An Analysis on the Properties of Cement Mortar using Sewage Sludge Incineration Ash

하수슬러지 소각재를 이용한 시멘트 모르타르의 특성분석

This is an experimental research in order to judge the applicability of sewage sludge incineration ash having applied the mixing proportion needed to manufacture bricks and to do plaster work with addition of hwangtoh and slaked lime as a part of the methods for utilizing the wastes produced from sewage sludge incineration ash. Based on the results from experiment and analysis, it is judged that, in case of mixing proportion of 1:2 for the purpose of plastering and masonry work, the cement mortar produced by using a 10% addition ratio of sewage sludge incineration ash with mixture of hwangtoh covering all range of addition ratio, and also the cement mortar produced by using a 20% of sewage sludge incineration ash together with 0% and 10% addition ratio of hwangtoh, was possible to be applied to the practical use. In case of mixing proportion of 1:7 for manufacture of bricks and blocks, if such brick and block products are produced with 10% and 20% addition ratio of sewage sludge incineration ash having added aggregate fines or stone dust that has been actually used in brick and block manufacturing, it is judged that these bricks and blocks could be practically used in the job sites, although strength development is a little bit lower.

오늘날 각종폐기물 발생량이 증가되는데, 본 실험 연구에서는 미장 및 벽돌 제조용의 배합비를 적용하여 시멘트 모르타르의 하수슬러지 소각재의 폐기물을 이용하여 활용가능성에 대한 기초적 자료를 제시함이 본 연구의 목적이다. 실험에 따른 결과를 종합해 볼 때, 배합비 1:2의 하수슬러지 10%와 황토의 소량 첨가율과 배합비 1:7의 경우 압축강도가 다소 작지만 석분과 하수슬러지 10% ~ 20%를 첨가하면 하수슬러지를 재순환 할 수 있으며, 환경 친화적인 재료의 기초적 자료로 활용 가능할 것으로 판단된다.