• 대한원격탐사학회지
• /
• 제21권5호
• /
• pp.433-443
• /
• 2005

This paper show that, without installation of expensive VR (Virtual Reality) program, the sharing information is possible through posting three-dimensional road structures on the web, and avoiding the conventional top-down decision making method, fast bottom-up communication is possible base on the Virtual GIS (Geographic Information System). In this paper, using Viewpoint Scene Builder, internet-based software, the transformation was conducted to give pertinent type for web posting. In order to use the completed route at the scene builder, the output with ASCII Export is required, and ASE (ASCII Scene Export) contains the property information including the coordinate and frame of mesh vertex. Through in advance recognition of the problems regarding route design and petition due to environmental rights infringement, the time and cost due to design alteration can be reduced. It's difficult to provide VR based on the internet because file that embodied with internet GIS was complicated and its capacity comes to scores of mega-bites. But, this study provides VR with internet according to a basis by simplification of files.

• Nuclear Engineering and Technology
• /
• 제45권4호
• /
• pp.477-488
• /
• 2013

The PLC (Programmable Logic Controller) has been widely used to implement real-time controllers in nuclear RPSs (Reactor Protection Systems). Increasing complexity and maintenance cost, however, are now demanding more powerful and cost-effective implementation such as FPGA (Field-Programmable Gate Array). Abandoning all experience and knowledge accumulated over the decades and starting an all-new development approach is too risky for such safety-critical systems. This paper proposes an RPS software development process with a platform change from PLC to FPGA, while retaining all outputs from the established development. This paper transforms FBD designs of the PLC-based software development into a behaviorally-equivalent Verilog program, which is a starting point of a typical FPGA-based hardware development. We expect that the proposed software development process can bridge the gap between two software developing approaches with different platforms, such as PLC and FPGA. This paper also demonstrates its effectiveness using an example of a prototype version of a real-world RPS in Korea.

• 한국산업융합학회 논문집
• /
• 제25권6_3호
• /
• pp.1285-1291
• /
• 2022

In this paper, we propose a low-cost, low-power embedded environment-based deep learning lightweight model for input images to recognize laundry management codes. Laundry franchise companies mainly use barcode recognition-based systems to record laundry consignee information and laundry information for laundry collection management. Conventional laundry collection management systems using barcodes require barcode printing costs, and due to barcode damage and contamination, it is necessary to improve the cost of reprinting the barcode book in its entirety of 1 billion won annually. It is also difficult to do. Recognition performance is improved by applying the VGG model with 7 layers, which is a reduced-transformation of the VGGNet model for number recognition. As a result of the numerical recognition experiment of service parts drawings, the proposed method obtained a significantly improved result over the conventional method with an F1-Score of 0.95.

• 대한전자공학회논문지SP
• /
• 제47권6호
• /
• pp.19-27
• /
• 2010

본 논문은 B-스플라인 능동적 윤곽을 차 에지 영상에 적용하여 얼굴을 검출함에 있어, 검출 결과의 정확도를 제고하고 연산량을 감소시키는 방법을 제안한다. 제안 방법은 먼저, 차이 영상의 첨도(kurtosis)를 이용하여 사용자의 움직임량을 추정한다. 이때, 첨도 값에 따라 사용자의 움직임량이 작다고 판단된 경우에는 윤곽선 적합을 실시하지 않으며, 움직임량이 크다고 판단된 경우에만 윤곽선 적합을 실시한다. 그 후, 윤곽선 적합을 위하여 이진화된 차이 영상의 거리변환(distance transform)된 결과와 현재 영상의 에지(edge)를 사용하여 움직임과 관련된 차 에지 영상을 추출하고, 마지막으로 이렇게 추출된 차 에지 영상에 윤곽선 적합을 실시하여 얼굴의 위치를 검출하게 된다. 첨도를 이용하여 사용자의 움직임량을 추정하는 방법은 윤곽선 적합 결과를 안정화시켜주는 동시에 연산량을 절약시켜주며, 현재 영상의 에지와 이진화된 차이 영상의 거리변환을 사용한 움직임 에지 추정 방법은 윤곽선 처짐과 불연속적인 에지 추출의 문제점을 개선시켜준다. 실험을 통해, 제안한 방법이 기존의 윤곽선 처짐이나 에지 끊어짐에 의한 오류를 줄여 주는 동시에, 약 39%의 영상에 대한 윤곽선 적합을 생략시켜주어 연산량을 줄여 줄 수 있음을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1655-1666
• /
• 2015

