• 설비공학논문집
• /
• 제25권12호
• /
• pp.674-678
• /
• 2013

We present a non-invasive technique to the measure temperature distribution in nano-sized porous thin films by means of the two-color laser-induced fluorescence (2-LIF) of rhodamine B. The fluorescence induced by the green line of a mercury lamp with the makeup of optical filters was measured on two separate color bands. They can be selected for their strong difference in the temperature sensitivity of the fluorescence quantum yield. This technique allows for absolute temperature measurements by determining the relative intensities on two adequate spectral bands of the same dye. To measure temperature fields, Silica (SiO2) nanoporous structure with 1-um thickness was constructed on a cover glass, and fluorescent dye was absorbed into these porous thin films. The calibration curves of the fluorescence intensity versus temperature were measured in a temperature range of $10-60^{\circ}C$, and visualization and measurement of the temperature field were performed by taking the intensity distributions from the specimen for the temperature field.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.165-168
• /
• 2008

본 연구에서는 철근콘크리트 구조물의 보강에 이용되는 유리섬유강화 복합재료(Glass Fiber Reinforced Polymer, GFRP) 형상에 관한 연구로서 콘크리트의 피복두께 및 FRP 보강재의 형상(Plate, Box)을 실험 변수로 하여 FRP 보강 철근콘크리트 보의 거동 평가 관한 연구를 수행하였다. 이를 위하여 본 연구에서는 T. J. Teng 등이 제안한 설계식을 이용하여 보강량을 결정하였고 기존의 FRP Plate 보강재의 성능개선을 위하여 FRP Sandwich box 보강재를 설계, 적용하여 보았다. 연구의 결과 예상과 달리 FRP Plate 보강재가 Sandwich box 보강재보다 보강효과가 우수한 것으로 조사되었으며, 이는 보강재 제작상의 한계점 및 core 재료가 너무 약하여 Sandwich box 보강재의 Top Plate와 Bottom Plate가 일체화 거동을 하지 못하여 나타난 결과로 사료된다.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.295-299
• /
• 1998

페라이트 도금 방법은 진공이 불필요하며 저온(<10$0^{\circ}C$)에서 페라이트 박막을 제작할 수 있다. 이 방법으로 기판온도 8$0^{\circ}C$, 산화용액의 pH 7.1~8.8 영역에서 모두 스피넬 구조의 NixFe3-xO4 (x=0.162~0.138) 박막을 얻었다. 이들은 열처리를 하지 않았음에도 불구하고 결정성이 우수한 다결정의 박막을 얻었다. 박막의 성장속도는 산화용액의 pH가 7.1에서 8.8까지 변함에 따라 성장속도가 143$\AA$/min에서 255 $\AA$/min 까지 증가하였다. 산화용액의 pH가 증가할수록 입경의 크기가 증가하고, 보자력은 감소하였다.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.136-140
• /
• 2008

$TiO_2$ photocatalyst has been known to exhibit a notable disinfecting activity against a broad spectrum of microorganisms. A lot of commercial $TiO_2$ photocatalyst products have been developed for antimicrobial purposes. However, a standard method has not yet been proposed for use in testing antimicrobial activity. In this study, we developed a $TiO_2$ photocatalytic adhesion test method with film as the standard testing method for the evaluation of antimicrobial activity. This method was devised by modifying the previous antimicrobial products test method, which has been widely used, and considering the characteristics of $TiO_2$ photocatalytic reaction. The apparatus for testing the antimicrobial activity was composed of a Black Light Blue (BLB) lamp as UV-A light source, a Petri dish as the cover material, and a polypropylene film as the adhesion film. The standard $TiO_2$ photocatalyst sample, Degussa P25 $TiO_2$ - coated glass, could only be used once. The optimal initial concentration of the microorganism, proper light intensity, and light irradiation time were determined to be $10^6$ CFU/mL, 1.0 mW/$cm^2$, and 3 hr, respectively, for testing and evaluating antimicrobial activity on the $TiO_2$ surface.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.221-225
• /
• 2009

