanga(a kind of water-mill) to polish cereals by pounding like a visage of its old days. It plays an important part in folkloric, architectural and educational aspects. The purpose of this study is to analyse the architectural features of Tongbanga and millhouse itself so that to find the way how to build and fabricate the materials and frame members. Therefore this study has been focused on the composition principle and fabrication method of Tongbanga-millhouse on the side of architecture. The fabrication methods of its house in accordance with regular sequences are as follows. ${\cdot}$ Firstly the decision of location of Tongbanga-millhouse and Hwak(a big mortar made of stone). ${\cdot}$ Slantly three rafter installation at an angle of $50^{\circ}$ to err on the safe side and then slantly fifteen rafter installation making a circular cone shape. ${\cdot}$ Installation of twigs to be circles from bottom to top. ${\cdot}$ Manifoldly covering of trunks peeling the barks from flax plants. ${\cdot}$ Threefoldly thatching with upside barks of oak trees. ${\cdot}$ Placing woods alike rafter on the bark thatches as a weight not to fly away by wind. ${\cdot}$ Binding woods alike rafter with vines of arrowroots to maintain the proper place. The decayed Tongbanga-millhouse by means of upper ways was restored out of all recognition.
본 연구는 환경유해시설인 광물찌꺼기 적치장의 효과적 유지관리를 위한 모니터링 방안을 수립하기 위해 수행하였다. 광물찌꺼기 적치장 유지관리를 위한 모니터링은 세분된 점검항목 및 평가항목의 선정을 통해 상세한 조사가 필요하며, 조사결과를 효과적으로 활용하기 위하여 불량정도 및 그 진행성 여부에 대한 평가가 필요하다. 따라서 모니터링 항목을 옹벽구조물(콘크리트 옹벽, 석축, 돌망태) 및 일반시설물(차수층, 복토층, 사면, 광물찌꺼기, 우수배제시설, 침출수, 식생)로 점검항목을 세분하고, 각 항목별 모니터링 결과에 대한 상태평가를 수행하여 등급 및 점수화를 통해 체계적인 유지관리가 될 수 있도록 모니터링 개선안을 제안하였다. 개선안에 따른 현장 적용성 평가 결과, 기존 모니터링에 비해 최대 16건(우수배제시설)의 하자 발생 건수가 추가로 확인되는 등 기존 모니터링에 비해 세부적인 평가가 가능한 것으로 확인되었으며, 등급에 따른 광물찌꺼기 적치장별 종합점수는 금장광산이 89.3점으로 가장 양호하고 거풍광산이 22.2점, 화천광산이 27.8점으로 가장 불량한 것으로 확인되었다. 이와 같이 개선안을 적용할 경우, 보다 상세한 모니터링을 수행할 수 있고 각각의 항목에 대한 정량적인 평가가 가능하다. 이러한 정량적 평가는 향후 광물찌꺼기 적치장의 보수 우선순위를 결정하고 중점관리항목 선정, 유지보수 계획수립에 활용될 수 있을 것으로 판단된다.
본 연구는 매장문화재 보존형 역사공원의 설계 여건으로서 관련 법규와 제도를 고찰한 후, 비지정문화재를 보존조치한 능곡선사유적공원, 안산신길역사공원, 용죽역사공원에 대한 사례 연구를 진행하여 설계 양상을 도출하였다. 연구의 결과는 다음과 같다. 첫째, 역사공원 관련 법규에 따르면 유적지의 보존과 활용을 동시에 만족시켜야 하고, 역사관련시설공간, 광장, 휴게공간, 운동공간, 교육문화공간, 편익공간을 도입할 수 있다. 둘째, 매장문화재의 보존만 강조한 공간구성과 동선 체계에 의해서 유구보존공간과 기능적 공간들이 격리되고, 주변 토지이용을 고려한 이용행태를 수용하지 않아서 역사공원의 효용성이 적었다. 셋째, 건축적 방식의 노출 현지보존, 움집 재현, 복토 현지보존 후 철쭉이나 석재로 수혈주거지 위치를 표시하는 소극적 유구보존방식과 관람 위주의 활용으로 인하여 역사공원의 정체성이 약했다. 넷째, 이용자 접근을 막는 울타리가 유구의 체험을 방해하고, 노출된 유구의 상부를 보호하는 수직 구조물이 역사공원의 경관을 압도하였다. 다섯째, 매장문화재 정보를 전달하는 안내판에 전문용어 위주의 텍스트와 발굴 사진만 제시하여 유구 공간을 이해하기 어려웠다.
