• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권3호
• /
• pp.38-45
• /
• 2005

본 연구는 현장 관측정 자연표류 실험 (SWNDT, Single-Well Natural Drift Test) 을 이용하여 트리클로로에틸렌 (TCE, trichloroethylene) 으로 오염된 지하수의 생물학적 복원 가능성 조사 방법 및 결과 해석법을 제시하였다. 현장 SWNDT 실험에 사용한 용액은 일정 양의 추적자 (브롬이온), 생분해 기질 (톨루엔, 에틸렌, 용존산소, 질산성질소) 을 현장 지하수에 용해시켜 준비한다. 준비된 실험용액을 대수층에 주입하고, 주입 시 시료를 채취하여 추적자와 생 분해 기질들의 초기 농도를 측정한다 주업 후 시간에 따라서 시료를 채취하여 추적자, 생분해 기질, 생분해 부산물들의 농도를 측정한다. 현장 SWNDT 실험은 생분해 기질과 추적자의 상대적 거동을 평가하기 위한 Push-pull Transport Test (PPTT), 토착 미생물의 양과 활성도를 증가시키기 위한 Drift Biostimulation Test (DBT), 트리클로로에틸렌과 미생물 반응이 유사하리라 예상되는 기질을 시험하기 위한 Drift Surrogate Activity Test (DSAT) 순으로 진행되었다 SWNDT 실험 양수 시 추적자로 사용한 브롬이용의 농도변화 곡선은 톨루엔, 에틸렌, 용존산소, 질산성 질소 농도변화와 유사한 경향을 나타냈다. 즉 대수층에서의 생분해 기질들의 이송이 추적자와 유사함을 나타내는 결과이다. 토착 톨루엔산화 미생물의 존재를 톨루엔 농도의 감소에 따른 이산화탄소의 발생 및 용존산소 농도의 감소로 확인하였고, 그 톨루엔 산화 미생물은 트리클로로에틸렌 생분해 유사기질로 사용된 에틸렌을 분해하며, 부산물로 산화에틸렌 (ethylene oxide) 을 생성하였다. 이는 DBT 실험을 통하여 활성화된 톨루엔 분해 미생물이 트리클로로에틸렌 분해능이 있음을 나타낸다. 본 연구에서 제시한 현장 SWNDT 실험 방법 및 결과 해석 방법은 트리클로로에틸렌으로 대표되는 염화 지방족 탄회수소화합물(Chlorinated Aliphatic Hydrocarbons, CAHs)로 오염된 지하수의 생물학적 복원 타당성 평가를 위한 경제적이고 용이한 현장 실험 방법이다.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 한국토양환경학회지
• /
• 제2권3호
• /
• pp.3-21
• /
• 1997

기존에 개발된 토양 및 지하수 복원기술에는 막대한 비용과 시간이 필요하며, 실시후의 효과에 대한 예측이 어렵다. 자연내재복원기술(intrinsic remediation)은 해당 지역환경에서 자연발생되는 물리ㆍ화학ㆍ생물학적 과정을 통하여 오염물질을 감소시키는 원리를 이용하며, 인간이나 지역생태계에 허용할 수 있는 수준으로 환경을 복원함을 목표로 한다. 따라서 오염토양 및 지하수복원에 적용가능한 여러 기술과 비교하여 자연내재복원기술은 지역평가를 위한 초기비용은 높으나 전체적으로는 가장 경제적인 방법이다. 따라서 유해효과가 심각하여 긴급한 처리가 필요한 지역을 제외하고는 현재의 오염수준, 오염분포상태, 토지와 지하수 이용현황과 장래 계획에 따라 자연내재복원기술을 도입할 필요성이 있다. 본 연구는 자연내재복원기술의 적용가능성을 판단하기 위하여 생물학적 분해도(biodegradability)에 기초한 오염지역 사전평가과정을 제시하였다. 본 연구의 오염지역 사전평가과정은 기존 연구에 비하여 대상오염물질종류가 많고 다양한 지역범위를 포함함으로써 자연내재복원기술을 실용화시킬 수가 있다. 오염지역 사전평가과정은 1)예비지역조사 2)생물학적 분해도 관련자료 수집 및 평가 3)오염지역내 분해경로 선정 4)오염물질 운반과 거동 분석 5)모니터링계획 수립의 5단계로 진행된다. 1단계에서는 개략적 생물학적 분해도(rules of thumb concerning the biodegradability of organic com-pounds)에 기초한 상세조사의 계속진행여부와 오염지역자료를 이용하여 적절한 프로토콜을 결정한다. 2단계에서는 생물학적 분해도에 대한 광범위한 자료수집과 평가를 하며 3단계에서는 본 연구에서 제시한 경로중에서 오염지역에 맞는 경로를 선정한다. 4단계에서는 모델링을 위한 모델종류를 선정하여 예측하며 5단계는 자연내재복윈기술의 적용여부를 판단하여 모니터링계획을 수립하는 단계이다. 본 연구의 오염지역 사전평가과정은 사용자에게 자연내재복원기술을 이용하기 위한 합리적이고 체계적인 판단과정을 제공하여 줄 것이다. 또한 사전평가 결과 오염지역이 자연내재복원기술적용이 불가능하다고 평가되어도 이미 수집된 자료와 정보는 다른 복원기술을 선정하기 위한 기초자료로서 사용가능하다.