A solar thermal collector is a solar collector specifically intended to collect heat: that is, to absorb sunlight to provide heat. A flat plate is the most common type of solar thermal collector, and is usually used as a solar hot water panel to generate solar hot water. A flat plate collector consists basically of an insulated metal box with a glass or a plastic cover and a dark-colored copper absorber plate. Solar radiation is absorbed by the copper absorber plate and transferred to water that circulates through the collector in copper tubes. Ultrasonic welding is an industrial technique whereby high-frequency ultrasonic acoustic vibrations are locally applied to work pieces being held together under pressure to create a solid-state weld. In this study, we developed solar collector ultrasonic welding machine with digital controlled power supply and tested various welding conditions such as welding pressure, welding amplitude, welding speed. Welding speed was considered in 2~12m/min. The width of ultrasonic welds was increased with welding amplitude by 2.2~2.5mm. The fracture load of ultrasonic welds showed 20% higher than domestic products.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.157.1-157.1
• /
• 2016

In this work, we experimentally investigated the solar absorption performance of Cu-based scalable nanostructured surfaces and compared their performance with the conventional TiNOX. We fabricated Cu-based nanostructured surfaces with a controlled chemical oxidation process applicable to a large area or complex geometry. We optimized the process parameters including the chemical compounds, dipping time and process temperature. We conducted both lab-scale and outdoor experiments to characterize the conversion efficiency of each absorber surfaces with single and double glazing setup. Lab-scale experiment was conducted with $50mm{\times}50mm$ absorber sample with 1-sun condition (1kW/m2) using a solar simulator (PEC-L01) with measuring the temperature at the absorber plate, cover glass, air gap and ambient. From the lab-scale experiment, we obtained ${\sim}91^{\circ}C$ and $94^{\circ}C$ for CuO and TiNOX surfaces after 1 hr of solar illumination at single glazing, respectively. To measure the absorber performance at actual operating condition, outdoor experiment was also conducted using $110mm{\times}110mm$ absorber sample. We measured the solar flux with thermopile detector (919P-040-50). From outdoor experiment, we observed ${\sim}123^{\circ}C$ and $131^{\circ}C$ for CuO and TiNOX with 0.6 kW/m2 insolation at double glazing, respectively. We showed that the suggested nanostructured CuO solar absorber has near-equivalent collection efficiency compared with the state-of-the-art TiNOX surfaces even with much simpler manufacturing process that does not require an expensive equipment.

• 대한기계학회논문집B
• /
• 제37권12호
• /
• pp.1061-1068
• /
• 2013

본 연구에서는 선행연구에서 제시된 태양열원식 해수 담수기 모델에 디젤 발전기 폐열을 적용하였을 때 설계변수에 따른 담수량을 수치해석을 통하여 예측하고, 최적설계를 위한 자료를 제시하고자 하였다. 선행연구를 기초로 수학적 모델을 설정하였고, 폐열 회수관으로부터의 열교환량을 고려하였다. 해석의 결과를 선행연구의 결과와 비교 분석하여 해석의 타당성을 확보하였고, 타당성이 검증된 해석모델을 적용하여 여러 가지 설계 변수에 따른 담수량을 예측하였다. 결과적으로 선행연구와 전반적으로 일치한 해석결과를 확인하였고, 디젤 발전기 폐열을 적용하였을 때 담수량 향상정도를 확인하였다. 또한 수치해석을 통하여 최적의 효용단 수, 유리덮개 경사각 등을 결정하였다.