Samples from newly exposed outcrop of sedimentary layers forming Jeongdongjin coastal terrace in Gangreung area are collected and analyzed to find the sedimentary environment. The site are located at the gentle hillslope of the terrace surface area. The height of the outcrop is about 8m and the altitude of it's highest part is 68~73m MSL. The lowest part of this out crop is the partly consolidated sand layer with gravel veneer within it. It is found that this part is not in-situ weathered sand stone through the OSL method. This sand layer is overlain by the gravel layer with sand matrix. The shapes of the gravels from this part are mainly 'platy', 'elongated', and 'bladed' by the index of Sneed and Folk(1958). In addition, mean roundness is not so high. It is sceptical to regard this part as marine sediments which are continuously exposed to erosional processes. The boundary between the lowest sand layer and gravel layer showing the abrupt change in forming material without any mixture or transitional zone, so gravels are seemed to deposited after some degree of consolidation of the lowest sand layer. In addition, the hight of the boundary between layers are changed by the place, so the surface of the partly consolidated sand layer is not flat and has irregularity on topography when it buried by gravels. Main part of this out crop is the poorly sorted coarse gravel(22.4mm) with sand matrix($1.36{\phi}$) layer with at least 2m thick covering the relatively fine gravels discussed above. Over 20% of particles have 'very platy', 'very elongated' and 'very bladed' shape and only less than 5% of particles have 'compact' shape, So this particles are also very hard to be regard as marine gravels which are abraded by marine processes. It can be concluded that this gravel layer formed by fluvial processes rather than coastal processes base on the form of the clast and sedimentary structure. The gravel layer is covered by fine($3{\sim}4{\phi}$) material layers of psudo-gleization which showing inter-bedding of red and white layers. Chemical composition of matrix and other fine materials should be analyzed in further studies. It is attempted to fine the burial ages of the sediment using OSL method, but failed by the saturation. So it can be assumed that these sediments have be buried over 120ka.
본 글에서는 강원도 영월에 소재한 조선시대 22대왕인 정조대왕(正祖大王) 태실에 대해서 살펴보고자 한다. 장태문화(藏胎文化)는 신라시대에 시작되어 고려시대 왕실, 조선시대 왕실까지 오랜 기간 행해진 우리나라 고유의 왕실의식이라 할 수 있다. 전국에서 현재까지 확인된 태봉의 수만 해도 약 300여 곳으로 대부분 조선시대 왕실자손들의 태봉이다. 조선시대 역대 왕들의 태실은 일제강점시기에 대부분 훼손되었고, 그중 일부만 현재 국내 각 지역에서 복원되어 관리되고 있다. 정조대왕 태실은 국내 현존하는 태실 중에 석물을 포함한 봉안유물과 문헌자료가 완벽하게 세트를 갖춘 상태로 잘 보존된 대표적인 태실이라 할 수 있다. 이에 필자는 정조대왕 태실을 종합적으로 규명하기 위해 우선 조선왕조실록(朝鮮王朝實錄), 정종대왕태실가봉의궤(正宗大王胎室加封儀軌), 지방사료 등에서 정조태실 조성과 관련된 문헌자료를 찾아 정리해 보았으며, 태봉의 풍수지리적 위치와 현황, 태실석물의 각 부재에 대한 세부 양식 검토, 봉안된 유물의 특징 등을 살펴보는 데 중점을 두었다. 이러한 자료는 추후 태실유적에 대한 연구와 정비 복원 등의 기초 자료로 중요하게 활용될 것으로 생각된다. 그동안 태실유적은 학계에 그다지 주목받지 못했던 분야였으나, 최근 들어 태실유적에 대한 고고학적인 발굴조사와 미술사적인 접근이 이뤄져 관심을 받기 시작했다. 앞으로 태실유적은 문헌사, 고고학, 미술사 등 다방면에 걸친 분야에서 종합적으로 검토된다면 학술적 연구 성과를 기대할 수 있을 것으로 본다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.