• Journal of Korean Society of Steel Construction
• /
• v.16 no.3 s.70
• /
• pp.305-314
• /
• 2004

Many residential buildings and mixed-use (i.e., residential and commercial) buildings that are currently under construction in the country mainly consist of building clusters rather than single structures. Recent trends show single buildings that actually consist of two houses. The lower part of the building consists of a single dwelling space. However, the upper part of the building is split into two dwellings, considering the aspects of commercialism and appearance, such as ventilation and lighting. These tall and complex buildings not only have low mass and damping. They also depend on wind loads for their structural stability and serviceability, due to the interaction between the building groups and the wind. In architectural design, however, the interaction effects among neighboring houses within a building group have yet to be identified. In addition, it is difficult to predict these interaction effects. In this regard, this thesis aims to model patterns of architecture, which consist of two houses that are existing or under construction. Current structures are investigated by comparing their wind-reduced response interaction effects, based on the measured distance between two buildings, and the acceleration response through the wind tunnel test. The results of this study are expected to provide basic data for wind-induced response interaction effects of building groups. Furthermore, the outcomes are also intended to be used as data for more rational and economical structure design.

• Journal of Animal Science and Technology
• /
• v.52 no.2
• /
• pp.97-102
• /
• 2010

The objective of this study was to examine the suitability of genetic evaluation models using the integrated racing records collected from Gwacheon and Busan Gyeongnam racetracks. Results obtained are summarized as follows: In the short-distance races of 1,400 meters and less the records of finishing time at Gwacheon racetrack was superior, whereas, in the races of 1,800 meters and more it was superior in the records from Busan Gyeongnam racetrack. The effects of contemporary groups accounted for 42.7~70.2% of the total variation, and the effects of the individual race considering racing classes was the biggest in all racing distances. Heritabilities and repeatabilities for the finishing time were estimated in the range of 0.153-0.238 and 0.401-0.498, respectively. Correlation coefficients between the breeding values estimated from the integrated records and the breeding values estimated from records of Gwacheon and Busan-Gyeongnam were 0.907 and 0.803, and coefficients of rank correlations were 0.891 and 0.846, respectively. The correlation coefficients between sire's annual earning of the integrated records and Gwacheon and Busan Gyeongnam racetracks records were 0.943 and 0.886, and coefficients of rank correlations were 0.938 and 0.853, respectively. Also, the correlation coefficient of sire's annual earning between Gwacheon and Busan Gyeongnam racetracks was 0.742. The results of this analysis indicate that the genetic evaluation using the integrated racing records are reliable when the racing records from Busan Gyeongnam racetracks are stabilized and more data are accumulated.

• Journal of the Economic Geographical Society of Korea
• /
• v.6 no.1
• /
• pp.119-144
• /
• 2003

This study attempts to figure out the impact of Information and communication technologies (ICTs) on spatial structure and to speculate on spatial strategies in the electronic economy from a geographical perspective. The unprecedented development of ICTs based on the explosive use of the Internet was enough to lead to the expectation that physical distance would not be a significant barrier in business activities. In fact, however, at least at a current stage, the development of ICTs has not automatically removed the inequality in spatial structure. The accessibility to electronic space is different by economic and social status within a country as well as between countries. The importance of place, locality, and place-specific assets has been strengthened in the global economy. Physical proximity is still of great importance because it helps to minimize transaction costs, to exploit place-specific social networks, and to accumulate credibility for successful businesses. Likewise, the development of electronic commerce such as B2B and B2C EC also does not necessarily result in the ignorance of place and locality. Rather, the recognition of the importance of spatial strategies is extremely important for the success in online businesses. As a conclusion, the spatial dimension becomes more important in the digital era for successful businesses and balanced regional developments than ever before. The need for the improvement of ICT infrastructures, the development of human resources, and the establishment of regional innovation systems in peripheral areas cannot be overemphasized even in the digital era.

• International Journal of Highway Engineering
• /
• v.13 no.1
• /
• pp.185-195
• /
• 2011

Aircraft-related accidents cause mass casualties and major material damages. At present, runway-related accidents in our country account for 28% of all air accidents. Furthermore, internationally 33% of all air accidents is connected with runway. To prevent these accidents, FAA mandates the installation of aircraft rapid arresting system(ARAS) at the runway end safety areas which do not meet the FAA requirements. Even if the areas satisfy the conditions, FAA recommends the installation of ARAS to ensure the safety. In accordance of the international affairs, the domestic studies for ARAS are in progress and the legal formalities for domestic adoption of ARAS is under way. In this study, we analyzed the stopping distance, drag force, vertical force and tire penetration of runway overrun to assess the performance of ARAS reasonably by using two different kinds of analysis programs. The first is ARRESTOR program adopted by FAA, and the second is LS-DYNA which is available for 3-dimensional nonlineal dynamic analysis. As a result, analytically the stopping distances between two programs are similar. The drag force is rather different, but the tendencies are similar. Later on, the 3-dimensional simulation analysis considering various air-craft condition and properties of packaging materials is necessary. In addition, ongoing development of simulation analysis program is required for more accurate analistic results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.169-180
• /
• 2019

