• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.7
• /
• pp.1-8
• /
• 2019

The primary purposes of this study are to understand a fundamental effects of electro-deposition on reinforcing steel in saturated Ca(OH)2 electrolyte, and evaluate the corrosion rates of rebars under cyclic 3wt.%NaCl immersion and dry corrosion environment. The three cement mortar specimens with cover thickness 5, 10 and 30mm, were prepared in the experiment. To monitor the corrosion rates of rebars in mortar, the three cement mortar specimens were exposed to 110 wet-drying cycles(8-hour-immersion in 3wt.%NaCl and 16-hour-drying in a room temperature) in the laboratory. During the wet-dry cycles, the polarization resistance, Rp, and solution resistance, Rs, were continuously measured. The instantaneous corrosion rates of rebars on the effect of electro-depositing with sat. Ca(OH)2 electrolyte were estimated from obtained R-1p and degrees of wetness were estimated from Rs values. From the experimental results, the corrosion rates of rebars were greatly accelerated by wet/dry cycles. During the mortars exposed to drying condition, the large increases in the corrosion rates were showed at all rebar surfaces in three mortar specimen, attributed from the accelerated reduction rates of dissolved oxygen in drying process. However, the corrosion rates on rebar surface electrochemically deposited with sat. Ca(OH)2 electrolyte showed the clear decreases, caused by calcium deposits in the porous rust layer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.41 no.1
• /
• pp.44-49
• /
• 2008

Sufficient inorganic nitrogen supply for crop growth is crucial for economically sustainable organic farming. The effects of an application of cover crop biomass on crop growth, nitrogen utilization and carbohydrate composition were investigated during early stage. Short-term changes in soil nitrogen after incorporating fresh hairy vetch and rye shoots were measured. The inorganic nitrogen from cover crops reached the peak at 15 ($NH_4-N$) and 24 ($NO_3-N$) days after incorporation, and then decreased rapidly. The highest concentration of soil nitrate showed at 27 days of incorporation in hairy vetch and at 18 days in rye, and three fold differences exhibited between two treatments. Crop growth under hairy vetch or rye incorporation significantly differed. At 20 DAT, dry matter production in NPK and hairy vetch was about two fold greater than that in rye. Difference in decomposing rates of hairy vetch and rye had also influence on nitrogen status in leaves and roots of pepper plants. Total nitrogen was greater in NPK and hairy vetch than in rye until 20 DAT, whereas inorganic nitrogen (nitrate and nitrite) concentration was higher in rye. Temporal changes in soluble sugars and starch in pepper plants among treatments were similar, although difference in the amount existed. It was suggested that hairy vetch as an alternative nitrogen source promoted crop growth and mineral utilization during early growth stage, whereas an obvious effect in rye was not found.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.94-101
• /
• 2012

This paper proposes an improved image steganalysis scheme to raise the detection rate of stego images out of cover images. To improve the detection rate of stego image in the steganalysis, tiny variation caused by data hiding should be amplified. For this, we extract feature vectors of cover image and stego image by two steps. First, we separate image into upper 4 bit subimage and lower 4 bit subimage. As a result, stego noise is expanded more than two times. We decompose separated subimages into twelve subbands by applying 3-level Haar wavelet transform and calculate co-occurrence probabilities of two different subbands in the same scale. Since co-occurrence probability of the two wavelet subbands is affected by data hiding, it can be used as a feature to differentiate cover images and stego images. The extracted feature vectors are used as the input to the multilayer perceptron(MLP) classifier to distinguish between cover and stego images. We test the performance of the proposed scheme over various embedding rates by the LSB, S-tool, COX's SS, and F5 embedding method. The proposed scheme outperforms the previous schemes in detection rate to existence of hidden message as well as exactness of discrimination.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.4
• /
• pp.922-937
• /
• 2024

Maritime activities are on the rise, there is a growing demand for high-quality communication services that can cover larger areas. However, the transmission of high data rates to maritime users is challenging due to path loss from land base stations, which limits the transmission power. To overcome this challenge, researchers have been exploring the use of buoys in a marine environment as relays for communication technology. This paper proposes a simulation-based approach to investigate the impact of various beamwidths on communication performance when using a buoy as a relay. The objective is to determine the optimal beamwidth that yields the highest data rate for the target location. The approach is based on an offshore wave model where the direction of the buoy changes according to the height of the wave. The study investigates the performance of the relay in the downlink situation using receive beamforming, and the capacity at the user in the three-hop situation is verified using an amplify-and-forward (AF) relay that uses transmit beamforming to the user. The simulation results suggest that the beamwidth of the relay should be adjusted according to the wave conditions to optimize the data rate and relay position that satisfies a data rate superior to the direct path to the target position. Using a buoy as a relay can be a promising solution for enhancing maritime communications, and the simulation-based approach proposed in this paper can provide insights into how to optimize beamwidth for effective communication system design and implementation. In conclusion, the study results suggest that the use of buoys as relays for maritime communication is a feasible solution for expanding coverage and enhancing communication quality. The proposed simulation-based approach provides a useful tool for identifying relay beamwidths for achieving higher data rates in different wave conditions. These findings have significant implications for the design and deployment of communication systems in maritime environments.

