• 자원환경지질
• /
• 제18권4호
• /
• pp.343-355
• /
• 1985

본 논문에서는 세계적으로 유명한 대규모의 황화철상(黃化鐵床)에서 산출되는 7종의 이방성(異方性) 광석광물(鑛石鑛物)을 대상으로 물리적(物理的) 특성(特性)을 실험 연구하고, 광물(鑛物) 고유의 타광학성(他光學性), 결정방향(結晶方向)과의 상관 관계를 밝히며, 금속자원 광물의 감정(鑑定)을 위한 자료를 제시하고자 시도되었다. 연구대상 이방성(異方性) 광물(鑛物)(covellite, graphite)은 광물상호간의 white light color의 차이 뿐아니라 동종광물(同種鑛物)내부의 두 편광(偏光)(상광선(常光線), 이상광선(異常光線))의 방향에 따라 동일한 형태이나 큰 정량적 차이(R=약 10%)를 보여주는 spectral profile을 갖는다. 결정방향(結晶方向)에 따라 고찰된 이방성(異方性) 광물(鑛物)(enargite, famatinite)의 반사력(反射力)은 벽개면에 평행한 면에서 항상 높은 값(R=약 5%)을 갖는다. 측정 반사력(反射力)을 이용하여 규명된 연구 광물종의 광학적(光學的) 대칭성(對稱性)은 covellite가 일륜성(一輪性)(+), graphite는 일축성(一軸性)(-)이고, enargite와 famatinite는 이축성(二軸性)(+)이며, 부반사력(復反射力)이 낮은 gratonite의 경우는 결정이 불가능하였다. 표준하중별로 실시된 휘경도(徽硬度)실험에서 이방성광물(異方性鑛物)(enargite, famatinite)의 결정방향은 큰 영향을 미치는데, 즉 벽개면에 평행한 면에서 항상 높은 (HV=> $200kg/mm^2$) 휘경도(徽硬度)값을 보여준다. 모든 실험광물이 각각 특징적인 indentation의 형태를 갖음은 징경도(徵硬度)와 함께 광물감정(鑛物鑑定)에 유용할 것이다. 실험광물이 최소하중에서 항상 불규칙한 휘경도(徽硬度)값을 갖는 것은 관찰에서 기인되는 측정오차로 사료된다. 휘경도(徽硬度)-반사력(反射力)의 상관 관계를 이용한 시험광물의 분류는 Gray-Millman(1962)의 실험결과와 일치된다. 한편 반사도(反射度)의 과장별 측정오차와 그의 제거 방안이 논의되었다.

• 한국표면공학회지
• /
• 제53권1호
• /
• pp.9-14
• /
• 2020

CuS (copper sulfide) thin films having the same thickness of 100nm were deposited on the glass substrates using by radio frequency (RF) magnetron sputtering method. RF powers were applied as a process variable for the growth of CuS thin films. The structural and optical properties of CuS thin films deposited under different power conditions (40-100W) were studied. XRD analysis revealed that all CuS thin films had hexagonal crystal structure with the preferential growth of (110) planes. As the sputtering power increased, the relative intensity of the peak with respect to the (110) planes decreased. The peaks of the two bands (264cm^-1 and 474cm^-1) indicated in the Raman spectrum exactly matched the typical spectral values of the covellite (CuS). The size and shape of the grains constituting the surface of the CuS thin films deposited under the power condition ranging from 40W to 80W hardly changed. However, the spacing between crystal grains tended to increase in proportion to the increase in sputtering power. The maximum transmittance of CuS thin films grown at 40W to 80W ranged from 50 % to 51 % based on 580nm wavelength, and showed a relatively small decrease of 48% at 100W. The band gap energy of the CuS thin films decreased from 2.62eV (at 40W) to 2.56eV (at 100W) as the sputtering power increased.

