• 제목/요약/키워드: Cover Model

검색결과 1,226건 처리시간 0.038초

기상청 관측 자료와 눈 밀도 공식을 이용한 적설하중의 근사 추정 (An Approximate Estimation of Snow Weight Using KMA Weather Station Data and Snow Density Formulae)

  • 조지영;이승재;최원
    • 한국농림기상학회지
    • /
    • 제22권2호
    • /
    • pp.92-101
    • /
    • 2020
  • 대설로 인한 시설 농가의 피해를 예방하고 경감시키기 위해서는 기존의 적설 깊이와 더불어 적설하중에 대한 예보가 추가로 제공되어야 한다. 본 연구에서는 눈의 밀도 및 적설하중과 관련하여 해외 연구에서 사용하고 있는 이론과 공식들을 검토하고, 이를 국내에서 장기간의 농업기상관측 이력을 가지고 있는 수원에 적용하여 얻는 적설하중 결과를 소개하였다. 지난 30년(1988~2017) 간 국내 94개 기상대와 무인자동기상 관측소에서 측정된 적설(3시간 신적설, 최심신적설, 최심적설) 깊이 자료를 이용하여 우리나라 대설주의보와 대설경보에 해당하는 적설 깊이의 빈도를 살펴보았다. 우리나라 권역별 적설빈도 공간분포를 보면 대설주의보에 해당하는 신적설은 전북지역에서 많이 발생했고, 대설경보에 해당하는 신적설은 경북과 강원지역에서 많이 나타났다. 기록적인 대설은 경북과 강원지역에서 나타났으나, 최근의 겨울철 대설 피해는 경기, 경북, 전남에서 나타났다. 즉 적설 깊이가 깊더라도 적설하중이 무겁지 않다면 큰 피해가 발생하지 않는 것을 확인할 수 있었다. 수원지역의 적설하중을 추정한 결과를 보면 공식들에 따라 다양한 값들과 특징을 보였다. 대부분 적설 깊이가 깊을 때 적설하중이 무겁게 나타났지만 최대적설하중과 최심적설이 반드시 같은 날에 발생하지는 않았다. 이러한 수원지역의 결과는 다른 지역에서의 적설하중을 추정하는데 도움을 줄 수 있고, 온실구조 설계 기준의 표준 확립과 적설하중 예보를 통해 농가의 경제적 손실을 줄이는데 기여할 것이다.

구름과 에어로솔의 혼재시 에어로솔의 광학특성이 상향 단파 복사에 미치는 영향 (Effects of Aerosol Optical Properties on Upward Shortwave Flux in the Presence of Aerosol and Cloud layers)

  • 이권호
    • 대한원격탐사학회지
    • /
    • 제33권3호
    • /
    • pp.301-311
    • /
    • 2017
  • 에어로솔의 광학특성과 연직고도는 태양 복사의 반사와 흡수과정을 통하여 지구복사수지에 영향을 미치게 된다. 본 연구에서는 복사전달모델과 위성관측자료를 이용하여 동북아시아 지역에서 구름의 존재 시 에어로솔 층에 의한 복사특성을 분석하였다. 복사전달 모의 결과는 구름이 하부에 존재하는 경우에 에어로솔 층의 고도가 높아짐에 따라 대기 온난화 효과가 증가하였다. 이러한 관계는 에어로솔의 광 흡수성이 커질수록, 지표 반사도가 증가할수록 비례하는 경향을 나타내었다. 그리고 연구대상지역 ($20-50^{\circ}N$, $110-140^{\circ}E$)에서 주요 에어로솔 이벤트 사례에 대하여, UV Absorbing Aerosol Index (AAI) derived from Total Ozone Mapping Spectrometer (TOMS), cloud parameters derived from the Moderate Resolution Imaging Spectro-radiometer (MODIS), with Upward Shortwave Flux (USF) Clouds and the Earth's Radiant Energy System (CERES) 위성관측자료를 이용하여 광 흡수성 에어로솔에 의한 영향을 정량적으로 분석하였다. 각 사례에 대한 평균적인 복사효과는 약 6 - 26 %에 해당하는 상향 단파 복사량의 감쇄효과가 나타났다. 이러한 결과는 에어로솔에 의한 직접효과와 간접효과를 정량화 하기 위한 중요성을 설명해 준다.