• 한국해양환경ㆍ에너지학회지
• /
• 제20권1호
• /
• pp.26-36
• /
• 2017

지구온난화를 방지하기 위해 대량의 $CO_2$를 감축 시킬 수 있는 해양 CCS(Carbon dioxide Capture and Storage) 실증 및 상용화를 국내에서 준비 중이다. 해양 CCS 사업은 해양내 심부 퇴적층을 대상으로 대규모 $CO_2$를 수송, 주입, 저장하는 기술로써, 누출 등의 사고 발생 시 인명, 환경, 재산 등에 큰 피해를 야기할 잠재적 가능성을 가지고 있다. 따라서 해양 CCS 사업 안전성을 확보하기 위해서는 생애주기에 걸쳐서 유 가스 생산 해양플랜트에 준하는 엄격한 HSE(Health, Safety and Environment) 관리 방안이 요구된다. 하지만 국내에는 CCS 사업에 적용 가능한 HSE 법 또는 규정이 없을 뿐만 아니라 관련 연구도 미비한 상황이다. 이에 본 연구에서는 국외 해양플랜트 관련 HSE 관리 방법론, 해양 CCS HSE 관리 가이드라인 및 국외 사례를 분석하고, 이를 통하여 국내에서 해양 CCS를 추진시 HSE 관리 프레임워크 구축에 필요한 요구사항을 도출하였다. 이를 위해 본 연구에서는 먼저 범용적으로 활용되는 위험 관리방법론인 ISO 31000에 대한 분석을 수행하였다. 또한 해양플랜트 HSE 관리체계를 체계적으로 구축 운영 중인 노르웨이와 영국의 해양 CCS HSE 관리가이드라인 및 적용사례를 각각 분석하였다. 이를토대로 국내에서 해양 CCS 사업 추진시 HSE 관리 프레임워크 구축을 위해 우선적으로 수행해야할 사항으로 HSE Philosophy의 작성의 필요성을 피력하였고 생애주기 단계에 따른 HSE 관리 프로세스를 제안하였다. 본 논문에서 제안한 HSE 관리 프레임워크를 통해 국내 해양 CCS 실증 사업 추진시 기획 설계 단계부터 HSE 관리를 한다면 보다 안전하고 체계적인 사업을 이행할 수 있을 것으로 기대된다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1246-1246
• /
• 2001

