• Journal of the Korean Society of Costume
• /
• v.50
• /
• pp.161-182
• /
• 2000

The results of this study were as follows: The quit has been used for warmth supporting materials protection religious uses decoration and giving stability of shapes. Quilt is developed from monk's robe of lags and the word 'nubi' is originated form 'nabeui' in both Korean and Japan. Korean quilt was used mainly for warmth: Japanese one was used for warmth and supporting materials. The techniques used for traditional Korean quit were parallel vertical hand stitches. On the other hand Japanese traditional quilt uses various motifs of sashiko which is similar to embroidery and named by region. Korean quilt can be divided into three types by the stitch intervals: Fin quit(Jan unbi) Medium quilt(Jung nubi) and Wide quilt(Demun nubi). Japanese quilt has been developed in east-north region and can be grouped into sashiko kogin and hishizashi by motifs of quit. Korean quilt costumes are stuffed with cotton between the outer fabrics and linings and stitched vertically on the fabrics Main fabrics used were silk and cotton. Japanese quilt costume uses cotton yarns for stitching on flax or cotton fabrics used were silk and cotton. fabrics and main uses of the quilot costumes were sorking clothes of working classes. Both Korean and Japanese quilt costumes contain of family's health happiness and longevity. In summary Korean quilts use two layers of fabrics and stuff them with cotton and stitch parallel vertical i\lines to provide warmth Japanese quilt are sashiko which is stitches of strand in various shapes using cotton yarns. differ by region and are made for warmth and supporting materials.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.42-44
• /
• 1998

The effect of medium composition on PLB formation and multiplication and shoot regeneration was studied to establish the micropropagation system of the tropical orchid Phalaenopsis. The highest frequence of PLB formation resulted from the VW medium with 1.2 times ion concentration, 1% sucrose, 1.5g/L PVP or 2.5g/L active charcoal, apple and potato extract and 4g/L gellan gum. The highest ratio of PLB multiplication was obtained from the VW medium with 2% sucrose, apple and potato extract and cotton plate. The shoot regeneration was the most effective with the hyponex medium with 3% apple, 3% potato and 4% banana extract.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.9
• /
• pp.1338-1346
• /
• 2006

Ansamitocin P-3 is a potent antitumor agent produced by A. pretiosum. A deletion mutant of A. pretiosum was constructed by deleting the asm2 gene, a putative transcriptional repressor. The deletion mutant showed a 9-fold enhanced ansamitocin P-3 productivity. The response surface method with central composite design was employed to further optimize the culture medium composition for ansamitocin P-3 production by the deletion mutant. The concentrations of four medium ingredients, dextrin, maltose, cotton seed flour, and yeast extract, which have been reported as major components for ansamitocin production, were optimized through a series of flask culture experiments. The optimum concentrations of the selected factors were found to be dextrin 6.0%; maltose 3.0%; cotton seed flour 0.53%; and yeast extract 0.45%. The maximum titer of ansamitocin P-3 was 78.3 mg/l with the optimized composition, about 15-folds higher than the unoptimized titer of 5.0 mg/l obtained with YMG medium.

• Journal of Plant Biotechnology
• /
• v.7 no.4
• /
• pp.211-218
• /
• 2005

Genetic transformation was carried out by using biolistic gun method. The hypocotyl derived embryogenic calli (explants) of cotton (Gossypium hirsutum L.) cv. Cocker-312 were transformed with a recombinant pGreen II plasmid, in which both, bar (selection marker) and GUS (${\beta}$-glucuronidase) reporter genes were incorporated. Explants were arranged on osmoticum-containing medium (0.5M mannitol) 4 hours prior to and 16 hours after bombardment that was resulted into an increase about >80% for GUS stable expression. 3 days after bombardment, GUS assay was performed, which exhibited, $18.36{\pm}1.00$ calli showed blue spots. The transformed embryogenic calli were cultured on selection medium (@ 6 mg/L basta) for 3 months. The putative transgenic plants were developed via selective somatic embryogenesis (@1.50 mg/L basta); maximum $27.58{\pm}1.25$ somatic embryos were obtained while $17.47{\pm}1.00$ embryos developed into plantlets (@ 0.75mg/L basta). In five independent experiments, up to 7.24% transformation efficiency was recorded. The presence of the transgenes was analyzed by using PCR and southern hybridization analysis. The transgenic plants were developed with in 6-7 months, but mostly transformants were abnormal in morphology.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.604-612
• /
• 2011

Beauveria bassiana SFB-205 supernatant can effectively control cotton aphid populations, which is closely associated with its chitinase activity. The present work extends to optimizing a culture medium to produce more efficacious supernatant in flask conditions, followed by scale-up in 7 L, 300 L and 1.2 KL fermentors with the parameter of chitinase. In flask conditions, a combination of soluble starch and yeast extract produced the greatest amount of chitinase (5.1 units/ml) and its supernatant had the highest aphicidal activity. An optimal quantitative combination of the two substrates, estimated by a response surface method, enabled the supernatant to have 15.7 units/ml of chitinase activity and 3.7 ml/l of median lethal concentration ($LC_{50}$) of toxicity against cotton aphid adults in laboratory conditions. In the scale-up conditions, overall supernatant had 25-28 units/ml of chitinase activity. Decrease in pH and limitation of dissolved oxygen (DO) during cultures were significantly related to the yield of chitinase. These results suggest that the substrate-dependent chitinase production can be background information for optimizing a culture medium, and pH and DO are critical factors in maximizing the production in scale-up conditions.

