• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.459-459
• /
• 2012

Recently, the discharge of global warming gases in dry etching process of TFT-LCD display industry is a serious issue because perfluorocarbon compound (PFC) gas causes global warming effects. PFCs including CF4, C2F6, C3F8, CHF3, NF3 and SF6 are widely used as etching and cleaning gases. In particular, the SF6 gas is chemically stable compounds. However, these gases have large global warming potential (GWP100 = 24,900) and lifetime (3,200). In this work, we chose C3F6O gas which has a very low GWP (GWP100 = <100) and lifetime (< 1) as a replacement gas. This study investigated the effects of the gas flow ratio of C3F6O/O2 and process pressure in dual-frequency capacitively coupled plasma (CCP) etcher on global warming effects. Also, we compared global warming effects of C3F6O gas with those of SF6 gas during dry etching of a patterned positive type photo-resist/silicon nitride/glass substrate. The etch rate measurements and emission of by-products were analyzed by scanning electron Microscopy (SEM; HITACI, S-3500H) and Fourier transform infrared spectroscopy (FT-IR; MIDAC, I2000), respectively. Calculation of MMTCE (million metric ton carbon equivalents) based on the emitted by-products were performed during etching by controlling various process parameters. The evaluation procedure and results will be discussed in detail.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1991-1997
• /
• 2019

In this manuscript, we present a method for the direct calculation of an ambient dose equivalent (H^* (10)) for the external gamma-ray exposure with an energy range of 40 keV to 2 MeV in an electronic personal dosimeter (EPD). The designed EPD consists of a 3 × 3 ㎟ PIN diode coupled to a 3 × 3 × 3 ㎣ CsI (Tl) scintillator block. The spectrum-to-dose conversion function (G(E)) for estimating H^* (10) was calculated by applying the gradient-descent method based on the Monte-Carlo simulation. The optimal parameters for the G(E) were found and this conversion of the H^* (10) from the gamma spectra was verified by using ²⁴¹Am, ¹³⁷Cs, ²²Na, ⁵⁴Mn, and ⁶⁰Co radioisotopes. Furthermore, gamma spectra and H^* (10) were obtained for an arbitrarily mixed multiple isotope case through Monte-Carlo simulation in order to expand the verification to more general cases. The H^* (10) based on the G(E) function for the gamma spectra was then compared with H^* (10) calculated by simulation. The relative difference of H^* (10) from various single-source spectra was in the range of ±2.89%, and the relative difference of H^* (10) for a multiple isotope case was in the range of ±5.56%.

• 대한조선학회지
• /
• 제27권1호
• /
• pp.35-44
• /
• 1990

근년에 이르러 에너지 절약형선(節約型船) 개발이 촉진됨에 따라 디이젤엔진이 대구경(大口徑) 장행정(長行程) 소수(小數)실린더 저회전수화(低回轉數化)함으로써 불균형(不均衡)모멘트가 커져서 특히 중형선(中型船)에 대해 저진동수영역(低振動數領域)의 선체진동(船體振動) 방진설계(防振設計)가 주요과제로 대두되고 있다. 자동차운반선(自動車運搬船)의 경우 구조적(構造的) 특성(特性) 및 선형기하학적(船型幾何學的)인 특성(特性)이 일반상선(一般商船)과는 매우 다르다. 본 논문에서는 선체상하진동(船體上下振動), 선체수평(船體水平) 비틂연성진동(聯成振動)에 대하여 보유추(類推)이론에 의거한 해석방법의 정립을 위하여 전기 특성을 고려한 적정한 모델링방법, 부가수질량(附加水質量) 및 동 중심(中心), 부가수질량(附加水質量) 극관성(極慣性) 모멘트, 단면(斷面)의 전단계수(剪斷係數) 등의 적정한 산정방법, 수평(水平) 비틂거동(擧動)의 연성도(聯成度), modal해석(解析) 즉 mode중 첩법에 의한 강제진동응답(强制振動應答)의 계산 등에 관하여 실선(實船)에 대한 수치실험적(數値實驗的) 계산예(計算例)를 통해 일련의 고찰을 거쳐 합리적인 해석방법을 제시하였다.

