• Korean Journal of Materials Research
• /
• v.32 no.3
• /
• pp.146-152
• /
• 2022

One disadvantage of deep cycle flooded lead-acid batteries is increasing water loss caused by use of (+) Pb-Sb / (-) Pb-Sb alloy grid. Water loss is generated by the emission of hydrogen gas from the (-) electrode during battery charging. In this paper, we maintain cycle life aspect through the development of hybrid flooded lead-acid batteries to which a (+) Pb-Sb / (-) Pb-Ca grid is applied and deal with the improvement of water loss. The amount of water loss compared to that of the (-) Pb-Sb grid decreased when Ca was added to the (-) Pb grid. For the (-) Pb-Ca grid, it was confirmed that the time to reach 0.0 V, at which water decomposition occurs, was increased compared to that of the (-) Pb-Sb grid at the NPV (Negative Potential Voltage). In the cycle life test conducted with the BCI (Battery Council International) standard, compared to the (+) Pb-Ca grid, the (+) Pb-Sb grid increased the life cycle of the batteries and the (+) Pb-Ca grid showed an early end of life due to PbO corrosion layer generation, as determined through SEM / EDS and Tear Down analysis. In conclusion, by addition of Sb to (+) Pb grid and Ca to (-) Pb grid, we developed a hybrid flooded lead-acid battery that meets user requirements to improve water loss characteristics and preserve cycle life characteristics.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.10
• /
• pp.1503-1507
• /
• 2004

New synthetic methodology of the saturated and unsaturated Er(III)-chelated prototype complexes based on benzoate and pentafluorobenzoate ligands was developed through ligand-exchange reaction. The saturated 8-coordinated Er(III) complexes exhibit stronger near-IR emission than those of the unsaturated 6-coordinated Er(III) complexes, obtained from the direct photoexcitation of Er ions with 488 nm. Three $H_2O$ molecules coordinated in the unsaturated 6-coordinated complexes seriously quenched the near IR emission by the harmonic vibration relaxation decay of O-H bonds. Also, the stronger emission of the Er(III) complexes was obtained by the indirect photoexcitation of ligands than by the direct photoexcitation of the Er(III) ions, due to the energy transfer between the excited ligand and the erbium ion. Furthermore, the saturated Er(III)-chelated complex with C-F bonds shows much stronger near IR emission than that of the saturated Er(III)-chelated complex with C-H bonds. It is attributed to the influence of C-F bonds on near IR emission.

• International Journal of High-Rise Buildings
• /
• v.3 no.1
• /
• pp.35-48
• /
• 2014

In designing a 300 meter high skyscraper expected to be the tallest building in Japan, an earthquake-ridden country, we launched on the full-scale performance based design to ensure redundancy and establish new specifications using below new techniques. The following new techniques are applied because the existing techniques/materials are not enough to meet the established design criteria for the large-scale, irregularly-shaped building, and earth-conscious material saving and construction streamlining for reconstructing a station building are also required: ${\bullet}$ High strength materials: Concrete filled steel tube ("CFT") columns made of high-strength concrete and steels; ${\bullet}$ New joint system: Combination of outer diaphragm and aluminium spray jointing; ${\bullet}$ Various dampers including corrugated steel-plate walls, rotational friction dampers, oil dampers, and inverted-pendulum adaptive tuned mass damper (ATMD): Installed as appropriate; and ${\bullet}$ Foundation system: Piled raft foundation, soil cement earth-retaining wall construction, and beer bottle shaped high-strength CFT piles.

• International Journal of High-Rise Buildings
• /
• v.4 no.3
• /
• pp.219-226
• /
• 2015

By the end of 2014, the number of completed and under-construction supertall buildings above 250 meters in China reached 90 and 129, respectively. China has become one of the centers of supertall buildings in the world. Supertall buildings in China are getting taller, more slender, and more complex. The structural design of these buildings focuses on the efficiency of lateral resisting systems and the application of energy dissipation. Furthermore, the research, design, and construction of high-performance materials, pile foundations, and mega-members have made a lot of progress. Meanwhile, more and more challenges are presented, such as the improvement of structural system efficiency, the further understanding of failure models, the definition of design criteria, the application of high-performance materials, and construction monitoring. Thus, local structural engineers are playing a more important role in the design of supertall buildings.

