• Journal of Information Processing Systems
• /
• v.5 no.4
• /
• pp.207-220
• /
• 2009

A large number of phone calls and data services will take place in indoor environments. In Long Term Evolution (LTE), femtocell, as a home base station for indoor coverage extension and wideband data service, has recently gained significant interests from operators and consumers. Since femtocell is frequently turned on and off by a personal owner, not by a network operator, one of the key issues is that femtocell should be identified autonomously without system information to support handover from macrocell to femtocell. In this paper, we propose a dynamic reservation scheme of Physical Cell Identities (PCI) for 3GPP LTE femtocell systems. There are several reserving types, and each type reserves a different number of PCIs for femtocell. The transition among the types depends on the deployed number of femtocells, or the number of PCI confusion events. Accordingly, flexible use of PCIs can decrease PCI confusion. This reduces searching time for femtocell, and it is helpful for the quick handover from macrocell to femtocell. Simulation results show that our proposed scheme reduces average delay for identifying detected cells, and increases network capacity within equal delay constraints.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2530-2547
• /
• 2015

In the recent years, femtocell technology has received a considerable attention due to the ability to provide an efficient indoor wireless coverage as well as enhanced capacity. However, under the spectrum sharing between femtocell user equipment (FUEs) and the owner of spectrum macrocell user equipment (MUEs), both may experience higher uplink interference to each other. This paper proposes a novel distributed power control algorithm for the interference management in two-tier femtocell networks. Due to the assignment of licensed radio frequency to the outdoor macrocell users, the access priority of MUEs should be higher than FUEs. In addition, the quality of service (QoS) of MUEs that is expressed in the target signal-to-interference-plus-noise ratio (SINR) must always be achieved. On the other hand, we consider an efficient QoS provisioning cost function for the low-tier FUEs. The proposed algorithm requires only local information and converges even in cases where the frontiers of available power serve the target SINRs impossible. The advantage of the algorithm is the ability to implement in a distributed manner. Simulation results show that the proposed algorithm based on our cost function provides effective resource allocation and substantial power saving as compared to the traditional algorithms.

• Journal of Computing Science and Engineering
• /
• v.9 no.4
• /
• pp.163-176
• /
• 2015

Self-organization of distributed wireless sensor nodes is a critical issue in wireless sensor networks (WSNs), since each sensor node has limited energy, bandwidth, and scalability. These issues prevent sensor nodes from actively collaborating with the other types of sensor nodes deployed in a typical heterogeneous and somewhat hostile environment. The automated self-organization of a WSN becomes more challenging as the number of sensor nodes increases in the network. In this paper, we propose a dynamic self-organized architecture that combines tree topology with a drawn-grid algorithm to automate the self-organization process for WSNs. In order to make our proposed architecture scalable, we assume that all participating active sensor nodes are unaware of their primary locations. In particular, this paper presents two algorithms called active-tree and drawn-grid. The proposed active-tree algorithm uses a tree topology to assign node IDs and define different roles to each participating sensor node. On the other hand, the drawn-grid algorithm divides the sensor nodes into cells with respect to the radio coverage area and the specific roles assigned by the active-tree algorithm. Thus, both proposed algorithms collaborate with each other to automate the self-organizing process for WSNs. The numerical and simulation results demonstrate that the proposed dynamic architecture performs much better than a static architecture in terms of the self-organization of wireless sensor nodes and energy consumption.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.244-249
• /
• 2015

High-altitude electromagnetic pulse (HEMP) is generated from a nuclear burst at high altitudes above the Earth, the electromagnetic fields reach the ground nearly simultaneously with regard to the operation time of systems. The aim of this analysis is to inquire about HEMP characteristics and to analyze about effect in orthogonal frequency division multiplexing (OFDM) system. Specifically, HEMP characteristics are classified field sources, spatial coverage, time domain behavior, frequency spectrum and field intensities in this study. Bits error rate (BER) of the receiver with the software simulation is confirmed for the HEMP effect. Q-factor made a difference about interference duration by transfer characteristics of system. When Q factor is smaller, the recovery time from HEMP interference is short. To the contrary, if the Q factor is larger, the recovery duration is lasted longer by 300-600%.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.20 no.3
• /
• pp.171-180
• /
• 2016