Application of X-band polarimetric radar observation for flood forecasting in Japan

  • Kim, Sun-Min;Yorozu, Kazuaki;Tachikawa, Yasuto;Shiiba, Michiharu
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2011년도 학술발표회
    • /
    • pp.15-15
    • /
    • 2011
  • The radar observation system in Japan is operated by two governmental groups: Japan Meteorological Agency (JMA) and the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) of Japan. The JMA radar observation network is comprised of 20 C-band radars (with a wavelength of 5.6 cm), which cover most of the Japan Islands and observe rainfall intensity and distribution. And the MLIT's radar observation system is composed of 26 C-band radars throughout Japan. The observed radar echo from each radar unit is first modified, and then sent to the National Bureau of Synthesis Process within the MLIT. Through several steps for homogenizing observation accuracy, including distance and elevation correction, synthesized rainfall intensity maps for the entire nation of Japan are generated every 5 minutes. The MLIT has recently launched a new radar observation network system designed for flash flood observation and forecasting in small river basins within urban areas. It is called the X-band multi parameter radar network, and is distinguished by its dual polarimetric wave pulses of short length (3cm). Attenuation problems resulting from the short wave length of radar echo are strengthened by polarimetric wavelengths and very dense radar networks. Currently, the network is established within four areas. Each area is observed using 3-4 X-band radars with very fine resolution in spatial (250 m) and temporal (1 minute intervals). This study provides a series of utilization procedures for the new input data into a real-time forecasting system. First of all, the accuracy of the X-band radar observation was determined by comparing its results with the rainfall intensities as observed by ground gauge stations. It was also compared with conventional C-band radar observation. The rainfall information from the new radar network was then provided to a distributed hydrologic model to simulate river discharges. The simulated river discharges were evaluated again using the observed river discharge to estimate the applicability of the new observation network in the context of operations regarding flood forecasting. It was able to determine that the newly equipped X-band polarimetric radar network shows somewhat improved observation accuracy compared to conventional C-band radar observation. However, it has a tendency to underestimate the rainfall, and the accuracy is not always superior to that of the C-band radar. The accuracy evaluation of the X-band radar observation in this study was conducted using only limited rainfall events, and more cases should be examined for developing a broader understanding of the general behavior of the X-band radar and for improving observation accuracy.

  • PDF

지역별 온실내의 잉여 태양에너지 산정 (Estimation of Surplus Solar Energy in Greenhouse Based on Region)

  • 윤용철;임재운;김현태;김영주;서원명
    • 농업생명과학연구
    • /
    • 제45권4호
    • /
    • pp.135-141
    • /
    • 2011
  • 본 연구에서는 주간동안 온실 내에서 발생되는 잉여 태양에너지를 분석하고, 또한 잉여 태양에너지의 적정 축열 시스템 설계에 필요한 기초자료를 제공할 목적으로 수행하였다. 분석에 이용된 기상자료는 표준기상년 데이터로서 이용하여 국내 주요 지역을 대상으로 온실 형태별로 잉여 태양에너지를 분석하였을 뿐만 아니라 소요 난방에너지 등도 분석 및 검토하였다. 이상의 결과를 요약하면 다음과 같다. 9개 지역을 대상으로 지역별 잉여 태양에너지를 대해 분석한 결과, 난방에너지 대비 잉여 태양에너지 비율은 온실 형태별로 각각 약 212.0~228.0%로서 제주가 가장 높게 나타났다. 그 다음으로 부산, 광주, 진주, 대구, 대전, 전주, 수원, 및 대관령 순으로 나타났다. 그리고 온실 형태에 관계없이 몇 몇 지역을 제외하면 잉여 태양에너지만으로 소요 난방에너지를 거의 대체할 수 있을 것으로 판단되었다.