This paper proposes a new approach of Field Programmable Gate Array (FPGA) controlled digital implementation of shunt active power filter (SAPF) under steady state and dynamic operations. Typical implementations of SAPF uses microprocessor and digital signal processor (DSP) but it limited for complex algorithm structure, absence of feedback loop delays and their cost can be exceed the benefit they bring. In this paper, the hardware resources of an FPGA are configured and implemented in order to overcome conventional microcontroller or digital signal processor implementations. This proposed FPGA digital implementation scheme has very less execution time and boosts the overall performance of the system. The FPGA controller integrates the entire control algorithm of an SAPF, including synchronous reference frame transformation, phase locked loop, low pass filter and inverter current controller etc. All these required algorithms are implemented with a single all-on chip FPGA module which provides freedom to reconfigure for any other applications. The entire algorithm is coded, processed and simulated using Xilinx 12.1 ISE suite to estimate the advantages of the proposed system. The coded algorithm is also defused on a single all-on-chip Xilinx Spartan 3A DSP-XC3SD1800 laboratory prototype and experimental results thus obtained match with simulated counterparts under the dynamic state and steady state operating conditions.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.257-262
• /
• 2001

As computer-related technologies have been developed, legacy design systems have not been appropriate for new computing environment. Therefore, it is necessary that most of them are either modified or newly developed. However, this requires quite much amount of cost and time. This paper presents a method of extending legacy design system without modification using XML and XSLT. In order to apply the developed method, a good example of legacy design systems, AGMA gear rating system has been extended so as to be suitable for the distributed computing environment. An XML document for AGMA gear rating process is defined. It is transformed to the form of the input document of AGMA gear rating system by XSLT processor according to the transformation rules defined in the AGMA gear rating XSLT document. After that, AGMA gear rating system reads this input document and generates an output document in the server. These operations are automatically executed by the external legacy system controller without user interactions. Using these operations, AGMA gear rating web service has been developed based on SOAP and WSDL to provide the functions of legacy AGMA gear rating system through the distributed network. Any system or user can implement AGMA gear rating process independently to the platform type, without making it for oneself, by simply referring the AGMA gear rating web service via Internet.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권4호
• /
• pp.2042-2059
• /
• 2019

Digital shadow puppet has traditionally relied on expensive motion capture equipments and complex design. In this paper, a low-cost driven technique is presented, that captures human pose estimation data with simple camera from real scenarios, and use them to drive virtual Chinese shadow play in a 2.5D scene. We propose a special method for extracting human pose data for driving virtual Chinese shadow play, which is called 2.5D human pose estimation. Firstly, we use the 3D human pose estimation method to obtain the initial data. In the process of the following transformation, we treat the depth feature as an implicit feature, and map body joints to the range of constraints. We call the obtain pose data as 2.5D pose data. However, the 2.5D pose data can not better control the shadow puppet directly, due to the difference in motion pattern and composition structure between real pose and shadow puppet. To this end, the 2.5D pose data transformation is carried out in the implicit pose mapping space based on self-network and the final 2.5D pose expression data is produced for animating shadow puppets. Experimental results have demonstrated the effectiveness of our new method.