The quality of meat is highly variable in many properties. This variability originates from both animal production and meat processing. At the pre-slaughter stage, animal factors such as breed, sex, age contribute to this variability. Environmental factors include feeding, rearing, transport and conditions just before slaughter (Hildrum et al., 1995). Meat can be presented in a variety of forms, each offering different opportunities for adulteration and contamination. This has imposed great pressure on the food manufacturing industry to guarantee the safety of meat. Tissue and muscle speciation of flesh foods, as well as speciation of animal derived by-products fed to all classes of domestic animals, are now perhaps the most important uncertainty which the food industry must resolve to allay consumer concern. Recently, there is a demand for rapid and low cost methods of direct quality measurements in both food and food ingredients (including high performance liquid chromatography (HPLC), thin layer chromatography (TLC), enzymatic and inmunological tests (e.g. ELISA test) and physical tests) to establish their authenticity and hence guarantee the quality of products manufactured for consumers (Holland et al., 1998). The use of Near Infrared Reflectance Spectroscopy (NIRS) for the rapid, precise and non-destructive analysis of a wide range of organic materials has been comprehensively documented (Osborne et at., 1993). Most of the established methods have involved the development of NIRS calibrations for the quantitative prediction of composition in meat (Ben-Gera and Norris, 1968; Lanza, 1983; Clark and Short, 1994). This was a rational strategy to pursue during the initial stages of its application, given the type of equipment available, the state of development of the emerging discipline of chemometrics and the overwhelming commercial interest in solving such problems (Downey, 1994). One of the advantages of NIRS technology is not only to assess chemical structures through the analysis of the molecular bonds in the near infrared spectrum, but also to build an optical model characteristic of the sample which behaves like the “finger print” of the sample. This opens the possibility of using spectra to determine complex attributes of organic structures, which are related to molecular chromophores, organoleptic scores and sensory characteristics (Hildrum et al., 1994, 1995; Park et al., 1998). In addition, the application of statistical packages like principal component or discriminant analysis provides the possibility to understand the optical properties of the sample and make a classification without the chemical information. The objectives of this present work were: (1) to examine two methods of sample presentation to the instrument (intact and minced) and (2) to explore the use of principal component analysis (PCA) and Soft Independent Modelling of class Analogy (SIMCA) to classify muscles by quality attributes. Seventy-eight (n: 78) beef muscles (m. longissimus dorsi) from Hereford breed of cattle were used. The samples were scanned in a NIRS monochromator instrument (NIR Systems 6500, Silver Spring, MD, USA) in reflectance mode (log 1/R). Both intact and minced presentation to the instrument were explored. Qualitative analysis of optical information through PCA and SIMCA analysis showed differences in muscles resulting from two different feeding systems.

• Nuclear Engineering and Technology
• /
• 제47권4호
• /
• pp.479-487
• /
• 2015

The thallium-doped sodium iodide [NaI(Tl)] scintillation detector is preferred as a gamma spectrometer in many fields because of its general advantages. A silicon photomultiplier (SiPM) has recently been developed and its application area has been expanded as an alternative to photomultiplier tubes (PMTs). It has merits such as a low operating voltage, compact size, cheap production cost, and magnetic resonance compatibility. In this study, an array of SiPMs is used to develop an NaI(Tl) gamma spectrometer. To maintain detection efficiency, a commercial NaI(Tl) $2^{\prime}{\times}2^{\prime}$ scintillator is used, and a light guide is used for the transport and collection of generated photons from the scintillator to the SiPMs without loss. The test light guides were fabricated with polymethyl methacrylate and reflective materials. The gamma spectrometer systems were set up and included light guides. Through a series of measurements, the characteristics of the light guides and the proposed gamma spectrometer were evaluated. Simulation of the light collection was accomplished using the DETECT 97 code (A. Levin, E. Hoskinson, and C. Moison, University of Michigan, USA) to analyze the measurement results. The system, which included SiPMs and the light guide, achieved 14.11% full width at half maximum energy resolution at 662 keV.

• Journal of Radiation Protection and Research
• /
• 제45권3호
• /
• pp.130-141
• /
• 2020