Earthquake event keeps increasing every year, and the recent cases of earthquake hazards invoke the necessity of seismic study in Korea, as geotechnical earthquake hazards, such as strong ground motion, liquefaction and landslides, are a significant threat to structures in industrial hub areas including coastal facilities. In this study, systemized framework of integrated assessment of earthquake-induced geotechnical hazard was established using advanced geospatial database. And a visible simulation of the framework was specifically conducted at two coastal facility areas in Incheon. First, the geospatial-grid information in the 3D domain were constructed with geostatistical interpolation method composed of multiple geospatial coverage mapping and 3D integration of geo-layer construction considering spatial outliers and geotechnical uncertainty. Second, the behavior of site-specific seismic responses were assessed by incorporating the depth to bedrock, mean shear wave velocity of the upper 30 m, and characteristic site period based on the geospatial-grid. Third, the normalized correlations between rock-outcrop accelerations and the maximum accelerations of each grid were determined considering the site-specific seismic response characteristics. Fourth, the potential damage due to liquefaction was estimated by combining the geospatial-grid and accelerations correlation grid based on the simplified liquefaction potential index evaluation method.

• Journal of information and communication convergence engineering
• /
• v.16 no.3
• /
• pp.135-141
• /
• 2018

Wireless sensor networks (WSN) are composed of a large number of sensor nodes. Battery-powered sensor nodes have limited coverage; therefore, it is more efficient to transmit data via multi-hop communication. The network lifetime is a crucial issue in WSNs and the multi-hop routing protocol should be designed to prolong the network lifetime. Prolonging the network lifetime can be achieved by minimizing the power consumed by the nodes, as well as by balancing the power consumption among the nodes. A power imbalance can reduce the network lifetime even if several nodes have sufficient (battery) power. In this paper, we propose a routing protocol that prolongs the network lifetime by balancing the power consumption among the nodes. To improve the balance of power consumption and improve the network lifetime, the proposed routing scheme adaptively controls the transmission range using a power control according to the residual power in the nodes. We developed a routing simulator to evaluate the performance of the proposed routing protocol. The simulation results show that the proposed routing scheme increases power balancing and improves the network lifetime.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.30-38
• /
• 2003

UDP library of Verilog HDL has been used for simulation of digital systems. But it takes a lot of time and efforts to generate a gate-level library equivalent to the UDP library manually due to the characteristic of UDP that does not support synthesis. It is indispensable to generate equivalent gate-level model in testing the digital systems because fault coverage can be reduced without the equivalent gate-level models. So, it is needed to automate the process of generating the equivalent gate-level models. An algorithm to solve this problem has been proposed, but it is unnecessarily complex and time-consuming. This paper suggests a new improved algorithm to implement the conversion to gate-level models, which exploits the characteristic of UDP Experimental results are demonstrated to show the effectiveness of the new algorithm.

• ETRI Journal
• /
• v.42 no.3
• /
• pp.351-365
• /
• 2020

Directional sensor networks (DSNs) can significantly improve the performance of a network by employing energy efficient communication protocols. Neighbor discovery is a vital part of medium access control (MAC) and routing protocol, which influences the establishment of communication between neighboring nodes. Neighbor discovery is a challenging task in DSNs due to the limited coverage provided by directional antennas. Furthermore, in these networks, communication can only take place when the beams of the directional antennas are pointed toward each other. In this article, we propose a novel multiple token-based neighbor discovery (MuND) protocol, in which multiple tokens are transmitted based on an area exploration algorithm. The performance of the protocol is evaluated using the Cooja simulator. The simulation results reveal that the proposed MuND protocol achieves lower neighbor discovery latency, with a 100% neighbor discovery ratio, and has a relatively low communication overhead and low energy consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Journal of IKEEE
• /
• v.11 no.3
• /
• pp.100-107
• /
• 2007

One of the fundamental problems in wireless sensor networks is the efficient deployment of sensor nodes. The Fuzzy C-Means(FCM) clustering algorithm is proposed to determine the optimum location and minimum number of sensor nodes for the specific application space. We performed a simulation and a experiment using two rectangular and one L shape area. We found the minimum number of sensor nodes for the complete coverage of modeled area, and discovered the optimum location of each nodes. The real deploy experiment using sensor nodes shows the 94.6%, 92.2% and 95.7% error free communication rate respectively.