• 한국환경보건학회지
• /
• 제45권6호
• /
• pp.594-604
• /
• 2019

Objectives: This study developed and validated an analysis method of urinary metals and metalloids that can be applied inductively with coupled plasma mass spectrometry (ICP-MS). Methods: 0.3 mL of urine was used to analyze 25 metal and metalloid compounds using ICP-MS. The validation of the analytical method included linearity, accuracy, precision, and the calculation of detection limits. In addition, a comparison test was performed with the graphite furnace atomic absorption spectrometry (GF-AAS) method, which is the current standard method, with urine samples of 66 healthy subjects. Results: The linearities (R²) of calibration curves of all 25 compounds were ≥ 0.999. Of the 25 compounds, the intra-day and inter-day accuracy% of 17 and 20 met ≤15%, respectively. In addition, fifteen compounds showed ≤15% recovery% for certificated reference materials. Intraclass correlation coefficients of the comparison between the current methods and new methods in this study were 0.952 (p-value<0.001) and 0.911 (p-value<0.001) for urinary cadmium and mercury, respectively. Conclusion: This study proposes an efficient simultaneous methodology that can analyze multi elements in smaller sample amounts. More reproduction experiments are needed in the future.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.513-520
• /
• 2001

본 논문에서는 세층 마이크로스트립 유전체 기판을 이용한 방향성 결합기를 제안하고, 설계방법을 제시하였다. 제안된 구조는 re-entrant mode 결합기의 구조를 수정하여. 결합이 이루어지는 두 전송선로의 위에 한 층의 매질을 추가시키고 그 위에 부동도체를 위치시킨 형태이다. 이러한 구조는 기 모드 정전용량의 증가로 인해 높은 결합도를 얻을 수 있고, 각 모드별 유효 유전율의 차이가 크지 않기 때문에 정재파비, 격리도, 위상차 등에서도 우수한 특성을 얻을 수 있다. 우, 기 모드 해석 방법을 통해 임피던스, 유효 유전율, 결합계수 등을 계산하여 결합기를 설계하였다. 시뮬레이션 및 측정결과 제안된 구조가 기존의 구조보다 2dB 정도 높은 결합도를 가지고, 정재파비, 격리도, 위상 특성 또한 우수함을 알 수 있었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.129-132
• /
• 2008

병렬 전단벽구조의 이상적인 거동을 만족시키기 위한 대안의 하나로 철근콘크리트커 플링보에 전단 성능이 우수한 철골 플레이트를 매립하는 방안이 제시되었다. Lam의 연구에 의하면 플레이트를 보강한 시험체가 기존의 철근 콘크리트 커플링보에 비하여 내진성능이 매우 우수한 것을 제시하고 있다. 철골 플레이트 커플링보는 철골 부재와 철근콘크리트 부재로 구성된 합성구조이다. 따라서 철골 부재는 강구조 설계 기준에 의해 설계하고, 철근콘크리트 부재는 철근콘크리트 설계기 준에 의해 설계하여 중첩시키는 방법으로 설계한다. 그러나 아직까지 합성구조에 대한 설계 기준이 마련되어 있지 않은 이유로 본연구에서는 실무에서 쓰이는 기준식의 평가를 통하여 철골 커플링보의 안전성을 검토하고자 한다. 기존 연구의 데이터를 통계학적 분석방법을 이용하여, ACI 기준식과 BS 기준식을 각각 검증하였다. 분석 결과 철근콘크리트의 전단력과 철골 플레이트의 전단력을 중첩하여 계산하는 철골 플레이트 커플링보에 대한 현재의 실무에서의 설계방법은 기존의 실험결과와 비교하면 적절한 설계방법으로 판단된다.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제5권1호
• /
• pp.22-28
• /
• 2002

