• The Korean Journal of Community Living Science
• /
• v.27 no.3
• /
• pp.509-520
• /
• 2016

This study was carried out to investigate the effects of adding rosemary extract powder (REP) to pork teokgalbi on its quality and storage characteristics. Five types of teokgalbi were tested, viz. with no REP added (normal, N), with 0.05% ascorbic acid added (control, C) and with 0.05% (R1), 0.1% (R2) and 0.2% (R3) of REP added. The proximate composition, calorific value, water holding capacity and cooking loss were not significantly different among the different types of pork teokgalbi. The L and a values of the teokgalbi containing REP were significantly lower than those of the N and C groups. As regards the textural characteristics, the addition of 0.2% REP increased the springiness value. In the sensory evaluation, the teokgalbi with the addition of 0.1% REP had higher scores in flavor and total acceptability. The 2-thiobarbituric acid (TBA) value, total microbial count and volatile basic nitrogen content of the teokgalbi containing 0.2% REP were lower than those of the N group. In conclusion, R3 was significantly more effective in delaying lipid peroxidation than the other treatment groups. Therefore, rosemary extract could be used as a natural antioxidant in meat products.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.5
• /
• pp.1929-1950
• /
• 2020

Reliable and secure data transmission in the application environment assisted by the wireless sensor network is one of the major challenges. Problem like blind forwarding and data inaccessibility affect the efficiency of overall infrastructure performance. This paper proposes routing protocol for forwarding and error recovery during packet loss. The same is achieved by energy and hops distance-based formulation of the routing mechanism. The reachability of the intermediate node to the source node is the major factor that helps in improving the lifetime of the network. On the other hand, intelligent hop selection increases the reliability over continuous data transmission. The number of hop count is factor of hop weight and available energy of the node. The comparison over the previous state of the art using QualNet-7.4 network simulator shows the effectiveness of proposed work in terms of overall energy conservation of network and reliable data delivery. The simulation results also show the elimination of blind forwarding and data inaccessibility.

• Korean Journal of Veterinary Research
• /
• v.38 no.3
• /
• pp.629-641
• /
• 1998

This study was performed to evaluate the ultrasonographic findings of ethylene glycol intoxication. Ten healthy mongrel dogs which was administered with ethylene glycol, were evaluated in terms of clinical findings, hematological findings, blood chemistry, and ultrasonographic and histopathological findings of kidney. The results obtained through these experiment could be summarized as follows : 1. Typical clinical symptoms such as vomiting, initial apprehension, depression, thirst, dehydration, tremor, anorexia, hematuria, anuria, weakness, weight loss, flaccid paralysis, tachypnea, coma, and death, were revealed after administration of ethylene glycol. 2. Special symptom of bloody diarrhea was occurred by administration of ethylene glycol. 3. After administration of ethylene glycol, PCV was decreased continuously(p<0.01), and total leukocyte count was increased gradually, revealed the highest value at day 5 and thereafter decreased. 4. Remarkable changes of ultrasonographic findings such as high echo intensity of renal parenchyma and emergence of halo in corticomedullary junction, were revealed after administration of ethylene glycol. Early(hour 8) enlargement and late(day 3) enlargement were observed in kidney(p<0.01). Especially, late enlargement was observed concurrently with the elevation of BUN and creatinine values. 5. Calcium oxalate crystals, metabolites of ethylene glycol, were observed in histopathologic findings of kidney. Also, degeneration and necrotic exfoliation of epithelial cells were recognized in addtion to swelling of renal tubules.

• Korean Journal of Community Nutrition
• /
• v.8 no.4
• /
• pp.574-583
• /
• 2003

The purpose of this study was to investigate the anthropometry, biochemical parameters and electrolytes concentrations of the Total Parenteral Nutrition (TPN) patients according to their nutritional status at the time of admission. Thirty-three patients in the Intensive Care Unit at S University Hospital were the subjects of this study. Their nutritional status was classified as At-risk I (Mild PCM, n = 13), At - risk II (Moderate PCM, n = 9) and At-risk III (Marasmus + kwashiorkor + severe PCM, n = 11) . Anthropometeric, biochemical and dietary assessments were performed. The Patients intake of calories (75.02%) and protein (53.15%) was insufficient compare with Korean RDA requirements. The body weight and the Body Mass Index (BMI) in the At-risk III group were significantly lower than in the other groups. The percentage of body weight loss and change of body weight (kg) were significantly higher than in the other groups. The subjects were malnourished as indicated by nutritional related parameters such as serum total protein, albumin, total lymphocyte count (TLC), hemoglobin and hematocrit. Serum total protein, albumin and TLC levels were lower at the time of admission before TPN administration. But after TPN administration, they increased. The electrolyte concentrations did not show any differences following TPN administration. The nutritional status of the patients could be affect by the duration of TPN administration and the number of days of the patients hospitalization. The patients who require nutritional support need the continuous follow-up care and monitoring by a nutritional support team. (Korean J Community Nutrition 8(4) : 574-583, 2003)

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.2
• /
• pp.33-38
• /
• 2003

In order to design the high strength corrugated fiberboard containers for agricultural products that can be used for the cold chain system, a large number of individual boxes were placed in various humidity environments at two different temperature of 5 and $20^{\circ}C$. The results indicated that temperature changes do not effect on physical strength of corrugated fiberboard containers as much as humidity changes did. The main conclusion from this study was that compression strength of corrugated fiberboard containers dropped significantly at high humidity condition, but the rates varied depending on the number of walls, temperature, and perimeter of containers. The packaging designer must consider the corrugated fiberboard boxes are also greatly affected by dimensional variations such as the length versus width ratio. Based on this study, water-resistant board would not be necessary if the ambient relative humidity does not reach to a critical point, 85 percent in the cold chain system. However, the designer must count for the unexpected fluctuation of rotative humidity resulting in severe loss of the compression strength of corrugated fiberboard container.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.5
• /
• pp.1606-1623
• /
• 2015

