• 한국건설관리학회논문집
• /
• 제13권1호
• /
• pp.44-52
• /
• 2012

합리적인 방법에 의해 결정된 건설 공사비를 포함하여 계약을 체결하는 것은 공공 건설공사의 사업비 관리 측면에서 매우 중요하다. 국내에서는 건설 공사비를 산정하는 기준으로 표준품셈이 사용되고 있지만, 표준품셈에서 제시하는 품의 적정성에 대해서 문제가 제기되고 있으며, 현장의 자원 투입량과 품셈에서 제시하는 자원 투입량의 차이로 합리적이고 효율적인 공사비를 산정하는데 어려움이 있다. 본 연구에서는 건설 공사비를 합리적으로 산정하기 위하여, 공동주택 거푸집 공사의 생산성 분석을 통한 작업조 기반의 Cost Data Prototype을 제시하였다. 특히, CYCLONE 모델은 민감도 분석을 통해 최적의 작업인원을 제시하는 모델이므로, 거푸집 공사의 다양한 작업공간과 작업인원을 대상으로 생산성을 분석할 수 있는 도구로 활용이 가능하다. 그리고 개발된 회귀식은 거푸집 공사의 작업인원을 독립변수로 하여, 필요한 작업량을 종속변수로 예측하는데 활용이 가능할 것이다.

• Child Health Nursing Research
• /
• 제12권1호
• /
• pp.15-24
• /
• 2006

Purpose: This study was done to define nursing behavior in neonatal intensive care units so as to estimate resource-based relative value-. Method: Participating in this study were 292 nurses in neonatal intensive care units. The study surveyed physical and mental labor, stress and time involved in nursing work. Tool used in this study was a nursing labor per relative value tool. For analyzes, the relative value of each nursing behavior was calculated, where the mean value of the three components, labor intensity and component-by-component explanatory power were in percentage terms. Results: 1. Nursing behaviors in neonatal intensive care unit were classified and defined at three levels: 5 main domains, 17 mid-domains, and 42 small domains. 2. The per component explanatory power of intensity involved in nursing labor showed physical effort to be 32.45%, mental 32.86%, and stress 34.69%. 3. The reliability of nursing labor factors was very strong, Cronbach's alpha value of 0.96. Conclusion: In this research, which is a first in defining nursing behavior in neonatal intensive care units, individual nursing behavior were broken down using resource-based relative value for nursing cost, and each nursing behavior was successfully translated to a numerical value.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.640-648
• /
• 2022

In the United States, the Safety Rest Areas (SRAs) were introduced as highway roadside infrastructures in the early 1900s. The State Departments of Transportation (DOTs) operate/maintain their SRAs using different methods. The Washington DOT used the in-house workforce method for over 20 years, whereas some states moved to Performance-Based Contracting (PBC) from the in-house workforce to save cost primarily. Several existing studies claimed that using the PBC approach saved costs on several highway assets. Thus, the principal objective of this study is to compute and compare the unit operating/maintenance cost of SRAs using the in-house workforce method (in Washington state) with the PBC approach (in other states). The findings of this study show that the average annual cost using the PBC approach was much more than the average annual cost using the in-house workforce approach. The findings also show that in Washington state, the 'Labor Cost' category was a key expenditure, which is statistically higher than other categories. The 'Labor Cost' was followed by the 'Other Services', and then 'Materials and Supplies' and 'Equipment.' The study's findings indicated that outsourcing does not always save costs for agencies. The study findings may help transportation construction/maintenance professionals select a cost-effective approach for their future planning.

• 대한치과보철학회지
• /
• 제52권1호
• /
• pp.18-26
• /
• 2014

연구 목적: 본 연구의 목적은 가장 최근에 수행된 치과의원의 경영 분석 자료를 바탕으로 상향식 방법을 적용하여 임플란트 원가를 산정하는데 있다. 연구 재료 및 방법: 본 연구에서는 진료행위 각각에 소요되는 직간접 비용을 모두 합산하는 상향식 방식으로 산출하였다. 상향식 원가계산의 경우 총원가는 인건비, 재료비, 관리비, 의료사고비용, 투자자본의 기회비용 등으로 구성이 된다. 이를 임플란트 원가 구성요소로 구분하면 인건비, 기공료, 재료비, 감가상각비 등의 직접비용과 관리운영비를 포함하는 간접비용, 치과의원 투자분에 대한 기회비용으로 구성된다. 결과: 상부보철물의 종류에 따라 금속관일 경우 1,449천원, 도재관일 경우 1,583천원, 오버덴쳐의 경우 2,471천원으로 산정되었다. 임플란트 원가는 인건비, 재료비, 관리비, 기타비용으로 나누어지는데 총 원가 중 인건비가 차지하는 비율은 50%, 재료비 33%, 관리비 15%, 기타비용2%로 나타났다. 이를 직접비, 간접비, 투자비용으로 구분하면 상부 보철물이 금속관일 경우 각각 원가의 83%, 15%, 2%를 차지한다. 결론: 전체 원가 중 인건비가 73만원(약 50%)으로 가장 많은 비중을 차지한다. 상향식 원가계산 결과 관행수가에 근접하게 나타났는데 금속관의 경우 145만원, 도재관일 경우 158만원 추계되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.70-71
• /
• 2018