• Composites Research
• /
• v.31 no.6
• /
• pp.311-316
• /
• 2018

In the present study, the effect of GO in damping capacity of CF/epoxy laminates was studied via free vibration analysis. The composite laminates were manufactured by using vacuum assisted resin transfer molding technique. The damping properties of the prepared hybrid composites were determined in terms of natural frequency and damping ratio in free vibration test. The foremost aspire of this investigation was to compare the vibration properties i.e. natural frequency and modal damping of the prepared composites with the numerical results. The numerical study was carried out via FEA using $ANSYS^{TM}$ workbench software. The parametric study of the numerical models was also studied considering the beam free length and the beam thickness. It was found that the incorporation of GO enhanced the damping capacity of the composite and the variation of natural frequencies in mode1varied by 2-5% compared to the experimental study.

• International Journal of High-Rise Buildings
• /
• v.12 no.2
• /
• pp.121-128
• /
• 2023

Cities cover only 3% of the planet's surface, yet they are responsible for more than 75% of the global emissions. Given the projected urban built area will double by 2060, the carbon emitted from cities will further increase. SOM proposes the Urban Sequoia concept, for buildings that go beyond 'net zero' and absorb carbon from the atmosphere. This concept combines multiple strategies, including the use of an optimised building form with a highly efficient structural system, modularized prefabrication techniques, holistic integration of facade, MEP and interiors' components, bio-based materials, and Direct Air Capture (DAC) technology, to reduce a 40-storey building's whole life cycle carbon emissions by more than 300% over a 100-year lifespan. Calculations of embodied carbon emissions are performed with SOM's in-house Environmental Analysis (EA) Tool to demonstrate the effectiveness of employing Urban Sequoia's design strategies in the design of new buildings using current technologies.

• Korean Journal of Materials Research
• /
• v.15 no.8
• /
• pp.536-542
• /
• 2005

Recently European Council(EU) published the RoHS(restriction of the use of certain hazardous substances in electrical and electronic equipment) which is prohibit the use of Pb, Hg, Cd, $Cr^{+6}$, PBB or PBDE in the electrical and electronic equipments. So EU member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain 6 hazardous substances. The one of the most important in electronics manufacturing process is soldering. Soldering process use the chemical substances which are applied in fluxing and cleaning processes and it can generate the malfunction of electronics caused by corrosion in the fields conditions. Therefore this study researched on the polarization and Tafel properties of Sn40Pb and Sn3.0Ag0.5Cu(SAC) solder based on the electrochemical theory. We prepared SnPb specimens which was aged in $150^{\circ}C,\;180^{\circ}C$ for 15 minutes ana Sn3.0Ag0.5Cu specimens that was aged in $180^{\circ}C,\;220^{\circ}C$ for 10 minutes. Experimental polarization curves were measured in distilled ionized water and $3.5 wt\%$, 1 mole NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrode, respectively. To observe the electrochemical reaction, polarization test was conducted from -250 mV to +250 mV. From the polarization curves that were composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density(Icorr). In these results, corrosion rate for two specimen were compared Sn3.0Ag0.5Cu with SnPb solders