부산항, 인천항, 광양항의 수출행태분석 (Analysis of Export Behaviors of Busan, Incheon and Gwangyang Port)

  • 모수원;정홍영;이광배
    • 한국항만경제학회지
    • /
    • 제32권3호
    • /
    • pp.35-46
    • /
    • 2016
  • 우리나라는 국토가 남과 북으로 단절되고 시장이 작아 수출의존도가 높은 경제구조이어서 항만은 우리 경제에 필수불가결하다. 이에 본고는 우리나라 대표 항만인 부산항, 광양항, 인천항의 수출이 어떠한 행태를 갖는가를 밝힌다. 수출은 일반적인 형태인 환율과 경기의 함수로 정의하되 환율의 부호가 이론이 제시하는 것과 상이하게 나타나는 경향이 있기 때문에 환율을 미 달러화의 원화표시 명목환율, 광의와 협의의 명목실효환율과 실질실효환율 5가지로 구분하여 구성한다. 그리고 3개 항만 모두 명목실효환율이 명목환율이나 실질실효환율보다 우수한 추정 결과를 보이며, 명목실효환율에서도 광의의 명목실효환율보다 협의의 명목실효환율을 이용한 모형이 수출의 추정에 적합함을 밝힌다. 명목실효환율로 구성한 모형의 안정성을 GPH 공적분검정을 통해 밝히고 전향적 이동회귀분석을 실시하여 환율과 경기가 항만의 수출에 미치는 영향력이 지속적으로 약해지고 있다는 것과 환율보다 경기의 영향력이 더 크다는 것을 보인다. 오정수정모형을 추정하여 수출에서 발생한 일시적 괴리를 조정하는 속도가 부산항에서 가장 빠르고 광양항이 가장 더디며, 부산항의 균형회복이 두 항만에 비해 상당히 빠르다는 이루어진다는 것을 밝힌다. 예측오차의 분산분해와 역사적 분해를 통해 수출은 강한 외생성을 갖는 변수이며, 이에 따라 항만의 수출이 환율과 경기와 같은 경제변수 외에 다른 변수들의 영향을 크게 받게 된다. 항만의 수출에서 환율과 경기와 같은 경제적 변수가 중요한 역할을 하지만 경제외적 변수도 경제적 변수 못지않게 중요한 비중을 차지한다는 것을 의미한다. 또한 수출의 외생성이 광양항에서 가장 강하고 부산항에서 가장 약하며, 항만의 불균형 조정속도는 광양항에서 가장 늦고 부산항에서 가장 빠르다는 사실을 함께 고려하면 항만 수출불균형을 조정하는 힘은 환율과 경기보다 다른 요인들에서 나온다는 것을 의미함을 밝힌다.

LID 기술 적용 지역 선정에 따른 물순환 개선 연구 -온천천 유역을 대상으로- (A Study on Improvement of Hydrologic Cycle by Selection of LID Technology Application Area -in Oncheon Stream Basin-)

  • 김재문;백종석;신현석
    • 한국산학기술학회논문지
    • /
    • 제22권4호
    • /
    • pp.545-553
    • /
    • 2021
  • 기후변화와 도시화로 인해 도시 내 수재해의 발생 빈도가 지속적으로 증가하고 있다. 이로 인한 수재해 피해를 감소하기 위해, 대처방안에 대한 연구가 수행되고 있다. 도시유역의 정량적인 유출량 예측과 홍수량 저감 연구를 위해 유출량에 영향을 미치는 매개변수 중 하나인 침투성을 기준으로한 분석이 필요하다. 본 연구에서는 부산의 대표적 도시하천인 온천천 유역을 대상으로 SWAT 모형을 모의하여 수문학적반응단위별로 CN 값을 산정하여 침투성 맵을 작성하였다. 작성한 침투성 맵을 바탕으로 EPA SWMM을 이용해 단기 강우사상에 대해 LID 기술 적용이 유역의 물순환에 미치는 영향을 분석하였다. 대상유역에 적용된 LID 요소기술로는 주거단지지에 옥상녹화, 도로에 투수성포장을 설치하였다. 침투성 맵을 기준으로 선정된 소유역의 토지피복 상태와 LID 기술 적용에 따라 유출량, 첨두유량, 유출율은 감소하였고 침투량은 증가한 것으로 나타나 LID 기술이 도시유역의 물순환에 긍정적인 효과를 내는 것으로 확인하였다.