• 자원환경지질
• /
• 제37권3호
• /
• pp.291-301
• /
• 2004

만장광산 폐광석 내의 황동석 풍화과정과 용해된 금속이온의 거동을 밝히고자 광물학적 연구를 수행하였다. 광물학적 연구는 반사현미경 관찰, XRD 분석, SEM/EDS 분석을 실시하였다. 현미경 관찰 결과 황동석의 풍화는 주로 입자내의 균열부와 입자 가장자리를 따라 진행되고 있으며, 풍화정도에 따라 4단계로 구분할 수 있었다. 2차 광물에 대한 광물학적 연구결과 침철석, 코벨라이트, 구리탄산염광물(남동석, 공작석), 브로칸타이트 등이 인지되었다. 철수산화광물은 구리와 비소를 흡착하고 있으며, 흡착된 비소의 함량은 결정도가 낮은 경우 상대적으로 높았다. 산화환경에서 황동석의 풍화작용은 입자 내부의 균열부에서 우세하였으나, 코벨라이트와 브로칸타이트로의 치환반응은 입자내부에서 우세하였다. 황화광물의 풍화로 용해된 금속이온(구리, 철, 비소)은 철수산화광물에 흡착, 혹은 구리탄산염광물로 침전 등을 통해 자연적으로 고정화되어지고 있음이 확인된다.

• 자원환경지질
• /
• 제36권3호
• /
• pp.177-189
• /
• 2003

서보광산의 폐광석에 대한 황화광물의 산화작용과 용해된 금속이온들의 이동을 제한하는 메카니즘을 밝히고자 광물학적 연구를 수행하였다. 광물학적 연구를 위해서 반사현미경 관찰, XRD 분석, SEM/EDS 분석을 실시하였다. 폐광석에 대한 광물학적 연구를 통해 앵글레사이트(anglesite), 코벨라이트(covellite), 침철석(goethite), 자연황(native sulfur), 엔소타이트(nsutite) 등의 2차광물을 확인하였으며, 이들 2차광물은 용해된 비소, 구리, 철, 망간, 납, 아연의 확산을 제어한다. 용해된 비소, 구리, 철, 망간, 납, 아연은 철수산화광물과 망간수산화광물에 흡착되거나 공침되기도 한다. 철수산화광물은 결정도가 낮은 것과 높은 것(침철석)으로 분류된다. 비소는 결정도가 낮은 철수산화광물에서 9∼24 wt.%가 검출되며, 결정도가 더 높은 철수산화광물(침철석 등)에서는 상대적으로 낮은 함량(0.6∼7.7wt.%)이 검출되었다. 이것은 결정도가 낮은 철수산화광물에 흡착되었던 비소가 철수산화광물의 결정도가 높아지면서 비소를 방출하기 때문이거나 비표면적의 차이에 기인한 것으로 해석된다. 폐광석으로부터 용해된 중금속과 미량금속원소들은 침전(Fe, Mn, Cu, Pb), 공침(Fe, Mn) 및 흡착(As, Cu, Pb, Zn) 등의 화학반응을 통하여 다시 고정화됨으로써, 현장에서 자연적으로 정화되고 있다. 이러한 광물학적 연구결과들은 광산 폐기물의 지화학적 환경 영향평가에 이용할 수 있고, 가능한 광산복원 계획을 세우는 데 유용한 자료로 사용될 수 있다.

• 자원환경지질
• /
• 제19권spc호
• /
• pp.227-237
• /
• 1986

The Duk-Eum mine located in Kongsan-myeon, Naju-gun, Cheolanamdo is producing silver ore mainly, with rare gold association. The grade-up and recovery of the concentrates have been concerned to the main problem. And then, this study aimed at applying the basic data for ore processing. In the first half of the study, the attempts were made to identify the ore minerals, this followed by determination of the mineral texture, paragenesis, grain size, and size distribution by employing the microscopical method and the etching test. The results of the study are as follows: 1. The ore deposit is composed of the hydrothermal fissure linked veins, and filling cavities are mostly tensile fractures or joints, in rhyolitic rocks as a wall rock. 2. The principle ore minerals are native silver, acanthite, canfieldite, pyrargyrite, galena, tetrahedrite, sphalerite, pyrrhotite, chalcopyrite, chalcocite, covellite, zincite, and the gangue minerals are quartz and calcite. 3. The grain size of each ore minerals before grinding are; max. $2\frac{1}{2}$ mesh, medium 48-100 mesh(main size, contained over 80%), min. 3200mesh. And the grain size of each ore minerals after grinding is; max. 42mesh, medium 65-250mesh(main size, contained over 80%), min. 3200mesh. 4. The properties of the mineral texture effected on the ore dressing are follows; a) Inclusion texture; the fine grains of chalcopyrite is included in most acanthite, and rarely, that of galena included in acanthite. b) Exsolution texture; pyrargyrite is exsolved in acanthite. c) Replacement texture; native silver replaced pyrargyrite, and acanthite replaced galena. d) Interlocking paragenetic texture; the interlocking paragenetic minerals are pyrite, chalcopyrite, chalcocite, canfieldite. e) Fissure filling texture; chalcopyrite was filled along the cracks in acanthite. Among of the above texture, it is impossible to liberate the grains of a), and more difficult to liberate those of b) and c), while easy to liberate those of d) and e).

