• 한국콘텐츠학회논문지
• /
• 제13권4호
• /
• pp.389-398
• /
• 2013

본 연구는 산업보안활동을 수행함에 있어, 운영 수준의 관리대책에 대한 전략적 우선순위 결정을 통해 합리적인 보안투자 의사결정 지원을 목적으로 하였다. 이를 위해 산업보안전문가들을 대상으로 AHP 설문조사를 시행, 분석하여 산업보안 관리대책들의 중요도와 우선순위를 결정하였다. 상위기준 비교평가에서는 'ICT서비스 사용관리'가 가장 높은 가중치(0.54)를 보였다. 하위기준은 중요도 순으로 3개 그룹으로 구분할 수 있었다. 민감도 분석결과, 'ICT시스템/통신망 접근통제'의 가중치를 2배 높이면 그 하위기준인 '운영체제 접근통제', '애플리케이션 접근통제', '유무선 네트워크 접근통제'의 전체 순위가 상위권으로 진입하였다. '물리/환경적 보안'의 가중치를 2배 높이면 그 하위기준인 '보호구역 설정 및 출입/접근통제'와 '업무설비방재/대테러 보호 배치'는 전체 순위가 상위권으로, '전원 등 유틸리티 상시 확보'는 중위권으로 상승함을 확인할 수 있었다.

• 한국전문물리치료학회지
• /
• 제23권3호
• /
• pp.40-47
• /
• 2016

Background: Assessments of Sit-to-Stand (STS) and gait functions are essential procedures in evaluating level of independence for the patients after stroke. In a previous study, we developed the software to analyze center of pressure (COP) in standing position on Wii Balance Board (WBB). Objects: This purpose of this study is to measure test-retest reliability of ground reaction forces, COP and time using WBB on STS and gait in healthy adults. Methods: Fifteen healthy participants performed three trials of STS and gait on WBB. The time (s), vertical peak (%) and COP path-length (cm) were measured on both tasks. Additionally, counter (%), different peak (%), symmetry ratio, COP x-range and COP y-range were analyzed on STS, 1st peak (%), 2nd peak (%) of weight were analyzed on gait. Intra-class correlation coefficient (ICC), standard error measurement (SEM) and smallest real difference (SRD) were analyzed for test-retest reliability. Results: ICC of all variables except COP path-length appeared to .676~.946 on STS, and to .723~.901 on gait. SEM and SRD of all variables excepting COP path-length appeared .227~8.886, .033~24.575 on STS. SEM and SRD excepting COP path-length appeared about .019~3.933, .054~11.879 on gait. Conclusion: WBB is not only cheaper than force plate, but also easier to use clinically. WBB is considered as an adequate equipment for measuring changes of weight bearing during balance, STS and gait test which are normally used for functional assessment in patients with neurological problems and elderly. The further study is needed concurrent validity on neurological patients, elderly patients using force plate and WBB.

• 치과방사선
• /
• 제20권1호
• /
• pp.53-62
• /
• 1990

This experiment was performed to clarify the effects of /sup 60/Co gamma irradiation on secretory function, amylase activity and contents of nucleic acids of parotid gland in rat. Experimental animals were divided into 6th hours, 3rd, 7th, 14th and 28th days after irradiation and control. The experimental animals are singly irradiated with 20Gy (2,000rad) through protective lead block. Secretory function of parotid gland was evaluted by uptake and clearance of /sup 99m/TcO₄. /sup 99m/TcO₄. 0.2μ ci/gm, was injected into peritonium in uptake groups. Rats were sacrified with cervical dislocation after 30 minutes and gland was excised. In the clearance group. pilocarpine nitrate (8㎎/㎏) was intraperitoneally injected at 30 minutes after /sup 99m/TcO₄ injection and rats were sacrified 30 minutes after pilocarpine injection. Radioactivity of excised parotid gland was measured by using of gamma counter and stimulation-secretion coefficients, uptake radioactivity divided by clearance radioactivity, was calculated. Amylase activity and contents of DNA and RNA were determined by spectrophotometry. The results obtained were as follows: 1. In the uptake test, the radioactivity of /sup 99m/TcO₄ per unit weight increase in experimental group except 6th hours group, compared with control groups and showed a peak at 3rd days after irradiation. 2. In the clearance test, the radioactivity of /sup 99m/cO₄per unit weight rose to a peak at 3rd days after irradiation and gradually recovered thereafter. 3. Stimulation-secretion coefficient of parotid gland decreased at 6th hours, 3rd and 7th days after irradiation, and gradually increased. 4. Amylase activity of parotid gland decreased in 3rd and 7th days group, and especially lowest in 3rd days after irradiation. 5. The contents of DNA showed no definite difference in all the experimental groups, but RNA was seemed to decrease with time after irradiation.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.56-63
• /
• 2019