단철근 보의 최소철근비에 대한 고찰 (A Study of Minimum Reinforcement Ratio of Singly Reinforced Beamy)

  • 최승원
    • 한국산학기술학회논문지
    • /
    • 제22권4호
    • /
    • pp.396-402
    • /
    • 2021
  • 철근콘크리트 휨부재 단면은 휨강도를 확보함과 동시에 연성을 확보할 수 있도록 설계되어야 한다. 설계기준에서는 연성거동을 확보하기 위해 철근비나 중립축 깊이를 제한한다. 균형철근비 보다 적은 철근량이 배치된 단면은 연성이 확보되므로 균형철근비는 이론적인 최대철근비가 된다. 그러나 너무 적은 양의 철근량이 배치된 단면은 연성 거동과 관계 없이 균열 휨모멘트를 만족하지 못하고 취성 파괴될 수 있다. 또한, 최근 들어 고강도 재료의 사용이 증가함에 따라 최소철근비로 설계된 부재의 설계도 증가하고 있다. 이에 설계기준에서는 최소철근량에 대해서도 규정하고 있다. 콘크리트구조기준(2012)에서는 최소철근량에 대하여 철근과 콘크리트 강도의 항으로 직접적으로 규정하였다. 그러나 개정된 콘크리트구조 학회기준(2017)에서는 설계 휨강도와 균열 모멘트 사이의 관계를 통해 최소철근량을 간접적으로 제시하고 있다. 이는 피복두께에 대한 영향을 반영할 수 있지만, 재료 모델에 대한 정의가 필요하다. 따라서 이 연구에서는 콘크리트구조기준(2012)과 콘크리트구조 학회기준(2017)의 최소철근량에 대한 규정을 비교 검토하고, 다양한 해석 변수를 통해 최소철근량의 변화를 검토하여 합리적인 최소철근량 검토 방안에 대하여 고찰하였다.

Smart City Energy Inclusion, Towards Becoming a Better Place to Live

  • Cha, Sang-Ryong
    • World Technopolis Review
    • /
    • 제8권1호
    • /
    • pp.59-70
    • /
    • 2019
  • Where is a better place to live? In the coming era, this should be more than simply a livable place. It should be an adaptable place that has a flexible system adaptable to any new situation in terms of diversity. Customization and real-time operation are needed in order to realize this technologically. We expect a smart city to have a flexible system that applies technologies of self-monitoring and self-response, thereby being a promising city model towards being a better place to live. Energy demand and supply is a crucial issue concerning our expectations for the flexible system of a smart city because it is indispensable to comfortable living, especially city living. Although it may seem that energy diversification, such as the energy mix of a country, is a matter of overriding concern, the central point is the scale of place to build grids for realizing sustainable urban energy systems. A traditional hard energy path supported by huge centralized energy systems based on fossil and nuclear fuels on a national scale has already faced difficult problems, particularly in terms of energy flexibility/resilience. On the other hand, an alternative soft energy path consisting of small diversified energy systems based on renewable energy sources on a local scale has limitations regarding stability, variability, and supply potential despite the relatively light economic/technological burden that must be assumed to realize it. As another alternative, we can adopt a holonic path incorporating an alternative soft energy path with a traditional hard energy path complimentarily based on load management. This has a high affinity with the flexible system of a smart city. At a system level, the purpose of all of the paths mentioned above is not energy itself but the service it provides. If the expected energy service is fixed, the conclusive factor in choosing a more appropriate system is accessibility to the energy service. Accessibility refers to reliability and affordability; the former encompasses the level of energy self-sufficiency, and the latter encompasses the extent of energy saving. From this point of view, it seems that the small diversified energy systems of a soft energy path have a clear advantage over the huge centralized energy systems of a hard energy path. However, some insuperable limitations still remain, so it is reasonable to consider both energy systems continuing to coexist in a multiplexing energy system employing a holonic path to create and maintain reliable and affordable access to energy services that cover households'/enterprises' basic energy needs. If this is embodied in a smart city concept, this is nothing else but smart energy inclusion. In Japan, following the Fukushima nuclear accident in 2011, a trend towards small diversified energy systems of a soft energy path intensified in order to realize a nuclear-free society. As a result, the Government of Japan proclaimed in its Fifth Strategic Energy Plan that renewable energy must be the main source of power in Japan by 2050. Accordingly, Sony vowed that all the energy it uses would come from renewable sources by 2040. In this situation, it is expected that smart energy inclusion will be achieved by the Japanese version of a smart grid based on the concept of a minimum cost scheme and demand response.