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2473-2476
• /
• 2014

Background: Little is known about the cancer screening prevalence and correlates in older adults from different racial backgrounds. In the context of heightened efforts for prevention and early diagnosis, we collected information on screening for two major types of cancers: cervical and breast cancer in order to establish their prevalence estimates and correlates among older South African women who participated in the Study of Global Ageing and Adults Health (SAGE) in 2008. Materials and Methods: We conducted a national population-based cross-sectional study with a multi-stage stratified cluster sample of 3,840 individuals aged 50 years or older in South Africa in 2008. In this analysis, we only considered the female subsample of (n=2202). The measures used included socio-demographic characteristics, health variables, anthropometric and blood pressure measurements. Multivariable regression analysis was performed to assess the association of socio-demographic factors, health variables and cancer screening. Results: Overall, regarding cervical cancer screening, 24.3% ever had a Papanicolaou (PAP) smear test, and regarding breast cancer screening, 15.5% ever had a mammography. In multivariate logistic regression analysis, younger age, higher education, being from the White or Coloured population group, urban residence, greater wealth, and suffering from two or more chronic conditions were associated with cervical cancer screening, and higher education, being from the White or Indian/Asian population group, greater wealth, having a health insurance, and suffering from two or more chronic condtions were associated with breast cancer screening. Conclusions: Cancer screening coverage remains low among elderly women in South Africa in spite of the national guideline recommendations for regular screening in order to reduce the risk of dying from these cancers if not detected early. There is a need to improve accessibility and affordability of early cervical and breast cancer screening for all women to ensure effective prevention and management of cervical and breast cancer.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.15
• /
• pp.6561-6568
• /
• 2015

Background: Smokeless tobacco (SLT) has long been realized as an important component of the fight for global tobacco control. It still remains a major problem in countries like India, Bangladesh and Nepal. The objective of this study was to estimate the trends of SLT use in three countries of the SEARO WHO office. Materials and Methods: We used data from national surveys in three countries (Bangladesh, India and Nepal) to estimate trends in prevalence of current SLT use. All available nationally representative data sources were used. Estimates were weighted, age standardized and given along with 95% confidence intervals. Significance of linear trend in prevalence over time was tested using the Cochrane-Armitage test for trend. A p value of less than 0.05 was considered statistically significant. Results: We identified three surveys for Bangladesh, three for India and four for Nepal that met the selection criteria (such as Demographic and Health Surveys, WHO-STEPwise approach to Surveillance and Global Adult Tobacco Surveys). A significantly increasing trend was noticed in the prevalence of current SLT use among Bangladeshi men (20.2% to 23%, p=0.03). In India, a similar significantly increasing trend was seen among men (27.1% to 33.4%, p<0.001) and women (10.1% to 15.7%, p<0.001). In Nepal, there was a no significant trend among both men (39.1% to 31.6%, p=0.11) and women (5.6% to 4.7%, p=0.49). Conclusions: In the study countries SLT use has remained at alarmingly high levels. Usage trends do not show any signs of decline in spite of control efforts. Tobacco control measures should focus more on controlling SLT use.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.9
• /
• pp.1455-1462
• /
• 2020

Objective: The purpose of this study was to investigate whether goose growth and feather characteristics are influenced by their line and feeding surroundings, inclusive of floor materials and types, since there are no reports regarding these factors. Methods: The 240 White Roman geese which were hatched and sex identified came from 3 commercial goose farms. They were randomly distributed to 24 pens depending on a completely random design. The study continued for 13 weeks and included 3 lines of commercial geese and 2 floor types (cement strip floor [CSF] or cement floor [CF]). Results: The day one gosling weight from A farm was lower than other two farms (96 g vs 107 and 115 g; p<0.001). Afterwards, the body weight, back length, keel length, chest girth and main wing feather length among 3 farms showed no significance difference prior to 12 weeks. The CF group showed heavier body weight, shorter back length, longer keel length, shorter chest girth and shorter main wing feather length than the CSF group prior to 12 weeks. The down weight in the CF was heavier than the CSF group (57.1 g vs 41.8 g; p<0.01) prior to 13 weeks. Conclusion: The body weight showed the positive relations for dry feather weight (r = 0.59), down weight (r = 0.69), percent of the down weight of live body weight prior to 13 weeks (r = 0.61).