최대이륙중량 600 kg급의 멀티콥터형 PAV(Personal Air Vehicle)에 사용될 프로펠러의 성능해석을 하였다. 배터리의 중량을 고정하고 최대중량 변화에 따른 정지비행 가능 시간을 추정하기 위하여 Actuator disc 해석과 CFD 해석을 병행하여 수행하였고 결과를 비교하였다. 동축반전형 프로펠러 사이의 유동간섭 영향을 고려하기 위하여 유도동력 간섭계수(kint)를 도입하였고, 이를 이용하여 하나의 프로펠러에 대한 해석 결과로 동축 반전 프로펠러의 성능을 추정하였다. 피치각을 변화시키며 전산해석을 수행하여 Figure of Merit (FM)이 최대가 되는 피치각의 범위를 찾았으며 요구추력에 대한 프로펠러의 설계 RPM을 역 추적하였다. 연구결과는 현용 배터리의 비에너지 밀도로 대형 멀티콥터의 비행시간은 매우 한정적이며 프로펠러 간섭계수의 값을 줄이기 위한 피치 및 프로펠러 간격 설정이 중요하다는 것을 보여준다.

• Advances in nano research
• /
• 제14권5호
• /
• pp.435-442
• /
• 2023

Sports activities, including playing tennis, are popular with many people. As this industry has become more professionalized, investors and those involved in sports are sure to pay attention to any tool that improves athletes' performance Tennis requires perfect coordination between hands, eyes, and the whole body. Consequently, to perform long-term sports, athletes must have enough muscle strength, flexibility, and endurance. Tennis rackets with new frames were manufactured because tennis players' performance depends on their rackets. These rackets are distinguished by their lighter weight. Composite rackets are available in many types, most of which are made from the latest composite materials. During physical exercise with a tennis racket, nanocomposite materials have a significant effect on reducing injuries. Materials as strong as graphite and thermoplastic can be used to produce these composites that include both fiber and filament. Polyamide is a thermoplastic typically used in composites as a matrix. In today's manufacturing process, materials are made more flexible, structurally more vital, and lighter. This paper discusses the production, testing, and structural analysis of a new polyamide/Multi-walled carbon nanotube nanocomposite. This polyamide can be a suitable substitute for other composite materials in the tennis racket frame. By compression polymerization, polyamide was synthesized. The functionalization of Multi-walled carbon nanotube (MWCNT) was achieved using sulfuric acid and nitric acid, followed by ultrasonic preparation of nanocomposite materials with weight percentages of 5, 10, and 15. Fourier transform infrared (FTIR) and Nuclear magnetic resonance (NMR) confirmed a synthesized nanocomposite structure. Nanocomposites were tested for thermal resistance using the simultaneous thermal analysis (DTA-TG) method. scanning electron microscopy (SEM) analysis was used to determine pores' size, structure, and surface area. An X-ray diffraction analysis (XRD) analysis was used to determine their amorphous nature.

• 정보보호학회논문지
• /
• 제33권6호
• /
• pp.919-928
• /
• 2023

딥러닝 기술은 자율 주행 자동차, 이미지 생성, 가상 음성 구현 등 다양한 분야에서 활용되고 있으며 하드웨어 장치에서 고속 동작을 위해 딥러닝 가속기가 등장하게 되었다. 그러나 최근에는 딥러닝 가속기에서 발생하는 부채널 정보를 이용한 내부 비밀 정보를 복구하는 공격이 연구되고 있다. 본 논문에서는 DNN(Deep Neural Network) 기반 MNIST 숫자 분류기를 마이크로 컨트롤러에서 구현한 후 상관 전력 분석(Correlation Power Analysis) 공격을 시도하여 딥러닝 가속기의 가중치(weight)를 충분히 복구할 수 있음을 확인하였다. 또한, 이러한 전력 분석 공격에 대응하기 위해 전력 측정 시점의 정렬 혼돈(misalignment) 원리를 적용한 Node-CUT 셔플링 방법을 제안하였다. 제안하는 대응책은 부채널 공격을 효과적으로 방어할 수 있으며, Fisher-Yates 셔플링 기법을 사용하는 것보다 추가 계산량이 1/3보다 더 줄어듦을 실험을 통해 확인하였다.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.167-174
• /
• 2015

Purpose : The purpose of this study was to investigate the effects of loaded vertical jumps on the following vertical jumps and to find how long the transient effect of warm-ups would continue. Methods : Twelve healthy college male students, majoring in physical education, participated in this study voluntarily. They performed three sets of unloaded jumps (pre-jump, 5% post jump, and 10% post jump) and two sets of loaded jumps (5% and 10% loaded jumps) according to the counter-balanced order. At each set, three trials of maximal vertical jumps were performed by a 30 second interval between trials and a 3 minute break after warm-up jumps. Force platform and motion capturing system were used to record motions and ground reaction force. Results : Only 5% post-warm-up jumps ($48.29{\pm}2.06cm$) showed significant increase in the jump height compared with pre-warm-up jumps ($47.35{\pm}2.21cm$). The transient effects of loaded warm-ups disappeared 4 minutes after loaded jumps. Conclusion : Conclusively, a decent amount of loading (around 5% extra of body weight) during sport specific warm-ups would give a positive, transient effect on the performance of the vertical jump.