• 자원환경지질
• /
• 제28권1호
• /
• pp.9-17
• /
• 1995

The Kamkye Cu-Pb-Zn-Au-Ag deposits occur as quartz veins that filled fault-related fractures of NW system developed in the Cretaceous Gyeongsang basin. Three major stages of mineral deposition are recognized: (1) the stage I associated with wall rock alteration, such as sericite, chlorite, epidote and pyrite, (2) the early stage II of base-metal mineralization such as pyrite, hematite, and small amounts of sphalerite and chalcopyrite. and the middle to late stage II of Cu-As-Sb-Au-Ag-S mineralization, such as sphalerite, chalcopyrite, galena with tetrahedrite, tennantite, pearceite, Pb-Bi-Cu-S system, argentite and electrum. (3) the stage III of supergene mineralization, such as covellite, chalcocite and malachite. K-Ar dating of alteration sericite is a late Cretaceous ($74.0{\pm}1.6Ma$) and it may be associated with granitic activity of nearby biotite granite and quartz porphyry. Fluid inclusion data suggest a complex history of boiling, cooling and dilution of ore fluids. Stage II mineralization occurred at temperatures between 370 to $220^{\circ}C$ from fluids with salinities of 8.4 to 0.9 wt.% NaCl. Early stage II($320^{\circ}C$, 2.0 wt.% NaCl) may be boiled due to repeated fracturing which opened up the hydrothermal system to the land surface, and which resulted in a base-metal sulfide. Whilst the fractures were opened to the surface, mixing of middle-late stage II ore fluids with meteoric waters resulted in deposition of Cu-As-Sb-Au-Ag minerals from low temperature fluids(${\leq}290^{\circ}C$). Boiling of ore fluids may be occured at a pressure of 112 bar and a depth of 412 m. Equilibrium thermodynamic interpretation of sphalerite-tetraherite assemblages in middle stage II indicates that the ore-forming fluid had log fugacities of $S_2$ of -6.6~-9.4 atm.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.27-32
• /
• 2020

CuS thin films were deposited on glass substrates at room temperature by RF magnetron sputtering. The structural and optical properties of CuS thin films grown by varying RF-power from 40 W to 100 W were studied. From the XRD analysis, we confirmed hexagonal crystal structures grown in the preferred orientation of the (110) plane in all CuS thin films, and the intensity of the main diffraction peak increased in proportion to the increase of RF-power. In the case of CuS thin film deposited at 40W, small-sized particles formed a thin and dense surface morphology with narrow pore spacing, relatively. As the power increased, the grain size and grain boundary spacing increased sequentially. The peaks for the binding energy of Cu 2p_3/2 and Cu 2p_1/2 were determined at 932.1 eV and 952.0 eV, respectively. The difference in binding energy for the Cu²⁺ states was the same at 19.9 eV regardless of process parameters. The transmittance and band gap energy in the visible region tended to decrease with increasing sputtering powers.

• 자원환경지질
• /
• 제3권4호
• /
• pp.199-222
• /
• 1970

One of the biggest sulfide metallic (Cu, Pb, Zn) ore deposits of South Korea is located in the area of Seo-myeon, Shiheung-gun, Gyeonggi-do. Geology of the region is mostly composed of metasediments of biotite schist, graphite schist, injection gneiss, sericite schist, limesilicate and quartzite from bottom, those are applicable to so-called Yeoncheon System of Pre-Cambrian, and granodiorite, quartz porphyry, basic dykes are outcroped in a small scope as intrusives. The origin of the ore deposit is pyrometasomatic contact deposits due to hydrothermal replacement and the ore bodies are imbedded in lower bed of limesilicate formation as impregnation and ore minerals are galena, sphalerite, marmatite, chalcopyrite, bornite, chalcocite, covellite, and the later two minerals are both hypogene and supergene. Gangue minerals are mostly skarn minerals those hornblende, diopside, epidote, hedenbergite, chlorite, garnet and quartz except primary calcite and quartz. Boundary plane (NS strike) between schists and limesilicate seemed to be primary opening of ore solution and fractures bearing $N50^{\circ}{\sim}80^{\circ}W$ are secondary structural control for localization of ore minerals and the third structural controls are both irregular gashes and schistosity in small scale. Photogeological study was carried with vertical aerial photo scaled 1: 38,000 and enlarged 1 : 10,000 under stereoscope. The study on the area convinced the fact that the geologic boundaries between rocks, limesilicates and quartzites, are traced easily by their typical topographic feature and drainage, and the main fracture patterns which derived from the result of fracture traces, that photogeologic lineament observed under stereoscope, are those bearing (1) $N20^{\circ}W$, (2) $N58^{\circ}W$, (3) $N76^{\circ}W$, (4) EW, (5) $N20^{\circ}W$, (6) $N62^{\circ}W$, (7) $N77^{\circ}W$. Among the written fractures, (5) (not schistosity, in case of fault) (6) (7) are post-mineral faults and others are pre-mineral faults and others are pre-mineral structures, and (2) (3) (6) (7) are coincided with statistical figure of 208 fractures surveyed in underground. By the result of the study, mineralized zone, are presumed to extend north and southward, total length about 4km.