A New concept for the LNG-FPSO ship, with moonpool and bilge step in bottom, is proposed. This concept is investigated with regard to motion reduction and sloshing phenomena of the cargo and operation tanks. The principal dimensions of the ship are $L\timesb B\times D\times t(design)=270.0\times51.0\times32.32\times13.7(m)$, with a total cargo capacity of 161KT; a 98% loading condition is considered for this study. The moonpools and rectangular step at the bilge have been designed for the purpose of decreasing the motion within the tank. For the motion analysis, linearized three-dimensional diffraction theory, with the simplified boundary condition was used. The six-degree of freedom coupled motion responses were calculated for the LNG-FPSO ship. Viscous effects on the roll motion responses of a vessel were taken into account in this calculation program, using an empirical formula suggested by Himeno(1981). The case study for the moonpool size has been conducted using theoretical estimation and the experimental method. For the optimization of the moonpool size and effect of the bilge step, 9 cases of its size, both with and without bilge step, were involved in the study. no motion responses, especially roll motion, for the designed LNG-FPSO ships are much lower than those of other drill ships and shuttle tankers. The limit criterions are satisfied. To check the cargo tank and operation tank sizes, we performed a sloshing analysis in the irregular waves which focuses on the pressure distribution on the tank wall and the time history of pressure and free surface for No.2 and 5 tanks of LNG-FPSO with chamfers. Finally, optimum tank sire was estimated.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.9-20
• /
• 2018

Due to integrated stochastic wind and wave loads, the supporting platform of a Floating Offshore Wind Turbine (FOWT) has to bear six Degrees of Freedom (DOF) motion, which makes the random cyclic loads acting on the structural components, for instance the tower base, more complicated than those on bottom-fixed or land-based wind turbines. These cyclic loads may cause unexpected fatigue damages on a FOWT. This paper presents a study on short-term fatigue damage at the tower base of a 5 MW FOWT with a spar-type platform. Fully coupled time-domain simulations code FAST is used and realistic environment conditions are considered to obtain the loads and structural stresses at the tower base. Then the cumulative fatigue damage is calculated based on rainflow counting method and Miner's rule. Moreover, the effects of the simulation length, the wind-wave misalignment, the wind-only condition and the wave-only condition on the fatigue damage are investigated. It is found that the wind and wave induced loads affect the tower base's axial stress separately and in a decoupled way, and the wave-induced fatigue damage is greater than that induced by the wind loads. Under the environment conditions with rated wind speed, the tower base experiences the highest fatigue damage when the joint probability of the wind and wave is included in the calculation. Moreover, it is also found that 1 h simulation length is sufficient to give an appropriate fatigue damage estimated life for FOWT.

• 한국통신학회논문지
• /
• 제33권3A호
• /
• pp.256-268
• /
• 2008

본 논문에서는 다중 경로 레이리 페이딩 시변 채널 환경의 Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) 시스템에서 효율적으로 채널 변화를 추적할 수 있는 채널 추적방식을 제안하였다. 제안된 방식은 시변 채널에 대응할 수 있도록 블라인드 채널 예측기를 설계하였다. 또한 주파수 영역 채널 추정이 Minimum Mean Square Error (MMSE) 시간영역 채널 추정과 결합되어 있으며 이 방식은 매 OFDM 심벌마다 역행렬을 계산할 필요가 없다는 장점이 있다. 컴퓨터 시뮬레이션 결과 제안된 방식은 기존의 Li방식[4] 보다 성능이 우수함을 보였다. 도플러 주파수 100Hz 및 10-4 BER에서 Eb/No이득이 약 2.5 dB 정도 되었다. 도플러 주파수가 200Hz일 때 그 성능의 차이는 더욱 커졌다.

• 한국해양공학회지
• /
• 제31권4호
• /
• pp.274-280
• /
• 2017

Generally, global performance analysis in offshore platforms is performed using potential-based numerical tools, which neglect hydrodynamic viscous effects. In comparison with the potential theory, computational fluid dynamics (CFD) methods can take into account the viscous effects by solving the Navier-Stokes equation using the finite-volume method. The open-source field operation and manipulation (OpenFOAM) C++ libraries are employed for a finite volume method (FVM) numerical analysis. In this study, in order to apply CFD to the global performance analysis of a hull-mooring coupled system, we developed a numerical wave basin to analyze the global performance problem of a floating body with a catenary mooring system under regular wave conditions. The mooring system was modeled using a catenary equation and solved in a quasi-static condition, which excluded the dynamics of the mooring lines such as the inertia and drag effects. To demonstrate the capability of the numerical basin, the global performance of a barge with four mooring lines was simulated under regular wave conditions. The simulation results were compared to the analysis results from a commercial mooring analysis program, Orcaflex. The comparison included the motion of the barge, catenary shape, and tension in the mooring lines. The study found good agreement between the results from the developed CFD-based numerical calculation and commercial software.