[KSCI] Korea Science Citation Index Service

Experimental Study on Corrosion Rate in Concrete

Jang, BongSeok (Dam Safety Research Center, Korea Institute of Water and Environment)
Oh, ByungHwan (Department of Civil Engineering. Seoul National Univ.)

Publication Information

Corrosion Science and Technology / v.3, no.1, 2004 , pp. 34-38 More about this Journal

Abstract

The corrosion of reinforcement is a very important factor on the serviceability and safety of reinforced concrete structures. The corrosion rate influences directly the cover failure time of reinforced concrete structures because the corrosion rate is used to estimate the amount of corrosion and thus expansive pressure due to corrosion. In this study, several series of experiments are performed considering the chloride concentration in artificial pore solution. The potentials are measured according to the applied current density and then corrosion current densities are obtained from the Tafel plot for various chloride concentrations. The measured corrosion rates show good correlation with those of other researchers.

Keywords

corrosion rate; chloride concentration; concrete; pore solution;

Citations & Related Records

Reference

1	Z.P. Bazant, 'Physical Model for Steel Corrosion in Concrete Sea Structures: Theory,' ASCE, ST6, 1979, pp.1137-1153
2	H.M. Jennings and P.D. Tennis, 'Model for Developing Microstructures in Portland Cement Paste,' J. Am. Ceram. Soc., 77(12), 3161 (1994).
3	B.B. Hope, and A.K.C. Ip, 'Chloride Corrosion Threshold in Concrete,' ACi Materials Journal, 84(4), 306 (1987)
4	P. Lambert, and C.L. Page, 'Investigations of Reinforcement Corrosion. 2. Electrochemical Monitoring of Steel in Chloride-Contaminated Concrete,' Materials and Structures. Research and Testing (Rilem, Paris), 24, 351 (1991)
5	B.S. Jang, 'Life Time Estimation Method of Reinforced Concrete Structures Considering the Effects of Reinforcements on the Chloride Diffusion and the Nonuniform Corrosion Distribution, 'Doctoral Thesis, Seoul National University, 2001
6	G. J. Verbeck, 'Mechanism of Corrosion of Steel in Concrete,' ACI-SP49, 1975, pp.21-38
7	L. Tang, L.O. Nilsson, 'Chloride Binding Capacity and Binding Isotherms of OPC Pastes and Mortars,' Cement and Concrete Research, 23(2), 347 (1993)
8	M. Thomas, 'Chloride Thresholds in Marine Concrete,' Cement and Concrete Research, 26(4), 513 (1996)
9	S.E. Hussain, and A.S. AI-Gahtani, 'Chloride Threshold for Corrosion of Reinforcement in Concrete,' ACI Materials Journal, 94(6), 534 (1996)
10	Z.P. Bazant, 'Physical Model for Steel Corrosion in Concrete Sea Structures: Application,' ASCE, ST6,1979, pp.1155-1165
11	P. Schiessl, 'Corrosion of Steel in Concrete,'Report of Rilem Report Technical Committee 60-CSC, Rilem, Chapman & Hall, London, 1988
12	Y. Xi and Z.P. Bazant, 'Modeling Chloride Penetration in Saturated Concrete,' J. of Materials in Civil Eng., 11( 1), 58 (1999)