파이썬(Python) 기반의 코딩교육을 적용한 대학 미적분학의 교수·학습 (Teaching and Learning of University Calculus with Python-based Coding Education)

  • 박경은;이상구;함윤미;이재화
    • 한국수학교육학회지시리즈E:수학교육논문집
    • /
    • 제33권3호
    • /
    • pp.163-180
    • /
    • 2019
  • 본 연구에서는 다양한 배경을 가진 대학 신입생들이 단기간에 미적분학의 주요 개념을 이해할 수 있도록 돕고, 현실에서 접하는 복잡한 문제들에 대한 문제해결력도 기르면서, 동시에 컴퓨팅 사고력도 신장시킬 수 있는 미적분학 교수 학습에 대하여 논한다. 구체적인 방안으로, 본 연구진은 '파이썬(Python) 기반의 코딩(coding)교육을 적용한 대학 미적분학의 교수 학습' 콘텐츠를 개발하고 실제 수업 현장에 적용하여 유의미한 성과를 거둔 사례를 보고한다. 즉, 파이썬 언어 기반의 코딩교육을 적용한 미적분학 I, II의 구체적인 교수 학습 설계, 실천 계획안 그리고 평가라는 전 과정이 실제로 진행된 사례와 그에 활용된 자료들을 정리하여 공유한다. 개발된 교안과 코드 및 사이버 실습실은 언제 어디서나 무료로 활용할 수 있으며, 교수자와 학생은 공유된 콘텐츠와 학생활동 기록을 참고하며, 자유롭게 미적분학을 교수 학습하고, 주어진 코드를 활용하여 실습하면서 미적분학의 직관적인 이해를 높임과 동시에 컴퓨팅 사고력도 신장시킬 수 있도록 하였다. 또한 교수자는 학생들의 질의 응답 참여, 보고서 발표, 팀워크 등이 포함된 플립드러닝(flipped learning)과 과정중심의 모든 데이터를 기반하여 평가함으로써 학생들의 미적분학 지식에 대한 상향평준화를 돕게 된다. 본 연구에서 제시한 대학 미적분학의 교수 학습 사례는 학생들이 미적분학 개념과 컴퓨팅 사고력을 동시에 신장시켜 사회가 필요로 하는 인재로 성장할 수 있도록 도울 수 있는 가능성을 보여주는 대학 수학 교육의 교수 학습 모델이 될 것으로 본다.

VIIRS와 MODIS 자료를 활용한 중분류 토지이용별 알베도 분석 (Analysis of Albedo by Level-2 Land Use Using VIIRS and MODIS Data)

  • 이용관;정지훈;장원진;김진욱;김성준
    • 대한원격탐사학회지
    • /
    • 제38권6_1호
    • /
    • pp.1385-1394
    • /
    • 2022
  • 본 연구에서는 MODerate resolution Imaging Spectroradiometer (MODIS) 자료를 활용하여 20년(2002-2021)의 중분류 토지피복별 알베도 변화를 분석하고, Visible Infrared Imaging Radiometer Suite (VIIRS)의 10년(2012-2021) 자료를 활용해 MODIS 자료와의 차이를 분석하였다. MODIS와 VIIRS의 알베도 자료는 Bidirectional Reflectance Distribution Function (BRDF) 모델을 활용해 생산된 Sinusoidal Tile Grid 기반 500 m 공간해상도의 일단위 알베도 자료 MCD43A3와 VNP43IA3를 우리나라 범위에 대하여 구축하였다. Python 3.9 기반으로 작성된 코드를 활용하여 Reprojection을 하였으며, Resampling method는 Nearest neighbor를 적용하였다. 알베도 분석에는 단파 영역(Shortwave)의 White sky albedo와 Black sky albedo를 활용하였다. MODIS 자료를 활용한 20년의 알베도 분석 결과, 모든 토지이용에서 알베도가 상승하는 경향이 나타났다. 2000년대(2002-2011)에 비해 2010년대(2012-2021)의 평균 알베도가 산림 지역에서 0.0027의 가장 큰 상승값을 보였고, 그 다음으로 초지가 0.0024의 상승값을 보였다. VIIRS와 MODIS의 알베도를 비교한 결과, VIIRS의 알베도가 0.001에서 0.1 만큼 더 큰 것으로 나타났으며, 이는 영상의 촬영시기에 따른 지표면 반사도와 센서의 특성 차이에 의한 것으로 판단된다.