• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.193-197
• /
• 2003

As one of the core technologies in the field of the optical communication with WDM, the optical cross connector with movements of micro mirrors is getting important day by day. The packaging structure of 2-dimensional NxN MOEMS switch should be determined by the harmonization of the following items such as the geometrical compatability between optical and structural components, the characteristics of optical input and output parts with device, and the electrical performance for the operation of micro mirrors. Therefore, the packaging process could be defined as the integrated technology completed by the optical and electrical science and the material science for the understanding of its thermo-mechanical properties with packaging materials. In the present study, the harmonization between the optical and structural components as well as the optical characteristics of lens system used will be investigated.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.32-39
• /
• 2013

All spacecraft components shall be checked for compatibility with vacuum using CVCM and TML in advance. CVCM and TML of the PZT-5 piezoelectric vibrator has to be less than 0.1% and 1.0% respectively. Also, it has less than $500ng/cm^2/hr$ of TQCM for vacuum bake-out test using high temperature and high vacuum. Thus, the piezoelectric vibrator may be employed in the vacuum environments. Finally, it can be confirmed that the characteristics change of the piezoelectric vibrator is less than 1% under vacuum environments. Also, the temperature dependency of the characteristics in the PZT-5 piezoelectric vibrator with the lateral mode was investigated in the range of $-100^{\circ}C$ to $90^{\circ}C$ using the thermal vacuum chamber to utilize the vibrator to the aerospace industries. As the results, at room temperature, the resonant and anti-resonant frequencies had the minimum value, whereas, the dielectric constant increased linearly from about 2500 to 7500 in the given temperature range. The mechanical loss decreased linearly from 0.08 to 0.03.

• Steel and Composite Structures
• /
• v.25 no.1
• /
• pp.117-126
• /
• 2017

The component method is an analytical approach for investigating the moment-rotation relationship of steel connections. In this study, the component method was improved from two aspects: (i) load analysis of mechanical model; and (ii) combination of spring elements. An optimized component method with more reasonable component models, spring arrangement position, and boundary conditions was developed using finite element analysis. An experimental testing program in two major-axis and two minor-axis connections under symmetrically loading was carried out to verify this method. The initial rotational stiffness obtained from the optimized component method was consistent with the experimental results. It can be concluded that (i) The coupling stiffness between column and beam flanges significantly affects the effective height of the tensile-column web. (ii) The mechanical properties of the bending components were obtained using an equivalent t-stub model considering the bending capacity of bolts. (iii) Using the optimized mechanical components, the initial rotational stiffness was accurately calculated using the spring system. (iv) The characteristics of moment-rotation relationship for beam to column connections were effectively expressed by the SPRING element analysis model using ABAQUS. The calculations are simpler, and the results are accurate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.185-196
• /
• 2009

SCA is proposed in order to operate various wireless systems in the single terminal platforms and uses the CORBA middleware to guarantee the platform-independence for software components. As the reconstruction demand is expanded in the software component to the logic level to many reasons, CORBA has to guarantee the independence of hardware on board. Accordingly. the characteristics depending on hardware board is ed. And the IDL-based interworking interface about the component has to be provided. In this paper, we described about local transport for guaranteeing the independency on the hardware board and the HAO Core for providing a coupling by the CORBA IDL identically with the other component. HAO produced at 2,900 logic cell size in average and provided the performance of the tens times than the software component. Through the use of HAO in the SCA-based development environment, it was naturally expanded to not only the software area but also the FPGA logic.

• Wind and Structures
• /
• v.18 no.4
• /
• pp.443-456
• /
• 2014

A popular modern architectural form for tall buildings is two (or more) towers which are structurally linked through such features as a shared podium or sky-bridges. The fundamental features of the wind loading and the structural links of such buildings can be studied by measuring load components on the individual unlinked towers along with their correlations. This paper describes application of dual high frequency force balance (DHFFB) in a wind tunnel study of the base wind loading exerted on generic tall twin buildings in close proximity. Light models of two identical generic tall buildings of square plan were mounted on DHFFB and the base wind loading exerted on the buildings was simultaneously acquired. The effects of the relative positions of the buildings on the correlations and coherences involving loading components on each building and on the two buildings were investigated. For some relative positions, the effects of the building proximity on the wind loading were significant and the loading was markedly different from that exerted on single buildings. In addition, the correlations between the loadings on the two buildings were high. These effects have potential to significantly impact, for example, the modally-coupled resonant responses of the buildings to the aerodynamic excitations. The presented results were not meant to be recommended for direct application in wind resistant design of tall twin buildings. They were intended to show that wind loading on tall buildings in close proximity is significantly different from that on single buildings and that it can be conveniently mapped using DHFFB.