Optical switching will be applied in datacenter networks because electronic switching is costly and power-consuming. In this paper, considering the ring-based interconnection using optical switching in the core of a datacenter, we study the home circuit (HC) construction for the labeled optical burst switching with home circuit (LOBS-HC), a new paradigm trying to share wavelengths among the HCs from the same source. In particular, aiming to construct HCs dynamically and properly, a scheme named optimal path matching and symmetric HC matching (OPM-SHM) is proposed. The main idea of OPM-SHM is to dynamically construct HCs by sharing wavelength(s) not only among the same-source HCs but also with symmetric HCs which have different sources other than the original LOBS-HC features. The simulation results demonstrate that OPM-SHM achieves better performance than some other methods in terms of burst loss rate and wavelength utilization of physical links. More specially, it maintains good load balancing for the datacenter network using an LOBS-HC ring. In addition, due to the symmetric feature of SHM, the proposed scheme can decrease the upper bound of the average hop count of the routing paths to half of the ring size.

• Journal of Veterinary Clinics
• /
• v.22 no.2
• /
• pp.170-173
• /
• 2005

A 4-year-old female Shunauzer dog was referred to the Veterinary Teaching Hospital of Chungbuk National University due to anorexia and depression. The dog had a history of regular walking on grass fields, weight loss, and hyperthermia $(40.6^{\circ}C)$. In the physical examination, lymph node enlargement was confirmed. Complete blood count result revealed leukocytosis and thrombocytopenia but there was no decreasing of red blood cells. On blood chemistry, serum ALP, GGT, CPK, and LDH were elevated. Abdominal radiograph showed splenomegaly. Anaplasma platys infection was suspected with inclusion body-like substances in platelets on blood smear. Anaplasma platys was confirmed by PCR. On the basis of laboratory examination, final diagnosis was anaplasmosis. Treatment was followed for 3 months with tetracycline and doxycycline. The patient was monitored every week during the treatment. The patient has recovered to normal condition without any clinical signs. We are going to emphasize the need of PCR technique in diagnosis and to report the possibility of long term treatment more than two months in rickettial disease.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.784-794
• /
• 2009

We present a full HD (1080p) H.264/AVC High Profile hardware encoder based on fast motion estimation (ME). Most processing cycles are occupied with ME and use external memory access to fetch samples, which degrades the performance of the encoder. A novel approach to fast ME which uses shared multibank memory can solve these problems. The proposed pixel subsampling ME algorithm is suitable for fast motion vector searches for high-quality resolution images. The proposed algorithm achieves an 87.5% reduction of computational complexity compared with the full search algorithm in the JM reference software, while sustaining the video quality without any conspicuous PSNR loss. The usage amount of shared multibank memory between the coarse ME and fine ME blocks is 93.6%, which saves external memory access cycles and speeds up ME. It is feasible to perform the algorithm at a 270 MHz clock speed for 30 frame/s real-time full HD encoding. Its total gate count is 872k, and internal SRAM size is 41.8 kB.

• Wind and Structures
• /
• v.15 no.4
• /
• pp.313-329
• /
• 2012

There have existed for a number of years good practice guidelines for the use of Computational Fluid Dynamics (CFD) in the field of wind engineering. As part of those guidelines, details are given for the size of flow domain that should be used around a building of height, H. For low-rise buildings, the domain sizes produced by following the guidelines are reasonable and produce results that are largely free from blockage effects. However, when high-rise or tall buildings are considered, the domain size based solely on the building height produces very large domains. A large domain, in most cases, leads to a large cell count, with many of the cells in the grid being used up in regions far from the building/wake region. This paper challenges this domain size guidance by looking at the effects of changing the domain size around a tall building. The RNG ${\kappa}-{\varepsilon}$ turbulence model is used in a series of steady-state solutions where the only parameter varied is the domain size, with the mesh resolution in the building/wake region left unchanged. Comparisons between the velocity fields in the near-field of the building and pressure coefficients on the building are used to inform the assessment. The findings of the work for this case suggest that a domain of approximately 10% the volume of that suggested by the existing guidelines could be used with a loss in accuracy of less than 10%.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.51-57
• /
• 2013

The current expanding mobile markets incessantly demands small form factor, low power consumption and high aggregate throughput for silicon-level integration such as memory to logic system. One of emerging solution for meeting this high market demand is 3D through silicon stacking (TSS) technology. Main challenges to bring 3D TSS technology to the volume production level are establishing a cost effective supply chain and building a reliable manufacturing processes. In addition, this technology inherently help increase number of IOs and shorten interconnect length. With those benefits, however, potential signal and power integrity risks are also elevated; increase in PDN inductance, channel loss on substrate, crosstalk and parasitic capacitance. This paper will report recent progress of wide IO memory to high count TSV logic device assembly development work. 28 nm node TSV test vehicles were fabricated by the foundry and assembled. Successful integration of memory wide IO chip with less than a millimeter package thickness form factor was achieved. For this successful integration, we discussed potential signal and power integrity challenges. This report demonstrated functional wide IO memory to 28 nm logic device assembly using 3D package architecture with such a thin form factor.