• Mycobiology
• /
• v.40 no.3
• /
• pp.164-167
• /
• 2012

The effects of aeration through lid filters on the hyphal growth of Lentinula edodes (oak mushroom) in sawdust cultivation bags were investigated. The aeration treatment levels were traditional 27 mm hole cotton plugs, cotton balls and combinations of seven hole sizes ${\times}$ two hole positions (up and under) in the lids covering plastic bags containing 1.4 kg sawdust medium at 63% moisture that had been autoclaved for one hour and inoculated with sawdust spawn of L. edodes strain 921. Aeration treatment effects were measured based on the $CO_2$ concentration at the 15th wk, as well as the hyphal growth rate and degree of weight loss of bags every 14 days for 15 wk. In bags with traditional cotton plugs, the $CO_2$ concentration was $3.8{\pm}1.3%$, daily mean hyphal growth was $2.3{\pm}0.6mm$ and daily mean weight loss was $0.84{\pm}0.26g$. In the bags with 15 mm diameter holes, the $CO_2$ concentration was $6.0{\pm}1.6%$, daily hyphal growth was $2.8{\pm}0.2mm$ and daily weight loss was $0.86{\pm}0.4g$. The bags with 15 mm holes had a higher $CO_2$ concentration and lower water loss than bags with other hole sizes, but the hyphal growth was not significantly different from that of other bags. The weight loss of bags increased proportionally relative to the lid hole sizes. Taken together, these results indicate that traditional cotton plugs are economically efficient, but 15 mm hole lids are the most efficient at maintaining hyphal growth and controlling water loss while allowing $CO_2$ emissions.

• Journal of Acupuncture Research
• /
• v.38 no.3
• /
• pp.200-204
• /
• 2021

Background: Standardized procedures for the clinical application of fire cupping methods have not been established. In particular, the pressure parameters have not been fully characterized and described. Therefore, using various materials, this study investigated the pressure range exerted during fire cupping therapy. Methods: In this study, 3 differently sized (small, medium, large) glass and bamboo cups were used in the cotton ball fire cupping procedure to measure the pressure inside the cup applied to a human skin model. The pressure in each cup was measured 15 times for a total of 90 measurements. Results: A small bamboo cup had the minimum overall pressure (-305.4 mmHg), whereas the large glass cup exerted the maximum pressure (-401.3 mmHg), followed by the medium glass cup, large bamboo cup, small glass cup, and medium bamboo cup. The average pressure exerted by the cotton ball method for all cups ranged from -348.715 mmHg to -358.694 mmHg (95% confidence interval). Overall, the glass cups had a greater pressure than the bamboo cups in all groups (p < 0.001). Among the glass cups used, the larger the size of the cup, the higher the average pressure detected (-381.947 mmHg to -391.973 mmHg; p < 0.05). Conclusion: Large glass cups which are widely used in clinical practice, when used in the fire cupping method exerted pressure ranging from -381.947 mmHg to -391.973 mmHg (95% CI).

• Textile Coloration and Finishing
• /
• v.7 no.2
• /
• pp.47-54
• /
• 1995

Safflower is natural red dye largely used for dyeing on cotton. It contains yellowish safflower yellow and reddish carthamin, whose constitution is known. Safflower yellow is water-soluble dye and carthamin is solved in alkaline condition. Carthamon obtained by adding acidic solution to a carthamin shows the original hue of safflower. In present study, the dyeing behavior of natural dye known as safflower are examined in an aqueous acidic medium by use of the different dyeing methods such as traditional, modern and purifide-powder method. The relationship between the dye-uptake of cotton fabric investigated by the three methods and the various dyeing conditions is discussed.

• Textile Coloration and Finishing
• /
• v.16 no.2
• /
• pp.8-14
• /
• 2004

The purpose of this study was to investigate dyeing properties and antibacterial activities of cotton and silk fabrics treated with Ginkgo biloba leaf extracted with three kinds of aqueous solvents: distilled water, electrolytic reduction water and electrolytic oxidation water. The optimum dyeing condition of Ginkgo biloba leaf was 120 min at 8$0^{\circ}C$. Electrolytic reduction water had the highest dyeability to both cotton and silk compared with electrolytic oxidation water and distilled water. A color of extract by distilled water and electrolytic oxidation water showed yellowish Yellow Red, extract by electrolytic reduction water showed reddish Yellow Red. Irrespective of kinds of extraction solvents, appropriate acidity of medium was pH 9∼11 and pH 3 for cotton and silk fabrics, respectively. Colorfastness to laundering and Light fastness showed generally low but crocking fastness was excellent. Antibacterial activities of the treated fabrics above were 99.9%.

• Plant Resources
• /
• v.3 no.2
• /
• pp.105-109
• /
• 2000

This study was carried out to find a useful mushroom at Chungnam Agricultural Research And Extention Service. Twenty materials used were collected from domestic and exotic area. These races were compared bontanical characteristics to leading varieties by PCR-RAPD methods. Mycelial growth temperature of Chongpung and Myongwol were at 20 to 25 $^{\circ}C$ and 25 to 30 $^{\circ}C$ at PDA medium, respectively mycelial growth of these varieties were similiar at pH 6.5 to 7.5. In case of mushroom cultivation temperature ranges, Chongpung was at 5 to 26$^{\circ}C$ and Myongwol was at 7 to 28$^{\circ}C$, but the optimum temperature range of these were appeared at 15 to 19$^{\circ}C$. Culture temperature of these was 23$^{\circ}C$ and period of mycelial culture was needed 23 to 24 days under 850cc/pp, while was needed 11 to 12 days at waste cotton medium. Cap color of these at first inducing mushroom was all dark blue, but at late growing stages Chongpung was shown as grey, and Myongwol was shown as dark grey. Yield of Chongpung was appeared as 46kg/3.3$m^2$ and that of Myongwol was 41kg /3.3$m^2$, while Chunchu No2 as check was 40kg/3.3$m^2$. Results from PDA medium and PCR-RAPD analysis two of these were different from others.