• 한국환경과학회지
• /
• 제27권4호
• /
• pp.275-279
• /
• 2018

Water status of intact plants has been optically estimated by measuring reflectance at the wavelengths 1,450 nm and 1,900 nm based on their signal strengths. Although another water band at 970 nm is considered to have very small signals, the band apparently lies within the detection range of inexpensive spectrometer and plain charge-coupled device (CCD) camera used in wild fire studies. However measurement of the reflectance at 970 nm has been rarely applied to estimate the water status of dead plant materials such as fallen branch, twig, and leaf. To test the possibility of applying water reflectance at 970 nm to estimate the water content (WC) in leaf litter, the reflectance in various WC values were measured in the leaf litter of three Quercus species (Q aliena, Q aliena, Q mongolica, and Quercus variabilis). The results showed that the WC in the leaf litter can be determined by reflectance water index (WI) in the three Quercus species ($WC=1,450{\times}WI-1,378.8$, r=0.865). However, there was no interaction effect in the relationship between WI and WC among the litter of the three Quercus species.

• 대한전자공학회논문지SP
• /
• 제41권6호
• /
• pp.99-108
• /
• 2004

본 논문에서는 CCD(charge-coupled device) 영상 기반의 자동 표적 탐지 시스템(ATD System : Automatic Target Detection System)에 적합한 빠른 탐색 방법을 제안한다. 무기체계에서의 활용을 위해서는 빠른 연산이 주요한 변수인 만큼 이 논문에서는 적은 계산량으로 다양한 표적을 탐지할 수 있는 능력에 주안점을 두고 있다. 표적 훈련(train)단계에서는 구간별 수직 방향 프로젝션을 이용하여 1D의 템플릿을 구성하고 K-means clustering과 이진 트리 구조(binary tree structure)를 활용하여 실제 시험 단계에서 템플릿 정합하는 횟수를 최소화한다. 또한 Correlation-based Adaptive Predictive Search(CAPS)를 이용하여 각각의 템플릿에 적응적인 skip-width를 사용하여 탐색 속도를 높이고 클러터 제거 단계에서는 윤곽선으로부터 추출한 Fourier Descriptor계수를 비교함으로써 초기 탐지에서 타겟으로 오인된 클러터를 모양 정보에 기반해서 제거하는 방법을 사용한다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.389-395
• /
• 2007

기존의 필름 X-Ray 및 CCD(Charge Coupled Device) 방식은 공간적인 제약과 진단 시간이 많이 걸리는 단점이 있다. 본 논문에서는 기존 방식들의 단점을 보완할 수 있는 TFT-DXD 방식의 digital X-ray detector (DR1000C)를 이용한 고효율 의료 영상처리시스템을 구현하였다. 본 논문에서 제안하는 DR1000C를 이용한 의료용 영상처리시스템은 기존의 X-Ray 방식에 비해 공간 효율성이 높고 진단 시간이 짧아진다는 장점이 있다. 영상처리시스템에서 획득한 영상을 고화질로 만들기 위해 1900*1200의 해상도를 가지는 LCD 컨트롤 드라이버를 개발하였고, 영상의 성능향상을 위해 enhancement unsharp masking 기법을 제안하여, 기존의 방식과 비교하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권3호
• /
• pp.51-54
• /
• 2008

A novel stereolithography method using evanescent light has been proposed as a means to realize 100-nanometer resolution. An in-process measurement system with high accuracy has been introduced to the nanostereolithography apparatus. Specifically, an optical microscopic system was developed to monitor the exposure process and a confocal positioning system was established to improve the longitudinal positioning accuracy in the layer-by-layer process. A high-power objective lens, a tube lens, and a charge coupled device (CCD) were included in the optical microscopic system, whereas a laser, a high-power objective lens, a piezoelectric (PZT) stage, a condenser lens, a pinhole, and a photomultiplier (PMT) made up the confocal microscopic system. Two verification experiments were conducted, and the results indicated that the optical microscopic system had a horizontal resolution of 200 nm and that the confocal positioning system provided a depth resolution of 30.8 nm. These results indicate that nanostereolithography can be successfully performed with this system.

