• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.45-55
• /
• 1999

파랑에 의한 불포화된 해저지반의 거동, 액상화와 전단파괴에 대한 연구이다. 불포화된 지반은 유체가 채워진 다공성 탄성체로 모델화 하였다. 유체의 흐름과 토립자의 변형은 Biot의 이론에 따른 지배방정식으로 나타내었다. 이 방정식은 준해석적 방법으로 풀어 불포화된 다층의 지반에 대하여 응력과 간극수압을 평가하였다 준해석적 방법은 기존의 해석방법과 달리 다층의 이방성 지반을 연속적으로 해석할 수 있다. 해석결과에 의하면, 지반의 포화도는 불포화된 다층의 지반에서 응력과 간극수압의 크기에 가장 큰 영향을 미치고 있는 것으로 나타났다. 또한, 해석결과를 토대로 지반의 액상화 발생과 전단파괴에 대한 검토를 실시하였으며, 그 결과 최대 전단파괴가 발생된 깊이가 최대 액상화 발생지역 보다 깊은 것으로 나타났다.

• Coupled systems mechanics
• /
• 제1권4호
• /
• pp.381-395
• /
• 2012

Dynamic response of Pile Supported Structures is highly depended on Soil Pile Structure Interaction. In this paper, by comparison of experimental and numerical dynamic responses of a prototype jacket offshore platform for both hinge based and pile supported boundary conditions, effect of soil-pile-structure interaction on dynamic characteristics of this platform is studied. Jacket and deck of a prototype platform is installed on a hinge-based case first and then platform is installed on eight skirt piles embedded on continuum monolayer sand. Dynamic characteristics of platform in term of natural frequencies, mode shapes and modal damping are compared for both cases. Effects of adding and removing vertical bracing members in top bay of jacket on dynamic characteristics of platform for both boundary conditions are also studied. Numerical simulation of responses for the studied platform is also performed for both mentioned cases using capability of ABAQUS and SACS software. The 3D model using ABAQUS software is created using solid elements for soil and beam elements for jacket, deck and pile members. Mohr-Coulomb failure criterion and pile-soil interface element are used for considering nonlinear pile soil structure interaction. Simplified modeling of soil-pile-structure interaction effect is also studied using SACS software. It is observed that dynamic characteristics of the system changes significantly due to soil-pile-structure interaction. Meanwhile, both of complex and simplified (ABAQUS and SACS, respectively) models can predict this effect accurately for such platforms subjected to dynamic loading in small range of deformation.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1035-1044
• /
• 2013

면내 하중을 지지하는 면재와 면외 하중을 지지하는 심재로 구성되는 샌드위치 패널 구조물은 높은 비강도와 비강성을 가지므로 경량화가 요구되는 대형 구조물에 자주 이용된다. 그러나, 이러한 구조물은 필연적으로 높은 하중에 대하여 유연성의 증가를 일으키게 되므로, 이에 대한 구조 안전성 분석이 이루어져야 한다. 이에 대해 실제 풍하중은 거스트 영향 등을 비롯한 비선형성을 가지는 요소들이 고려되어야 하며, 구조물의 안전성 분석을 위하여 입력 하중에 대해 보다 실제 물리현상에 근접하게 모사되어야 한다. 이에 이 연구에서는 유체-구조 연성해석 기법을 이용하여 대형 등격자-보강 패널 구조물에 대한 구조 안전성 분석이 수행되었다. 입력하중인 풍하중에 대하여 보다 실제적 모사를 위해 불규칙 변동 속도성분인 거스트 영향이 고려된 랜덤분포 풍하중에 대한 유동장을 생성하여 압력-변위 사상을 통하여 연성해석이 수행되었다.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.623-635
• /
• 2015

지하수위 아래에 건설되는 복층터널은 비교적 대단면이며 비배수 터널로 건설되는 특징을 가지고 있다. 지하수위 하부에 위치하는 터널은 지하수로 인해 발생하는 부력으로부터 터널의 안정성 확보방안이 필요하다. 일반적으로 터널 라이닝과 지반사이의 경계면에서의 결합력은 부력에 대해 충분한 안정성을 발휘한다. 그러나 장기적인 시간이 경과하면 구조물의 열화로 인하여 결합력이 감소할 수 있다. 본 연구에서는 장기적인 관점에서 부력으로 인한 복층터널의 영향을 조사하였다. 그 결과 부력으로 인해 터널 하단부분에서 변형과 라이닝에 작용하는 응력이 증가하였다. 본 연구로부터 운영중 터널의 라이닝과 지반사이의 결합력을 유지시킬 수 있는 방안이 필요함을 알 수 있다.

• 열처리공학회지
• /
• 제27권6호
• /
• pp.281-287
• /
• 2014

Microstructural and mechanical characteristics of Al-6Si-2Cu alloy for engine mount bracket prepared by gravity casting (as-cast) and die-casting (as-diecast) process have been investigated. For the microstructural characterization, the inductively coupled plasma mass spectrometry (ICP-MS), optical microscope (OM), scanning electron microscope (SEM) and electron probe microanalysis (EPMA) analyses are conducted. For the intermetallic phases, the X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) are also conducted with quantitative and qualitative analysis. Micro Vickers hardness and static tensile test are achieved in order to measure mechanical properties of alloys. Secondary dendrite arm spacing (SDAS) of as-cast and as-diecast show 37um and 18um, respectively. A large amount of coarsen eutectic Si, $Al_2Cu$ intermetallic phase and Fe-rich phases are identified in the Al-6Si-2Cu alloy. Mechanical properties of gravity casting alloy are much higher than those of die-casting alloy. Especially, yield strength and elongation of gravity casting alloy show 2 times higher than die-casting alloy. After shot peening, shot peening refined the surface grains and Si particles of the alloys by plastic deformation. The surface hardness value shows that shot peening alloy has higher value than unpeening alloy.