• Parasites, Hosts and Diseases
• /
• 제21권2호
• /
• pp.187-192
• /
• 1983

In order to clarify infestation Pattern for the encysted larvae of digenetic trematodes from fresh-water fishes, this survey was carried out from March to September, 1983. A total of 380 fishes of 32 species wore collected with netting at the three reaches, upper, middle and lower in Mangyeong riverside area. After the fishes were dissected into small scraps, they were pressed under cover glass and examined-for the presence of those of digenetic trematodes with a microscope. The resillts obtailled were as follows; Out of a total of 380 knishes inspected, 320 fishes(84%) from 31 species were found positive with, digenetic trematode metacercariae; more than 10 species of the metacercariae Ivere detected in Pseuderasbora parva; .Gnnthepegen mtajimae, Microphysogokio yaluensis, Cultriculus eigenmanni and Gnnthopogon coreanus (more than 8 species) ; Aphyocypris chinensis (8 species) and etc. respectively. Clonorchis sinensis metacercariae were found positive from 93 fishes (25%) from 12 species and detection rates in other species of digenetic trematode metacercariae from various fishes were; Exorchis oviformis, 261 fisles (57%) from 28 species; Cyathocotyle criensalis, 47 fishcs (12%) from 12 species; Metorchis orientalis, 21 fishes (6%) from 12 species; Metagonimus yokogawai, 164 fishes (43%) from 26 species; Pseudesorchis major, 71 fishes (19%) from 18 species; Metacercaria haiegawai, 77 fishes (20%) from 25 species; Centrocestus armatus, 24 fishes (6%) from 7 species; Echinochasmus japonicus, 2 fishes (0.5%) from 2 species, and unidentified species, 34 fishes (9%) from 15 species respectively. The sums of average number of the encysted larvae of all species found in fish body/gram showed 83 in P.parva, Cobitis taenia (74.2), A. chinensis (28.5), Pseudoperilampus uyekii (26.6), G. majimae (19.6) and etc. respectively and the average peak number of each metacercaria in fish body/gram showed 21.7 C. sinensis, 245. ovifcrmis, 15, 3 M, crientalis and 6.1 5. japonicus in P. parva. 42.7 C. orientalis and 25.1 M. yohogawai in C. taenia; 8.3 C. armatus and 8.3 M. hasegawai in P. uyekii. 6.3 P. major in Carassius carassius, and 2.9 unidentified species in G, niajimae respectively.

• Tribology and Lubricants
• /
• 제32권2호
• /
• pp.56-60
• /
• 2016

Sapphire has a high hardness and strength and chemical stability as a superior material. It is used mainly as a material for a semiconductor as well as LED. Recently, the cover glass industry used by a sapphire is getting a lot of attention. The sapphire substrate is manufactured through ingot sawing, lapping, diamond mechanical polishing (DMP) and chemical mechanical polishing (CMP) process. DMP is an important process to ensure the surface quality of several nm for CMP process as well as to determine the final form accuracy of the substrate. In DMP process, the material removal is achieved by using the mechanical energy of the relative motion to each other in the state that the diamond slurry is disposed between the sapphire substrate and the polishing platen. The polishing platen is one of the most important factors that determine the material removal characteristics in DMP. Especially, it is known that the geometric characteristics of the polishing platen affects the material removal amount and its distribution. This paper investigated the material removal characteristics and the effects of the polishing platen groove in sapphire DMP. The experiments were preliminarily carried out to evaluate the sapphire material removal characteristics according to process parameters such as pressure, relative velocity and so on. In the experiment, the monitoring apparatus was applied to analyze process phenomena in accordance with the processing conditions. From the experimental results, the correlation was analyzed among process parameters, polishing phenomena and the material removal characteristics. The material removal equation based on phenomenological factors could be derived. And the experiment was followed to investigate the effects of platen groove on material removal characteristics.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.67-73
• /
• 2010

Unlike Urban building, horticultural facilities has a lot of heat loss through plastic or glass covering material which could be much influential to growing plant and consuming energy for heating greenhouse. In many cases, heat loss from a break of cover, a gap of joint sealing, the entrance to greenhouse and windows for ventilation are the main factors considered in calculating the heating load for horticultural facilities. however the normal observation through human eye and digital camera could not recognize where the heat loss occurred. but the infrared thermal image camera with detecting thermal difference could be very effective for noticing heat loss by analyzing infrared thermal image. In this study, greenhouse structure, covering material, internal and external provisions for Horticultural facilities were surveyed in different sites and Infrared thermal camera shooting and image analysis were performed for auditing heat loss from cultivation facilities The results from this study were that unexpected heat loss had been noticed in 7 representative cases of greenhouse such as side wall covered with single or double plastic, and the joint of horizontal thermal curtain, roof without horizontal thermal curtain, entrance to greenhouse, windows for ventilation. the most important factors for keeping heat energy were whether the horizontal thermal curtain with multifold thermal material was installed or not. The internal or external covering using multifold thermal curtain proved to be the most effective ways to keep heat energy from losing through heat transmission, heat radiation. from inside to outside the horticultural facilities.