• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of Distribution Science
• /
• v.14 no.5
• /
• pp.51-57
• /
• 2016

Purpose - In the year of 2015 and 2016, one of the items that got attention in CES was a drone. It has been 100 years since a drone emerged, but most were used for military purposes. As its use became diverse as of 2010, it got attention of the general public. In Korea, it was in 2011 that a drone was known to the public through an aerial video shooting for television program. This study tried to come up with suggestions by comparing domestic with overseas cases, and tried to consider the related technologies and systems with applying the role of drones in logistics service. Research design, data, and methodology - The overseas cases were regarded as drone's logistical purpose. The Prime Air service by US Amazon is still not commercialized and under pre-testing due to Federal Aviation Regulations, although it started in 2013. In Germany, DHL succeeded in delivering service testing which is called Parcelcopter, but it is not commercialized yet. Other than these, there are more attempts to prepare logistics service in China with Taobao, in France with Geopost's test, and in Africa. In Korea, CJ Korea Express tested delivery with a self-developed drone Results - In order to study for utilizing drones for logistics as the prerequisites, some overseas and domestic cases, which are currently considered, were reviewed. Also, the technologies and institutional requirements to commercialize drones for logistical purpose were reviewed. The reasons for using drones in logistics is to ensure the price competitiveness by reducing cost. The empirical test also will be needed because drone pilot areas are designated by ministry of land, infrastructure and transport. Conclusions - In order to utilize drones in logistics and foster the industry, this study would like to suggest the followings. First of all, size of drones for logistics needs to be fixed and their operating system should be standardized. Centralized investment resources are needed through standardization to ensure the market occupancy. Secondly, it is necessary to get the converged businesses that do research, develop and commercialize drones with the investment of private sector. Example can be found in Korea aerospace Industries. We can respond to the rapid growth of the market with intensive investing by integrating the private sector investment. Thirdly, institutional arrangements are needed to be established quickly. In the case of high-technologies like drones, institutional support often does not follow the rapid development of the technology. The problems can be found in securing drones-only airspace, creating drone-specialized pilot's license, matters related to remote controller and complementary regulations for drones in Aviation Act. If these regulations are not prepared or complemented at the right timing, technologies cannot be commercialized even though the development is completed. Fourthly, there is a need to secure the transparency regarding possible privacy and personal information protection problem while operating drones. Finally, in order to foster this new industry, government should focus on supporting R&D more in the long term than short term outcomes.

• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.291-317
• /
• 2022

This study tried to analyze the factors affecting consumers' vehicle selection for the spread of eco-friendly vehicles. We used the energy census data for this purpose, and although the energy census collects useful information from a large number of samples, it has been limitedly used to create simple statistics in many cases. Based on 2,771 transport sector microdata from the 2017 Energy Census, we collected vehicle price, fuel efficiency, and number of vehicle models, which are alternative characteristic variables that change according to consumers' choice, and converted and analyzed data to enable conjoint analysis. The analysis results in two-folds. First, it was confirmed that the official fuel efficiency of a vehicle and the fuel cost, which is affected by changes in the relative price of each fuel, are important variables in selecting an eco-friendly vehicle. In order to achieve the goal of spread of eco-friendly vehicles, it is necessary to develop technologies to improve fuel efficiency and set appropriate electric rates for charging electric vehicles. Second, an increase in the number of vehicle models through the expansion of the eco-friendly car industry and market also affects consumers' choice of eco-friendly vehicles, so efforts to expand the supply of eco-friendly vehicles will be an important factor. In addition, it is also significant that this study showed that the use of the energy census can be diversified by deriving meaningful policy implications using the results of the energy census periodically conducted in the country without a separate survey.

• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2017

The compact city usually provides good accessibility of residents with multiple transportation modes. However, in a compact city, annual average of travel distance per household by car is relatively short due to more congested traffic condition and larger travel cost than disperse city. As a result, total travel demand is decreasing when the region becomes more compact. Therefore compact development is regarded as one of the sustainable choices for future urban planning in many countries. This study aims at an empirical analysis of the relationship between urban compactness and travel demand based upon land-use and travel data for city of Seoul. In this study, 424 sub-districts with the mixed land-use patterns are assessed in a hexagonal diagram. The measurement is based on the relative deviation of each sector's characteristics including numbers of residence, manufacture, and trade & service. Multiple linear regression models are developed to analyze the effects of urban compactness on zonal trip generations. As a result, the trip generation rate in the residence-intensive and mixed-use areas is found to be relatively low. Furthermore, residents in high-compact areas tend to use public transport more often than residents in less compact areas.

• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.136-146
• /
• 1999

A series of experiments were carried out in winter to investigate the indoor thermal environment in greenhouses with different kinds of heating systems, and characterize the energy consumption, heat transport and thermal energy efficiency of each system. By the Quantitative calculation of heat losses which transmit through the covers of greenhouse, the fundamental data of energy-saving of the particular heating system were obtained. And from the analysis of air temperature differences between indoor and outside, it was possible to select more effective energy-saving and comfortable heating system in greenhouses. The electric heater was more stable in thermal environment and cheaper in cost, since it could be used during the surplus time of electric power from 10：00 p.M. to 8：00 A.M. But the low air temperature in greenhouses besides these times resulted in a chilling problem of the crops. The heating system by hot air had the advantage to show nearly uniform temperature difference by the height above the ground. But the system had the disadvantage to require more energy consumption than the electric heating system.

• Journal of Korean Society of Transportation
• /
• v.23 no.4 s.82
• /
• pp.81-91
• /
• 2005

The Traveling Salesman Problem(TSP) is one of the NP-complete (None-deterministic Polynomial time complete) route optimization problems. Its calculation time increases very rapidly as the number of nodes does. Therefore, the near optimum solution has been searched by heuristic algorithms rather than the real optimum has. This paper reviews the Ant System Algorithm(ANS), an heuristic algorithm of TSP and its applicability in the parcel delivery service in Korea. ASA, which is an heuristic algorithm of NP-complete has been studied by M. Dorigo in the early 1990. ASA finds the optimum route by the probabilistic method based on the cumulated pheromone on the links by ants. ASA has been known as one of the efficient heuristic algorithms in terms of its calculation time and result. Its applications have been expanded to vehicle routing problems, network management and highway alignment planning. The precise criteria for vehicle routing has not been set up in the parcel delivery service of Korea. Vehicle routing has been determined by the vehicle deriver himself or herself. In this paper the applicability of ASA to the parcel delivery service has been reviewed. When the driver s vehicle routing is assumed to follow the Nearest Neighbor Algorithm (NNA) with 20 nodes (pick-up and drop-off places) in $10Km{\times}10Km$ service area, his or her decision was compared with ASA's one. Also, ASA showed better results than NNA as the number of nodes increases from 10 to 200. If ASA is applied, the transport cost savings could be expected in the parcel delivery service in Korea.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.346-355
• /
• 2012

Recent in the world environmental issues and energy depletion problems have been received attention. One way to solve these problems is to use hybrid electric vehicles (HEVs). Therefore, the interest in HEV technology is higher than ever before. Viable candidates for the energy-storage systems in HEV applications may be absorbent glass mat (AGM) lead-acid, nickel-metal-hydride (Ni-MH) and rechargeable lithium batteries. The AGM battery has advantages in terms of relatively low cost, high charge efficiency, low self-discharge, low maintenance requirements and safety as compared to the other batteries. In order to implement HEV system in required more electric power commercial vehicles AGM batteries was connected to 2 series-2 parallels (2S2P). In this study, a one-dimensional modeling is carried-out to predict the behaviors of 2S2P AGM batteries system during charge and discharge. The model accounts for electrochemical reaction rates, charge conservation and mass transport. In order to validate the model, modeling results are compared with the experimentally measured data in various conditions.

• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.151-163
• /
• 2011

The LCM test is one of the most powerful and reliable methods for designing the disc cutter and for predicting the TBM (Tunnel Boring Machine) performance. It has an advantage to predict the actual load on disc cutter from the laboratory test on the real-size large rock samples, however, it also has a disadvantage to transport and/or prepare the large rock samples and to need an extra cost for experiment. Moreover it is not easy to execute the test for jointed rock mass, and sometimes the design model estimated from the test can not be applied to the real design of disc cutter. In order to break this critical point, lots of numerical studies have been performed. PFC2D can simulate crack propagation and rock fragmentation effectively, because it is useful in particle flow analysis. Consequently, in this study, the PFC2D has been adopted for numerical analysis on cutting power of disc cutter according to the different angle of joint, the different direction of joint, and the different space of joint with jointed rock mass models. From the numerical analyses, it was concluded that the bigger cutting power of disc cutter was needed for reverse cutting direction to joint rather than for forward direction, and the cutting power of disc cutter was increased with decreasing the dip angle of joint and decreasing the space of joints in reverse cutting direction. The more precise numerical model for disc cutter can be developed from comparison between the numerical results and LCM test results, and the resonable guideline is expected for prediction of TBM performance and disc cutter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.463-463
• /
• 2014

Dye-sensitized solar cells (DSSCs) have generated a strong interest in the development of solid-state devices owing to their low cost and simple preparation procedures. Effort has been devoted to the study of electrolytes that allow light-to-electrical power conversion for DSSC applications. Several attempts have been made to substitute the liquid electrolyte in the original solar cells by using (2,2',7,7'-tetrakis (N,N-di-p-methoxyphenylamine)-9-9'-spirobi-fluorene (spiro-OMeTAD) that act as hole conductor [1]. Although efficiencies above 3% have been reached by several groups, here the major challenging is limited photoelectrode thickness ($2{\mu}m$), which is very low due to electron diffusion length (Ln) for spiro-OMeTAD ($4.4{\mu}m$) [2]. In principle, the $TiO_2$ layer can be thicker than had been thought previously. This has important implications for the design of high-efficiency solid-state DSSCs. In the present study, we have fabricated 3-D Transparent Conducting Oxide (TCO) by growing tin-doped indium oxide (ITO) nanowire (NWs) arrays via a vapor transport method [3] and mesoporous $TiO_2$ nanoparticle (NP)-based photoelectrodes were prepared using doctor blade method. Finally optimized light-harvesting solid-state DSSCs is made using 3-D TCO where electron life time is controlled the recombination rate through fast charge collection and also ITO NWs length can be controlled in the range of over $2{\mu}m$ and has been characterized using field emission scanning electron microscopy (FE-SEM). Structural analyses by high-resolution transmission electron microscopy (HRTEM) and X-Ray diffraction (XRD) results reveal that the ITO NWs formed single crystal oriented [100] direction. Also to compare the charge collection properties of conventional NPs based solid-state DSSCs with ITO NWs based solid-state DSSCs, we have studied intensity modulated photovoltage spectroscopy (IMVS), intensity modulated photocurrent spectroscopy (IMPS) and transient open circuit voltages. As a result, above $4{\mu}m$ thick ITO NWs based photoelectrodes with Z907 dye shown the best performing device, exhibiting a short-circuit current density of 7.21 mA cm-2 under simulated solar emission of 100 mW cm-2 associated with an overall power conversion efficiency of 2.80 %. Finally, we achieved the efficiency of 7.5% by applying a CH3NH3PbI3 perovskite sensitizer.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.1
• /
• pp.1-35
• /
• 2007

In the last decades, the decrease in biological or chemical availability of sorbed contaminants as contact time passed, is generally accepted. This phenomenon so called as "aging" or "sequestration" is known to directly affect risk of the contaminats. This was observed for mainly for hydrophobic organic contaminants (HOCs), but also reported for heavy metals. Aging is known to be directly related to sorption-desorption hysteresis, irreversible sorption, desorption-resistance, nonequilibrium sorption, etc. The decrease in bioavailability due to aging or sequestration indicates realistic decrease in risk potential. Recently a risk-based management concept by scientific evidences but not the simple measurement of contaminant concentration has been attempted to determine environmentally acceptable remedial endpoint. This is because selection of remedial endpoint based on not total concentration but the bioavailability and toxicity of contaminants can reduce both the treatment cost and remedial activities of the contaminated sites. The bioavailability and toxicity of the residual contaminants are highly affected by the fate and transport and also directly affect the exposure pathways and bioaccumulation of contaminants in the living biota. In this paper, scientific feasibility on the risk-based clean-up and management of contaminated sites is reviewed.