• Nuclear Engineering and Technology
• /
• 제35권1호
• /
• pp.1-13
• /
• 2003

In this study, an effective method to estimate the fundamental frequencies of co-axial cylinders immersed in fluid is proposed. The proposed method makes use of the equivalent mass or density that is derived from the added mass matrix caused by the fluid-structure interaction (FSI) phenomenon. The equivalent mass is defined from the added mass matrix based on a 2-D potential flow theory. The theory on two co-axial cylinders extended to the case of three cylinders. To prove the validity of the proposed method, the eigenvalue analyses upon coaxial cylinders coupled with fluid gaps are peformed using the equivalent mass. The analyses results upon various fluid gap is conditions reveal that the present method could provide accurate frequencies and be suitable for expecting the fundamental frequencies of fluid coupled cylinders in beam mode vibration.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2213-2215
• /
• 2000

In this paper we implemented a novel re-entrant mode microstrip directional coupler for realizing the high directivity characteristic using finite element (FE) analysis. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional finite element(FE) analysis, the phase velocities for each mode and the design parameter were extracted for the proposed coupled-line configuration. Based on the extracted design parameter with phase matching condition we designed and fabricated 30dB directional coupler at 850MHz. Experimental results show good performance with excellent isolation.

• Journal of the Optical Society of Korea
• /
• 제6권3호
• /
• pp.108-116
• /
• 2002

Lasing modes of laser-diode-pumped fiber grating lasers are analyzed by coupled-mode theory. First, a power series solution of the coupled-mode equations is derived under the assumption of an exponentially-decreasing longitudinal modal gain profile for a laser-diode-pumped grating section, followed by determination of the transfer matrix for such a section. Based on these results, an eigenvalue equation for oscillation is then derived and solved numerically for the lasing modes of uniform and phase-shifted fiber grating lasers. Comparisons made with the uniform-gain results indicate that, surprisingly, the lasing mode characteristics are not as significantly altered as might be expected in most cases, even for a highly nonuniform gain profile. In the case of a phase-shifted grating, the phase-shift position appears to have a much greater impact on determining the threshold gain, the modal field distribution, and the front-to-back output power ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.600-604
• /
• 2013

A CTBA(Coupled Torsion Beam Axle) is a general type for rear suspension of small/compact sedans. It connects left and right knuckles using torsion beam axle and trails rear wheels. Therefore, a CTBA performs a main role of ride & handing. But, a CTBA suspension has main bending mode around 120Hz and causes road booming noise in the interior of a car. Therefore, the mode control of a CTBA is very important for reducing road noise. In this paper, we optimized the shape of a CTBA to reduce road noise considering R&H performance, simultaneously. The vibration mechanism of CTBA was investigated using ODS(Operational Deflection Shape) and mode shape.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.85-91
• /
• 2022

This study proposes a high efficiency bridgeless Power Factor Correction (PFC) converter with improved common mode noise characteristics. Conventional PFC has limitations due to low efficiency and enlarged heat sink from considerable conduction loss of bridge diode. By applying a Common Mode (CM) coupled inductor, the proposed bridgeless PFC converter generates less conduction loss as only a small magnetizing current of the CM coupled inductor flows through the input diode, thereby reducing or removing heat sink. The input diode is alternately conducted every half cycle of 60 Hz AC input voltage while a negative node of AC input voltage is always connected to the ground, thus improving common mode noise characteristics. With the aim to improve switching loss and reverse recovery of output diode, the proposed circuit employs Critical Conduction Mode (CrM) operation and it features a simple Zero Current Detection (ZCD) circuit for the CrM. In addition, the input current sensing is possible with the shunt resistor instead of the expensive current sensor. Experimental results through 480 W prototype are presented to verify the validity of the proposed circuit.

• 한국광학회지
• /
• 제15권2호
• /
• pp.149-157
• /
• 2004

문턱 전류 이상에서 complex-coupled(CC) DFB 레이저의 여러 가지 ｜$\chi$L｜과 양 단면 반사율 조합에 대하여 파워 추출 효율과 발진 파장 분포를 구하였고 문턱 전류에서의 결과와 비교하였다. 또한 결함 계수 비(CR)와 Ar 단면의 반사율이 파워 추출 효율과 발진 파장 분포에 미치는 영향에 대하여 살펴보았다. 문턱 전류에서 in-phase(IP) CC DFB 레이저와 anti-phase(AP) CC DFB 레이저의 파워 추출 효율에 대하여 도시한 단일 모드 수율은 정확히 일치하였다. 그러나 문턱 전류 이상에서는 IP CC DFB 레이저의 파워 추출에 대하여 도시한 단일 모드 수율은 AP CC DFB 레이저보다 크게 나타났다. IP CC DFB 레이저의 경우 양 단면 반사율 조합이 AR-HR의 경우가 다른 반사율 조합에 비해 단일 모드 수율이 크고 또한 파워 추출 효율이 큼을 알 수 있었다. 본 논문에서 고려한 경우 중에서 ｜$\chi$L｜이 0.8이고 AR-HR인 경우가 문턱 전류 이상에서 단일 모드 수율과 파워 추출 효율이 가장 컸다. 양 단면 반사율 조합이 AR-HR인 경우 CR이 커질수록, AR단면의 반사율이 작아질수록 spatial hole burning 현상이 완화되어 단일 모드 수율과 파워 추출 효율이 커졌다. 양 단면 반사율 조합이 AR-HR인 경우 CC DFB 레이저의 발진 파장은 DFB 금지 대역 내에 넓게 분포하였다. CR이 증가할수록 IP CC DFB 레이저는 장파장 모드에, AP CC DFB 레이저는 단파장 모드에 발진 파장 분포가 증가하였다. ｜$\chi$L｜이 커질수록 발진 파장이 존재하는 파장 폭이 작아 지고 발진 파장 분포가 장파장 쪽으로 이동하였다.

• 산업기술연구
• /
• 제16권
• /
• pp.239-245
• /
• 1996

Modal parameters determine the frequency response characteristics of vibration system or acoustic system. When the two systems are fully coupled, however, coupling changes the vibrational and acoustic model parameters into those of the coupled system. In this case, it is very difficult to obtain the modified model parameters and response characteristics. In this paper, coupling effect is analytically investigated on the natural frequency, mode and frequency response characteristics. The result can be applied to understand and to design the frequency response characteristics of the vehicle passenger compartment.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.87-92
• /
• 2002

A short-ended electromagnetically coupled coaxial dipole array antenna is investigated theoretically. The antenna has an advantage of structural simplicity. The integral equations are derived for the proposed structure by use of the Fourier transform and mode expansion, and the simultaneous linear equations are obtained. The slot electric field and strip current are obtained by solving the simultaneous linear equations. The effects of slot and strip numbers on the radiation efficiency, beamwidth and directivity gain of the antenna are presented.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.313-314
• /
• 2006

We have investigated the wavelength tuning characteristics due to the vernier effect of coupled-ring reflector laser diode including active region within resonators using time-domain modeling. It is shown that the wavelength can be widely tuned with side mode suppression ratio more than 30dB by adjusting the refractive index difference between mismatched rings.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.22-25
• /
• 1987

New measurement method of coupled transmission line characteristics is described. This method presents precision calculated values of even- and odd-mode impedances and effective dielectric constants of mictostrip parallel coupled lines from the scalar quantities obtained by transmission coefficients at two different resonance frequencies. Measured impedances and effective dielctric constants are good agreement with predicted values.