• 한국전문물리치료학회지
• /
• 제18권2호
• /
• pp.76-83
• /
• 2011

The aim of this study was to determine the immediate effects of single treatment of strain-counter strain (SCS) on pressure pain threshold (PPT) and muscle activity during scapular plane abduction with 3% body weight load. Fifteen asymptomatic male adults with upper trapezius latent trigger point (LTrP) (PPT<2.9 $kg/cm^2$) participated in this study. Pressure algometer was used to measure PPT and surface electromyography was used to record upper, middle arid lower trapezius, serratus anterior, infraspinatus and middle deltoid muscle activity and relative ratio during scapular plane abduction between pre- and post-intervention. There was a significant increase in upper trapezius PPT after a 90-second SCS (p<.05). The activity of the upper trapezius and middle deltoid was significantly decreased (p=.014, p=.001), coupled with a decreased muscle activity ratio between the upper and lower trapezius (p<.05). These results indicate that the SCS may effectively deactivate upper trapezius activity, thereby alleviating muscle balance and reducing pain sensitivity.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2011년도 정기 학술발표대회
• /
• pp.70-70
• /
• 2011

사장교의 적용지간이 증가하여 초장대화하면서 구조안전성을 확보하기 위한 다양한 노력이 시도되고 있다. 본 연구에서는 현재까지 시도된 적이 없는 주경간 1,200m 사장교의 내풍안정성을 검토하기위하여 3차원공탄성 모형을 제작하고 풍동실험을 수행하였다.(그림1 참조) 실험대상 구조물은 내풍안정성 증대를 위해 유선형 박스거더를 채용하고 케이블이 거더와 함께 비틀림에 저항하도록 2면 케이블을 적용하였다. 구조적인 측면에서는 보강형 자중감소를 위해 전경간을 강박스로 계획하였으며 측경간에 부반력제어를 위한 Counter Weight을 적용하였다. 실험대상 구조물은 완성계, 가설계95%, 가설계50%, 가설계45%로 모형을 해체하면서 진행하였고 가설단계 별로 내풍케이블의 수량과 형상을 달리하여 내풍안정성 개선효과를 확인하고자 하였다. 3차원 풍동실험 결과 완성계에서 교량의 안전성에 심각한 문제를 발생시킬 수 있는 와류진동, 플러터, 버페팅과 같은 유해한 진동현상이 발견되지 않았으며, 시공중 내풍안정성 확보를 위하여 대상교량에 내풍케이블을 설치하고 내풍케이블의 수량 및 배치형상에 따른 진동제어 효과를 검토하였다. 본 실험은 현재 풍동실험 요소기술을 이용하여 1,200m급 사장교 풍동실험을 수행하였고 이에 따라 교량이 초장대화 되면서 스케일다운에 따른 보강형질량, 케이블 간격 등 실험모형 제작상 문제점을 확인 할 수 있었으며 이러한 경험을 토대로 향후 1,000m 이상급 초장대 사장교 내풍설계를 위한 기초자료로 활용이 가능할 것으로 사료된다.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3962-3969
• /
• 1975

1. When the frame of the experimental apparatus was directly fixed on the platform, result from the spectrum density analysis showed that the generated vibration frequecy of the system was nearly-same as the system's own characteristic vibration frequency, 80Hz, in the case of the forcing vibration frequency was 7.5 to 22.5Hz. The reduction ratio of acceleration by balanced type model compare to non-balanced type one was 26.66 percent. 2. When the frame of experimental apparatus was fixed on the platform with putting a shock absorbing rubber between the frame and the platform, the generated vibration frequency of the system was same as forcing vibration frequency. When either frequency or the amplitude of the forcing vibration was increased, the acceleration ratio was increased too. The average reduction ratio was resulted 44.77 per cent. It was concluded that this method of acceleration measurement(the method using a shock absorbing rubber) was a reaonable method, because actual machine will work under such condition. As the vibration frequency and aptitude were increased, the absolute magnitude of acceleration was increased. 3. unbalanced rotating parts, and unbalanced moment of inertia of links were supposed to be causing factors of residual vibration in spite of using the balanced type oscillating mole drainer. This fact suggested that the attachment of the counter weight on the rotating parts which satisfy the condition mw$.$rw=m0e, was necessary. And also, it was expected that the shock absorbing effect could be improved by putting the shock absorbing materials between the moving parts and their supports.