• 자원환경지질
• /
• 제48권6호
• /
• pp.525-536
• /
• 2015

트라피체 프로젝트는 현재 탐사단계 중 후기(Advanced exploration)단계의 프로젝트이며 안다우아일라스-야우리 광상구 연변에 나타나는 다양한 반암 광상 중 일부라고 볼 수 있다. 이 광상은 몬조나이트 반암의 관입과 관계가 있으며, 또한, 올리고세 각력 파이프와 밀접한 관계를 가지고 있는 광상이다. 광화작용은 일차 유화광물인 황철석, 황동석, 반동석 및 휘수연석으로 구성된다. 2차 유화광물인 휘동석, 코벨라이트, 다이게나이트가 산출되며 산화동으로서 공작석, 흑동석, 적동석등이 산출된다. 침출작용(lixiviation)이나 부화과정 결과로서, 광화작용은 비전형적인 누대구조를 보여주기도 한다. 각력과 반암이 나타나는 구역에서는 수직적인 누대구조를 보여주는데, 북쪽 인근에서는 침출대, 2차부화대, 전이대 및 초생광화대가 나타나고 광상의 서쪽에서는 산화대 및 혼합대가 좁게 나타난다. 광상의 추정자원은 920 Mt @ 0.41% Cu이며 한계품위는 0.15%로 산정하고 있다.

• 한국정보컨버전스학회:학술대회논문집
• /
• 한국정보컨버전스학회 2008년도 International conference on information convergence
• /
• pp.99-102
• /
• 2008

Mineralogical studies of ore and alteration minerals have been conducted for the Hugo Dummett porphyry copper deposit. The Hugo Dummett porphyry copper gold deposit is located in the South Gobi region, Mongolia and currently being explored. This deposit divided into the Cu-rich Hugo Dummett South and the Cu-Au-rich Hugo Dummett North deposits. The Hugo Dummett deposits contain 1.08% copper(1.16 billion tonnes in total) and 0.23 g/t gold(Oyunchimeg et al., 2006). Copper-gold mineralization at these deposit are centered on a high-grade copper(typically>2.5%) and gold(0.5-2 g/t) zone of intense quartz stockwork veining. The high grade copper and gold zone is mainly within the Late Devonian quartz monzodiorite intrusions and augite basalt, also locally occurs in dacitic rocks. Intense quartz veining forms a lens up to 100 m wide hosted by augite basalt and partly by quartz monzodiorite. Although many explorations have been carried out, only a few scientific works were done in the Oyu Tolgoi mining area. Therefore the nature of copper-gold mineralization and orgin of the deposit is not fully understood. Copper-gold mineralization in the Hugo Dummett deposits occurs in dominantly quartz monzodiorite and minor augite basalt, dacitic rocks and locally biotite granodiorite. Chalcopyrite, pyrite, bornite, molybdenite, tennantite, tetrahedrite, enargite, sphalerite, chalcocite, covellite, eugenite, galena and gold occur as main ore minerals in the Hugo Dummett North and South deposits. These sulfides occur as: (1) a vague vein-like trail 1-3cm long and 2-3 mm wide, (2) minute, discontinuous cracks within quartz(micron scales), and (3) irregular blebs/spots(micron scales)and (4) disseminated within the sericite and plagioclase, commonly concentrated in the quartz. Sulfide minerals commonly display as a replacement, intergrown and minor exsolution texture in the both of the Hugo Dummet deposits.