Shorelines should be extracted with consistency because they are the reference for determining the shape of a country. Even in the same area, inconsistent minimum vertex intervals cause inconsistencies in the coastline length, making it difficult to acquire reliable primary data for national policy decisions. As the shoreline length cannot be calculated consistently for shorelines produced by determining the arbitrary distance between points below 1m, a methodology to calculate consistent shoreline length using the minimum vertex interval is proposed herein. To compare our results with the shoreline length published by KHOA(Korea Hydrographic and Oceanographic Agency) and analyze the change in shoreline length according to the minimum vertex interval, target sites was selected and the grid overlap of the shoreline was determined. Based on the comparison results, minimum grid sizes and the minimum vertex interval can be determined by deriving a polynomial function that estimates minimum grid sizes for determining consistent shoreline lengths. By comparing public shoreline lengths with generalized shoreline lengths using various grid sizes and by analyzing the characteristics of the shoreline according to vertex intervals, the minimum vertex intervals required to achieve consistent shoreline lengths could be estimated. We suggest that the minimum vertex interval methodology by quantitative evaluation of the determined grid size may be useful in calculating consistent shoreline lengths. The proposed method by minimum vertex interval determination can help derive consistent shoreline lengths and increase the reliability of national shorelines.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.171-178
• /
• 2016

An aircraft in flight and ATC(: Air Traffic Controllers) working in the Ground Control Center carry out a voice communication using the radio. Voice signal to be transmitted from the aircraft is received to a plurality of terrestrial sites around the country at the same time. The ATC receives the various quality of voice signal from the aircraft depending on the distance, speed, weather conditions and adjusted condition of the antenna and the radio. The ATC carries out a voice communication with aircraft in the optimal conditions finding the best voice signal. However, the present system chooses the values of the CD(: Carrier Dectect) which is determined to be superior to, based on the input voice level, as optimal channel. Thus this system can not be seen to select the optimal channel because it doesn't consider the effect of the noise which influences on the communication quality. In this paper, after removing the noise in the voice signal, we could give the digitized information and an improved voice signal quality, so that users can select an optimal channel. By using it, when operating the training eavesdropping system or the aircraft control, we can expect prevention accident and improvement of training performance by selecting the improved quality channel.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.193-201
• /
• 2020

The purpose of this study is to evaluate the photon characteristics according to the material and thickness of the electrons incidented through a linear accelerator. The computer simulation design is a linear accelerator target consisting of a 2 mm thick tungsten single material and a 1.8 mm and 2.3 mm thick tungsten and copper composite material. In the research method, First, the behavior of primary particles in the target was evaluated by electron fluence and electron energy deposition. Second, photons occurring within the target were evaluated by photon fluence. Finally, the photon angle-energy distribution at a distance of 1 m from the target was evaluated by photon fluence. As a result, first, electrons, which are primary particles, were not released out of the target for electron fluence and energy deposition in the target of a single material and a composite material. Then, electrons were linearly attenuated negatively according to the target thickness. Second, it was found that the composite material target had a higher photon generation than the single material target. This confirmed that the material composition and thickness influences photon production. Finally, photon fluence according to the angular distribution required for shielding analysis was calculated. These results confirmed that the photon generation rate differed depending on the material and thickness of the linear accelerator target. Therefore, this study is necessary for designing and operating a linear accelerator use facility for container security screening that is being introduced in the country. In addition, it is thought that it can be used as basic data for radiation protection.

• Management & Information Systems Review
• /
• v.37 no.2
• /
• pp.87-108
• /
• 2018

This article explores the international trade flow of Bangladesh's ready-made garments (RMG). We first suggest the brief history and an international structure of trade among countries by using the trade volume. Then we implemented a gravity model regression with the sample of 38 major partner countries in order to investigate the potential export market for the RMG industry. The fixed effect and random effect model for the panel data during the period of 1990 to 2011 are estimated. Our result shows that Bangladesh's RMG exports are affected positively by the size of economy, inflation, exchange rate, foreign direct investment(FDI) and trade openness. On the other hand, the distance between trading partners are related negatively with the trade volume. We used the estimated coefficients from the panel regression in order to predict RMG export potential of Bangladesh. This might show which country is the promising export market for Bangladesh RMG industry. We found that Bangladesh has the highest potential of RMG export with Japan and USA, which seem to have considerable room for export growth if trade barriers and constraints are removed. We added some policy implications for encouraging the RMG export of Bangladesh by using the results from the analysis.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.405-415
• /
• 2011

The primary purpose of this paper is to identify the influencing factors on the new products adoption between countries and generations. For this purpose, a research is developed based on the relevant literature reviews. Data have been collected from 524 persons and were tested by t-test and various statistical methods. The results of this empirical study are summarized as follows. In the cultural factors, the groupism has high discretion in China old generation. The materialism and shopping preference have high discretion in two young generations. There is no difference between the two groups in the distance of power. In innovativeness of personality, Korea and China young generation have high discretion. Innovativeness has high discretion in Korea and China youngs. Cognition and sensory innovativeness are has low discretion in Korea old. In the social risk perception, physiological, functional general and financial risk has high discretion in China old. In risk reducing behavior, the normative taking level and ad, new product adoption has high discretion in Korea and China youngs. But, the influence of others has high discretion in China old generation. The safety and brand reputation are no influences. The findings have a several marketing strategies in generation and countries.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.864-867
• /
• 2003

GPS (Global Positioning System) made by the Department of Defense in U.S.A is positioning system to use satellite and initially it has been used only for the military forces but open to civilian in about 1987. This system has widely been used for not only surveying land, but also car navigation on the street and means to build up the data of the GIS. With GPS, recently our country is accelerating to make imbeded system and also the study on imbeded system is well under way. For example, Car navigation and the construction of the Seokang bridge between Willson Arch at Han river by using DGPS were evaluated as successful model to lead accurate location with the precision of the cm. The examples of the project performance with GPS has gradually been extended to the each department organization of the local and central government. for the example, It is true that BIS(Bus Information System) is widely spreading out. In addition, the study on the Distribution Maintenance System is expected to be well in progress to take advantage of GPS based on the data base of the NGIS(National Geography Institute System) of the NGI(National Geography Institute). This paper shows that we embodied not only the large imbeded system for car and finding the location in Korean Land Corporation but also the protype of the kinematics Wrist Held which is easily portable to pedestrian, climber and marathon runner.