• Textile Coloration and Finishing
• /
• v.33 no.1
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• Wind and Structures
• /
• v.34 no.2
• /
• pp.185-197
• /
• 2022

This study aimed to analyze the wind-induced mechanical energy (WME) of a proposed super high-rise and long-span transmission tower-line system (SHLTTS), which, in 2021, is the tallest tower-line system with the longest span. Anew index - the WME, accounting for the wind-induced vibration behavior of the whole system rather than the local part, was first proposed. The occurrence of the maximum WME for a transmission tower, with or without conductors, under synoptic winds, was analyzed, and the corresponding formulae were derived based on stochastic vibration theory. Some calculation data, such as the drag coefficient, dynamic parameters, windshielding areas, mass, calculation point coordinates, mode shape and influence function, derived from wind tunnel testing on reducedscale models and finite element software were used in calculating the maximum WME of the transmission tower under three cases. Then, the influence of conductors, wind speed, gradient wind height and wind yaw angle on WME components and the energy transfer relationship between substructures (transmission tower and conductor) were analyzed. The study showed that the presence of conductors increases the WME of transmission towers and changes the proportion of the mean component (MC), background component (BC) and resonant component (RC) for WME; The RC of WME is more susceptible to the wind speed change. Affected by the gradient wind height, the WME components decrease. With the RC decreasing the fastest and the MC decreasing the slowest; The WME reaches the its maximum value at the wind yaw angle of 30°. Due to the influence of three factors, namely: the long span of the conductors, the gradient wind height and the complex geometrical profile, it is important that the tower-line coupling effect, the potential for fatigue damage and the most unfavorable wind yaw angle should be given particular attention in the wind-resistant design of SHLTTSs

• Journal of KIISE:Software and Applications
• /
• v.35 no.2
• /
• pp.70-80
• /
• 2008

Today, businesses have to respond with flexibility and speed to ever-changing customer demand and market opportunities. Service-oriented architecture (SOA) is the best methodology for minimizing the complexity and the cost of enterprise-level infrastructure and for maximizing the productivity and the flexibility of an enterprise. Most of the enterprise-level SOA delivery strategies deal with the top-down approach, which organization has to define the business processes, to model business services, and to find the required services or to develop new services. However, a lot of peoples want to maximally reuse legacy component-based systems as well as to deliver SOA into their organizations. In this paper, we propose a bottom-up approach for identifying business services with proper granularity. It can improve the reusability and maintenance of services by considering not data I/O of components of legacy applications but GUI event patterns. Our proposed method is applied to MIS with 129 GUIs and 13 components. As a result, the valiance of the coupling value of components is increased five times and three business services are distinctly exposed. It also provides a 49% improvement in reducing the relationship problems between services over a service identification method using only partitioning information of components.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.186-195
• /
• 2000

In this paper, partial discharge (PD) measurement was performed to evaluate the quality of the cable joint and termination constructions. The resistive coupling technique for PD detection using resistivity of semiconducting layer of the cable in the accessories, such as joints and terminations. With high frequency PD (HEPD) measurement, an excellent sensitivity below 20pC could be achieved under unshielded condition. The localization of the defects in the accessories could be identified. During heating cycle, PDs were monitored and analyzed. At that time, the PDs were dependent on the temperature of the heating cycle and showed cyclic behaviors, which were attributed to local delamination of the interfaces, between epoxy unit and stress relief cone(SRC) and between SRC and cable, due to the difference of thermal expansion. As a conclusion, HFPD measurement technique was proven to be an effective diagnostic method for qualification of extra high voltage (EHV) cable accessories. With this technique, the optimal design of the components of the accessories could be verified not only in an early stage but also under operating condition. This technique would result in the improvement of the reliability of the EHV cable accessories.

• The Journal of Fisheries Business Administration
• /
• v.17 no.1
• /
• pp.41-76
• /
• 1986

The northeastern Pacific and eastern Bering Sea supports large and divers finfish and shellfish compelxes. The North Pacific fishing grounds are largest fish production total 30.89 percent of the world in 1983. Recent action by the around countries extending their fisheies jurisdiction to 200 mile has provided a new environment. The new approch to fisheries management has resulted in an arormous expansion in tile demand for scientific information. These are no longer limited to biological concerns. Emphasis has been focused recently on the need to understand the economic, social, politics and philosophy characteristics of a fishing and how they will be affected by management decisions. The horizontal management and portfolio management for fisheries has increased interest in complex biological models and the coupling of these models with economic, politics and phyisophy components. Successful completion of this task will require and expanded understanding of oceanographic, biological, economic, social, politics and philosophic process associated with fisheries. Particular attention should be devoted to acquiring information an data processing for Korean trawl fishery, stock assessment in the areas. The need for international collaboration in management must be stressed. Some northeast Pacific and eastern Bering Sea fish stock migrate over long distances and political boundaries. Further, nearly all the fish stocks are harvested by several nations. The features require cooperation and coordination of research activities. The horizontal management will be made a way these activities for the around countries in the sea. Strongly, tile proposed again, Pacific International Council for Exploration of the Seas, PICES will interest between all users of the area's fisheries.