Background: Concrete activation in cyclotron vaults is a major concern associated with their decommissioning because a considerable amount of activated concrete is generated by secondary neutrons during the operation of cyclotrons. Reducing the amount of activated concrete is important because of the high cost associated with radioactive waste management. This study aims to investigate the capability of the neutron absorbing materials to reduce concrete activation. Materials and Methods: The Particle and Heavy Ion Transport code System (PHITS) code was used to simulate a cyclotron target and room. The dimensions of the room were 457 cm (length), 470 cm (width), and 320 cm (height). Gd₂O₃, B₄C, polyethylene (PE), and borated (5 wt% ^natB) PE with thicknesses of 5, 10, and 15 cm and their different combinations were selected as neutron absorbing materials. They were placed on the concrete walls to determine their effects on thermal neutrons. Thin B₄C and Gd₂O₃ were placed between the concrete wall and additional PE shield separately to decrease the required thickness of the additional shield, and the thermal neutron flux at certain depths inside the concrete was calculated for each condition. Subsequently, the optimum combination was determined with respect to radioactive waste reduction, price, and availability, and the total reduced radioactive concrete waste was estimated. Results and Discussion: In the specific conditions considered in this study, the front wall with respect to the proton beam contained radioactive waste with a depth of up to 64 cm without any additional shield. A single layer of additional shield was inefficient because a thick shield was required. Two-layer combinations comprising 0.1- or 0.4-cm-thick B₄C or Gd₂O₃ behind 10 cm-thick PE were studied to verify whether the appropriate thickness of the additional shield could be maintained. The number of transmitted thermal neutrons reduced to 30% in case of 0.1 cm-thick Gd₂O₃+10 cm-thick PE or 0.1 cm-thick B₄C+10 cm-thick PE. Thus, the thickness of the radioactive waste in the front wall was reduced from 64 to 48 cm. Conclusion: Based on price and availability, the combination of the 10 cm-thick PE+0.1 cmthick B₄C was reasonable and could effectively reduce the number of thermal neutrons. The amount of radioactive concrete waste was reduced by factor of two when considering whole concrete walls of the PET cyclotron vault.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
• /
• pp.27-31
• /
• 2006

GNSS Services and Applications are today in permanent evolution in all the market sectors. This evolution comprises: ${\bullet}$ New constellations and systems, being GALILEO probably the most relevant example, but not the only one, as other regions of the world also dwell into developing their own elements (e.g. the Chinese Beidou system). ${\bullet}$ Modernisation of existing systems, as is the case of GPS and GLONASS ${\bullet}$ New Augmentation services, WAAS, EGNOS, MSAS, GRAS, GAGAN, and many initiatives from other regions of the world ${\bullet}$ Safety of Life services based on the provision of integrity and reliability of the navigation solutions through SBAS and GBAS systems, for aeronautical or maritime applications ${\bullet}$ New Professional applications, based on the unprecedented accuracies and integrity of the positioning and timing solutions of the new navigation systems with examples in science (geodesy, geophysics), Civil engineering (surveying, construction works), Transportation (fleet management, road tolling) and many others. ${\bullet}$ New Mass-market applications based on cheap and simple GNSS receivers providing accurate (meterlevel) solutions for daily personal navigation and information needs. Being on top of this evolving market requires an active participation on the key elements that drive the GNSS development. Early access to the new GNSS signals and services and appropriate testing facilities are critical to be able to reach a good market position in time before the next evolution, and this is usually accessible only to the large system developers as the US, Europe or Japan. Jumping into this league of GNSS developers requires a large investment and a significant development of technology, which may not be at range for all regions of the world. Bearing in mind this situation, MAGIC appears as a concept initiated by a small region within Europe with the purpose of fostering and supporting the development of advanced applications for the new services that can be enabled by the advent of SBAS systems and GALILEO. MAGIC is a low cost platform based on the application of technology developed within the EGNOS project (the SBAS system in Europe), which encompasses the capacity of providing real time EGNOS and, in the near future, GALILEO-like integrity services. MAGIC is designed to be a testing platform for safety of life and liability critical applications, as well as a provider of operational services for the transport or professional sectors in its region of application. This paper will present in detail the MAGIC concept, the status of development of the system within the Madrid region in Spain, the results of the first on-field demonstrations and the immediate plans for deployment and expansion into a complete SBAS+GALILEO regional augmentation system.