• 한국공간정보시스템학회 논문지
• /
• 제4권2호
• /
• pp.35-40
• /
• 2002

본 연구에서는 현재 개발되고 있는 차량측량시스템(또는 Mobile Mapping System)에서 사용하기 위한 CCD(Charge Coupled Device) 카메라 영상을 취득하는 프로그램을 개발하였다. 특히 2개의 고해상도 칼라영상을 동시에 취득하여 저장할 수 있도록 하여 수치사진측량 기법의 적용이 가능하도록 하였다. 본 연구에서 개발한 프로그램은 GPS-IMU의 장비와 결합하여 차량측량시스템을 이용한 각종 시설물의 3차원 위치 결정, 보존상태 파악 등에 보다 효율적으로 이유될 수 있을 것이다. 특히 현재까지 개발되어 활용중인 프로그램들이 흑백영상을 대상으로 하고 있는 반면 본 연구에서 사용하고 있는 영상은 고해상도의 칼라영상이기 때문에 대상물의 판독력을 높일 수 있어 차량측량시스템의 활용분야를 넓일 수 있을 것으로 기대된다.

• 한국태양에너지학회 논문집
• /
• 제24권4호
• /
• pp.11-18
• /
• 2004

A solar concentrator, named KIERDISH II, was built at KIER in order to investigate the feasibility of high temperature solar energy application system. The constructed concentrator is a dish type solar concentrator with a focal length of 4.68m and a diameter of 7.9m. To successfully operate KIERDISH II, optimal design of the absorber is very important and flux density distribution has to be known. The focal flux density distribution on the receiver was measured. We have observed the shape and size of flux images and evaluated percent power within radius. Flux density distribution is usually measured by a CCD(charge coupled device) camera and a radiometer. In this paper we present a flux mapping method to estimate the characteristic features of the flux density distribution in the focal region of solar concentrator. The minimum radius of receiver is found to be 0.15m and approximately 90% of the incident radiation is intercepted by receiver aperture.

• 한국광학회지
• /
• 제7권1호
• /
• pp.1-8
• /
• 1996

렌즈의 실시간 성능축정을 위하여 MTF측정장치에 CCD를 많이 사용하고 있다. 본 연구에서는 2차원 CCD를 복사기 렌즈의 실시간 MFT측정장치에 사용했을 때 CCD에 의한 각종 MTF특성을 분석하였다. CCD로 측정한 복사기 렌즈의 MTF는 2차원 CCD의 shift register가 배열된 방향과 셔터 속도, 광신호 증폭회로의 증폭률에 따라 다른 특성을 나타내었다. 광원의 밝기에 의한 MTF 값의 변화를 줄이기 위하여 축상면 및 비축상면에서 복사조도가 균일한 광원장치를 제작하였으며 MTF 값이 측정된 표준렌즈를 사용하여 복사기 렌즈용 실시간 MTF측정장치를 교정하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1194-1198
• /
• 2005

A computer vision system was designed and validated to recognize an individual Holstein cattle by processing images of their body patterns. This system involves image capture, image pre-processing, algorithm processing, and an artificial neural network recognition algorithm. Optimum management of individuals is one of the most important factors in keeping cattle healthy and productive. In this study, an image-processing system was used to recognize individual Holstein cattle by identifying the body-pattern images captured by a charge-coupled device (CCD). A recognition system was developed and applied to acquire images of 49 cattles. The pixel values of the body images were transformed into input data comprising binary signals for the neural network. Images of the 49 cattle were analyzed to learn input layer elements, and ten cattles were used to verify the output layer elements in the neural network by using an individual recognition program. The system proved to be reliable for the individual recognition of cattles in natural light.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2760-2769
• /
• 1996

The feedback control systems of welding process using visual information can improve weld qualities. However, it is very difficult to get the visual information of weld pool since the light intensity of welding arc is much stronger than that of the weld pool. To explore the possibility of extending the capability of automatic welding machines, a study of a closed loop controlled welding system consisted of a GTA welding machine, a vision system, a stepping motor system and a digital computer was undertaken. Particularly, in this system, a CCD camera with a long wavelength pass filter was used to get a better weld pool image. Subsequently, an image analysis technique has been developed to measure the weld pool width. Using this weld pool width measurement, a colsed loop control system adjusted welding speed to maintain a constant weld pool width.