• ETRI Journal
• /
• v.25 no.3
• /
• pp.171-178
• /
• 2003

To improve the detection performance of surveillance radars with polarization diversity, we developed an adaptive polarimetric processor and compared it with other polarimetric processors. We derived our adaptive polarimetric processor, called the polarization discontinuity detector (PDD), from the generalized likelihood ratio (GLR) test principle for the unspecified target component. We derived closed-form expressions of its probabilities of detection and false alarm, and compared its performance to that of the adaptive polarization canceller (APC) and Kelly's GLR processor. The PDD had a performance similar to Kelly's GLR in Gaussian clutter, and both the PDD and Kelly's GLR, which have embedded constant false alarm rates (CFARs), outperformed the APC, especially when the target polarization state was close to the clutter's polarization state. The important difference is that the PDD is much simpler than Kelly's GLR for hardware/software implementation, because the PDD does not require a costly two-parameter filter bank to cover the unknown target polarization state as Kelly's GLR does.

• Corrosion Science and Technology
• /
• v.3 no.1
• /
• pp.34-38
• /
• 2004

The corrosion of reinforcement is a very important factor on the serviceability and safety of reinforced concrete structures. The corrosion rate influences directly the cover failure time of reinforced concrete structures because the corrosion rate is used to estimate the amount of corrosion and thus expansive pressure due to corrosion. In this study, several series of experiments are performed considering the chloride concentration in artificial pore solution. The potentials are measured according to the applied current density and then corrosion current densities are obtained from the Tafel plot for various chloride concentrations. The measured corrosion rates show good correlation with those of other researchers.

• Asian Journal of Turfgrass Science
• /
• v.14 no.1
• /
• pp.251-256
• /
• 2000

The purpose of this study is to select the appropriate herbicide, which is needed to control the bentgrass in kentucky bluegrass(Poa pratensis) fairway effectively. The best control of bentgrass was observed at /$0.3mL\m^2$ of dithiopyr applied on Kentucky bluegrass. A field experiment was conducted to determine the priming effects on seed germination of Kentucky bluegrass. Ground covering rates by turfgrass were investigated under field conditions for 70 treatments by thirty days after treatment. The solid matrix priming(SMP) treatments on Kentucky bluegrass reduced the number of days requited for emergence and improved final cover ratings. Primed seeds of Kentucky bluegrass (incubated for five days at $20^{\circ}C$) resulted in most rapid germination and covering rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.361-366
• /
• 2002

The deterioration of concrete structure due to corrosion of the reinforcement has created big financial losses on the overall industries. The volume expansion of the corrosion products causes internal pressure to concrete wall around reinforcing bar. If the maximum principal stress induced by internal pressure exceeds the tensile strength of the concrete at any point of time, a crack forms at any point of material. Therefore, in terms of life assessment of concrete structure, it is very important to predict the amount of corrosion products which induces initial concrete cracking. With this objective, this paper proposes the critical amount of corrosion products at interface between reinforcement and concrete using finite element analysis. If an actual survey of corrosion rates could be made, the model might supply information for condition assessment of existing concrete structure. As the mechanical properties of corrosion product and instantaneous geometry of corroded steel are considered in the analysis, the value obtained will be more realistic.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.301-304
• /
• 2002

The EPIC model was applied to assess the environmental impacts of two contrasting tillage systems (conventional versus ridge tillage). The model was calibrated with field data and validated with another set of data. The errors between the 12-year predicted and observed means or medians were less than 10% for nearly all of the environmental indicators, with the major exception of a nearly 44% over prediction of the N surface runoff loss for Watershed 2. The predicted N leaching rates, N losses in surface runoff, and sediment loss clearly showed that EPIC was able to simulate the long-term impacts of tillage and residue cover on these processes.

• Korean Journal of Environmental Biology
• /
• v.21 no.4
• /
• pp.321-327
• /
• 2003

Differences between the principles for the radiological protection of man and the environment are compared. The derived levels of exposure for man and biota recommended by the international agencies with dose rates for chronic radiation producing effects at different levels of biological organization were given in terms of the biological effects. Cytogenetic effects on plants after an exposure to ionizing radiation at low doses alone and in combination with other factors are discussed. A wide range of experimental data were analysed and the general conclusions were extracted to cover the topics such as non-linearity of dose response, synergistic and antagonistic effects of the combined exposure of different factors, radiation-induced genomic instability, and the phenomena of radioadaptation.