• 한국지역사회생활과학회지
• /
• 제17권1호
• /
• pp.123-139
• /
• 2006

The purpose of this study is to search how to promote health and improve nutrition and health care of the elderly people in rural area. Behaviors for health promotion and habits against health risk were surveyed. Dietary management was analyzed for surveyed nutrient intake by 24 hr -recall method. 242 subjects were collected in 12 cities or counties in Gyeonggi Province and 20 elderly people (10 male and 10 female) were selected out of 1 village in each district. Questionnaire for health behavior and dietary management was carried out by trained interviewers. Statistical analyses were made by SAS (version 8.1) and Chi-square tests and General Linear Models were used. Characteristics of the elderly people were 61-74 year-olds (68.2%), elementary school educated (78.4%), with spouse (51.7%), monthly living cost of 500-1,000 thousand won(43.4%), and monthly pocket money of 50-100 or 100-200 thousand won(33.5%, 26.5%). 41.4% of the subjects checked up medical examination regularly. The alcohol drinking status was significantly different according to gender: high no-drink rate of female (52.5%) and low no-drink rate of male (25.6%). Kinds of disease were different according to gender: higher proportion of cardiovascular disease(46.3%) and diabetes mellitus(8.1 %) in male and joint lumbago neuralgia(44.4%) and osteoporosis(8.6%) in female. Gastrointestinal complaints were nausea (69.0%) and chronic indigestion (17.8%). Constipation (12.0%) and vomiting (4.3%) were more frequent in female. Dietary management was good (3 meals per day: 93.4%., dining with family: 72.4%, regular mealtime: 72.4%, and 3-4 times of snacks per week: 44.9%) except side dish taking of 3-4 kinds only. However, almost one-third of the female elderly ate alone (30.6%) which was well compared with one-fifth of the male (19.7%). And food and nutrients intake were not significantly different according to gender except that male elderly's intake of energy and protein was lower than that of female's. The surveyed subjects had no difficulties in Activities of Daily Living (ADL), but some female elderly had some difficulties with Instrumental Activities of Daily Living (IADL) like working at home, using transport, and going shopping. These results suggest that low quality of life linked with low economic status of the rural elderly and that congregate meal at village hall would be required for the female elderly eating alone. For the undernourished male elderly, it would be needed to provide snacks and to establish nutrition and health surveillance system.

• 한국항만학회지
• /
• 제11권2호
• /
• pp.321-337
• /
• 1997

Rapid change in the technological environment of marine transportation and the development of the ocean shipping industry have fostered a revolution in the port system. This in turn has caused major changes in the function and use of port in Korea. Aside from this. Mokpo Port, however continues to decline, because the existing port facilities and related subsystem are already obsolete with no chance of regaining operational effectiveness and treatment for proper implementation. Although a few studies have been done on the Mokpo Port, has not been found, any reseach for the analytical approach to the transportation system of it. This paper aims to make an extensive analysis of the physical distribution system in Mokpo Port focusing on the coordination of subsystems such as navigational aids system, quay handling and transfer system, storage system and inland transport system. The base of introduced simulation tool here is the queueing theory. The overall findings are as follows; 1. Among those vessels called at Mokpo Port in 1994, the average size of oceangoing vessels is 4,922.1 G/T, and the domestic is 317.8 G/T. The average arrival interval and service time of the domestic vessels are 6.0 hours and 24.1 hours respectively marking the berth occupation rate over 100%. Those for oceangoing vessels are 34.5 hours, 120.0 hours and 37.2%. In order to maintainin the berth occupation rate to 70% the capacity considering the 1994 of domestic piers must be extended to 145% and oceangoing vessels must be increased to 165% year called. 2. The capacity of approaching channel is enough to handle the total traffic volume. 3. Tugs are sufficiently being provided to handle all ships requiring their services 4. The capacity of storage and inland transportation systems are sufficient to handle the throughput and the yard stroage utilization rate of No.1 $\cdots$ No.5 is 4.5% and No.6 1S 30% of 1993's. 5. The utilization rate of LLc(Level Looping Crane) and PNT(PNeumaTic) are 2.7% and 18.8%, respectively. Practical solution and proposal for improvement of Transportation System in Mokpo Port are as follows; 1. To avoid the congestion in domestic pier introduction of a new port operation system is necessary allowing the domestic vessel to use the oceangoing pier. 2. To establish the port management information system to improve the efficiency of port operation. 3. To build a new storage system for high valued cargos including modernization of the present storage and handling system. 4. To insure the safety of navigation in approaching channel, The Vessel Traffic System including separation scheme is introduced. 5. To interest enormously on public relation to ship owner's association, shippers and consignees by showing that they can save cost and ship turnaround time in order to promote the call to Mokpo Port. At last, to be strategically change the function of Mokpo Port to the Leisure, Fishing & Ferry as well as Maritime port.