• 한국IT서비스학회지
• /
• 제21권5호
• /
• pp.15-28
• /
• 2022

Recently, government agencies are actively adopting the platform model as a means of public policy. However, existing studies on the public platform are minimal and have focused on user experiences or the possibility of public usage of the platform model. Now the research concerning building governance structure and utilizing network effects of the platform after adopting the platform model in the public sector is keenly required. This study intended to ignite academic dialogue on the governance of public platforms in the context of digital transformation. This study focused on a case of the 'Special delivery,' a public delivery app established by Gyeonggi-do. In order to analyze the characteristics of the public platform and its governance structure, data were collected from press releases, policy reports, and news articles. Data was analyzed using the frame of Hagui's platform design factors and Ansell & Gash's collaborative governance model. The results of the public platform analyses showed 1) incompleteness in the value trade-off accounting, which was designed for platform business based on general cost-benefit analysis, and 2) a closed governance structure that limits direct participation of diverse user groups(i.e., service provider, customer) in order to enhance providers' utility by preventing customers' excessive online activities. The results of this study provided theoretical and policy implications regarding designing the strategy for accounting for value trade-offs and functioning governance structure for public platforms.

• International Journal of Computer Science & Network Security
• /
• 제22권11호
• /
• pp.373-380
• /
• 2022

The field of land surveying is changing dramatically due to the way data is processed, analyzed and presented. Also, there is a growing demand for digital spatial information, coming primarily from the GIS (Geographical Information System) user community. Such a demand has created a strong development potential for a new land surveying software. An overview of the development and capabilities of a land surveying software platform based on the Windows system, SurveyingMap, is presented. Among its many features, SurveyingMap provides a lot of adaptability for networks adjustment, geodetic and plane coordinates transformation, contouring, sectioning, DTM (Digital Terrain Model) generation, and large scale mapping applications. The system output is compatible with well known computer aided drafting (CAD) /GIS packages to expand its scope of applications. SurveyingMap is also suitable for non-technical users due to the user-friendly graphic user interface. The system could be used in engineering, architecture, GIS, and academic teaching and research, among other fields. Two applications of SurveyingMap, extension of field control and large scale mapping, for the case study area are established. The results demonstrate that the system is adaptable and reasonably priced for use by college and university students.

• 한국재료학회지
• /
• 제28권7호
• /
• pp.381-390
• /
• 2018

Shape memory alloys(SMAs) have revolutionized the material engineering sciences as they exhibit exclusive features i.e. shape memory effect(SME) and super-elasticity. SMAs are those alloys that when deform return to their predeformed shape upon heating, they also restore their original shape by removing the load. Research on properties of newly advent of several types of ferrous based shape memory alloys(Fe-SMAs), shows that they have immense potential to be the counterpart of Nitinol(NiTi-SMA). These Fe-SMAs have been used and found to be effective because of their low cost, high cold workability, good weldability & excellent characteristics comparing with Nitinol(high processing cost and low cold workability) SMAs. Some of the Fe-SMAs show super-elasticity. Fe-SMAs, especially Fe-Mn-Si alloys have an immense potential for civil engineering structures because of its unique properties e.g. two-way shape memory effect, super elasticity and shape memory effect as well as due to its low cost, high elastic stiffness and wide transformation hysteresis comparative to Nitinol. Further research is being conducted on SMAs to improve and impinge better attributes by improving the material compositions, quantifying the SMA phase transition temperature etc. In this research pre-existing Fe-SMAs are categorised and collected in a tabulated form. An analysis is performed that which category is mostly available. Last 50 years data of Fe-SMA publications and US Patents is collected to show its importance in terms of increasing research on such type of alloys to invent different compositions and applications. This data is analysed as per different year groups during last 50 years and it was analysed as per whether the keywords exist in title of an article or anywhere in the article. It was found that different keywords related to Fe-SMAs/categories of Fe-SMAs, almost don't exist in the title of articles. However, these keywords related to Fe-SMAs/categories of Fe-SMAs, exist inside the article but still there are not too many publications related to Fe-SMAs/categories of Fe-SMAs.