• Coupled systems mechanics
• /
• 제8권4호
• /
• pp.315-338
• /
• 2019

The numerical investigations have been carried out on reinforced concrete slab against blast loading to demonstrate the accuracy and effectiveness of the finite element based numerical models using commercial package ABAQUS. The response of reinforced concrete slab have been studied against the influence of weight of TNT, standoff distance, boundary conditions, influence of air blast and surface blast. The results thus obtained from simulations were compared with the experiments available in literature. The inelastic behavior of concrete and steel reinforcement bar has been incorporated through concrete damage plasticity model and Johnson-cook models available in ABAQUS were presented. The predicted results through numerical simulations of the present study were found in close agreement with the experimental results. The damage mechanism and stress response of target were assessed based on the intensity of deformations, impulse velocity, von-Mises stresses and damage index in concrete. The results indicate that the standoff distance has great influence on the survivability of RC slab against blast loading. It is concluded that the velocity of impulse wave was found to be decreased from 17 to 11 m/s when the mass of TNT is reduced from 12 to 6 kg. It is observed that the maximum stress in the concrete was found to be in the range of 15 to $20N/mm^2$ and is almost constant for given charge weight. The slab with two short edge discontinuous end condition was found better and it may be utilised in designing important structures. Also it is observed that the deflection in slab by air blast was found decreased by 60% as compared to surface blast.

• Coupled systems mechanics
• /
• 제8권5호
• /
• pp.439-457
• /
• 2019

In this paper, a new application of a four variable refined plate theory to analyze the nonlinear bending of functionally graded plates exposed to thermo-mechanical loadings, is presented. This recent theory is based on the assumption that the transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces, and similarly, the shear components do not contribute toward bending moments. The derived transverse shear strains has a quadratic variation across the thickness that satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. The solutions are achieved by minimizing the total potential energy. The non-linear strain-displacement relations in the von Karman sense are used to derive the effect of geometric non-linearity. It is concluded that the proposed theory is accurate and simple in solving the nonlinear bending behavior of functionally graded plates.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.551-561
• /
• 2022

In this paper, the effect of fire conditions according to ISO 834 standard on the behavior of carbon fibre-reinforced plastic (CFRP) reinforced steel beams coated with gypsum-based mortar has been investigated numerically. To study the efficiency of these beams, 3D coupled temperature-displacement finite element analyzes have been conducted. Mechanical and thermal characteristics of three different parts of composite beams, i.e., steel, CFRP plate, and fireproof coating, were considered as a function of temperature. The interaction between steel and CFRP plate has been simulated employing the adhesion model. The effect of temperature, CFRP plate reinforcement, and the fireproof coating thickness on the deformation of the beams have been analyzed. The results showed that within the first 120 min of fire exposure, increasing the thickness of the fireproof coating from 1 mm to 10 mm reduced the maximum temperature of the outer surface of the steel beam from 380℃ to 270℃. This increase in the thickness of the fireproof layer decreased the rate of growth in the temperature of the steel beam by approximately 30%. Besides excellent thermal resistance and gypsum-based mortar, the studied fireproof coating method could provide better fire resistance for steel structures and thus can be applied to building materials.

• Geomechanics and Engineering
• /
• 제34권2호
• /
• pp.209-220
• /
• 2023

In this study, a series of three-dimensional numerical analyses were carried out to investigate the penetration performance of a dynamically installed Hall anchor. The advanced coupled Eulerian-Lagrangian (CEL) technique was adopted to accurately simulate the large soil deformation during the vertical penetration of a Hall anchor. In total, 52 numerical analyses were conducted to investigate the relationship between anchor penetration depth and the initial kinematic energy. Moreover, a sensitivity analysis was performed to investigate the effects of soil shear strength and soil type on the penetration mechanism of a drop anchor under self-weight. There is a monotonic increase in the penetration depth with an increasing anchor weight when the topsoil of the riverbed is not subjected to erosion. On the other hand, all the computed depths significantly increase when soil erosion is taken into consideration. This is mainly due to an enhanced initial kinematic energy from an increased dropping depth. Both depths increase exponentially with the initial kinematic energy. An enhanced shear strength can potentially increase the side resistance and end-bearing pressure around a drop anchor, thus significantly reducing the downward penetration of a hall anchor. Design charts are developed to directly estimate penetration depth and associated plastic zone due to dynamically installed anchor at arbitrary soil shear strength and anchor kinematic energy.

• 해양환경안전학회지
• /
• 제22권1호
• /
• pp.82-89
• /
• 2016

본 연구에서는 국내 여수항만에 길이 500미터, 폭 200미터, 두께 2미터인 폰툰형 VLFS타입의 해상부두를 제안하였다. 이 구조물은 해상에서 오랫동안 파랑하중을 견뎌야하므로 파랑응답해석이 필수적이다. 유체-구조부 해석에는 직접법을 사용하였고, 연성운동방정식을 수치해석하여 응답 결과를 구하였다. 구조부는 유한요소법을 이용하여 계산하였으며, 유체부는 경계요소법을 사용하여 분석하였다. 탄성변형과 강체운동으로 인한 동적응답을 수치적으로 분석하였으며, 파장, 수심, 파향, 구조물의 강성 요소를 고려하여 규칙파에 대한 응답을 해석하였다. 연구의 결과, $L/{\lambda}$ 1.5를 기준으로 응답이 변화하였고, 입사파의 방향에 따라 비틀림 현상이 나타났다. $L/{\lambda}=8.0$의 경우 수심이 증가할수록 입사측에서의 응답이 증가하는 경향이 나타났고, 강성의 변화에 따라 수직변위진폭의 피크점이 좌우로 이동하였다.