The labor cost on construction project of Korea is calculated based on the Wage Rate in Construction of Korea which is published by Construction Association of Korea. The Wage Rate in Construction of Korea does not have any variation on the wage following skill level of labor although it has 123 work categories. In addition, the classification on skill level and career of construction labor in Korea does not defined. Therefore, to establish the concept of the classification on skill level and career of construction labor, this study aim to compare the difference between Wage Rate in Construction of Korea with Award system which present grade on skilled labor.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.103-104
• /
• 2015

Process management of reinforced concrete construction that many labor quantity and cost is put at a construction site is very important and gives a lot of influence on the subsequent process. Thus, there will be only used as a useful tool for process control by medical facilities and trend analysis of the flow of the process by the amount of labor input and productivity in reinforced concrete construction. productivity by type and quantity, and comparative analysis. In addition, it is necessary to calculate the standard of estimate and real commitment to labor productivity by type and quantity, and comparative analysis.

• Journal of Preventive Medicine and Public Health
• /
• 제32권3호
• /
• pp.317-324
• /
• 1999

Objectives: Since 1991, nationwide massive neonatal screening program for phenylketonuria (PKU) and congenital hypothyroidism have been performed in Korea. As in many other countries, efficiency of this program has not been definitely concluded. For the purpose of evaluation of this program, from the perspective of efficiency, a cost-benefit analysis was carried out. Methods: Costs of the detection and the treatment program were compared with the projected benefit(avoided costs) that results from the prevention of the mental retardation associated with the disorders due to PKU and hypothyroidism. Costs and benefits were discounted at an annual rate of 5%, and duration of life-long labor was assumed to be 30 years. Cost and benefit were estimated based on the detection rates of one case of PKU per 5,572 and one case of congenital hypothyroidism per 32,554 babies screened during 1991-1997. Results: The benefit-cost ratio was 0.418. The sensitivity analysis for the discount rates and labor durations showed that most cost-benefit ratios were lower than one(1.0) except when discount rate was changed to 3% and detection rate to two- or threefold and/or labor duration to 40 years. Conclusion: The result of this study suggested that present program of mass screening for PKU and congenital hypothyroidism could not be justified in terms of efficiency. It doesn't coincide with the results of previous studies in major developed countries, presumably because of difference in detection rates and welfare cost for the disabled.

• 가정∙방문간호학회지
• /
• 제7권1호
• /
• pp.26-38
• /
• 2000

The purpose of this study was to estimate home care nursing cost for the patient with Cerebrovascular Disease based on a bundle of home care nursing services This study was conducted through four steps. The first step was to investigate home care nursing activities that were offered to the patient with Cerebrovascular Disease(CD) by home care nurse. The second step was to investigate the time spent on home care nursing service and to calculate labor and manufacturing cost. The third step was to calculate home care nursing cost per minute. And at the fourth step, home care nursing cost for a patient with Cerebrovascular Disease based on a bundle of home care nursing service was calculated. The results of the study were as follows: 1) The number of direct home care nursing activities for the patient with CD was 108, and the time of each activity was spent from 1 to 10 minutes. 2) Average time per visit was 51 minute, and the firs visit time were spent 1.6 times higher than 2nd visit time. 3) Nursing cost per minute(cost per visit ${\\}\;22,565\;\div\;$ average time per visit 51 minutes) was ${\\}\;442$. The cost per visit was calculated on Basic visiting cost(nurse's labor cost ${\\}\;15,760$ + management cost ${\\}\;6,805$) divided by average time per visit(51 minutes). 4) Home care nursing cost to the patient with CD based on bundle of home care nursing service was consisted of basic home care nursing cost, the cost of a bundle of service practiced on visit. and transportation fee. Basic home nursing cost(the time spent on basic home nursing service 20 minutes ${\times}$ nursing cost per minute ${\\}\;442$) was ${\\}\;8,840$. The cost of the bundle of home care nursing services to the patient with CD was calculated as self care ${\\}\;2.898$, Tracheostomy care ${\\}\;10,166$, immobility care ${\\}\;6,188$, sore care ${\\}\;6,188$. Foley care ${\\}\;6,630$, and Levin tube or Gastrostomy care ${\\}\;7.514$. Transportation fee which was composed of the labor cost for transportation(${\\}\;5,122$) and the car management cost(${\\}\;3.876$) was ${\\}\;8,998$. Home care nursing cost to the patient with CD based on bundle of home care nursing services consisted of basic home care nursing cost, the cost of a bundle of service practiced on visit, and transportation fee. It will contribute to improve quality of home care service, because of giving appreciate incentives to home care nurses. And it will be more efficient than current cost of hospital based home care. But it need to management than calculation of the current fee-for-services of home care.

• 한국병원경영학회지
• /
• 제26권1호
• /
• pp.71-82
• /
• 2021

Purpose: The purpose of this study is to estimate incomes and costs of the medical clinics by using secondary data. Methodology: The medical incomes and costs were estimated from 405 clinics operated by sole practitioner providing out-patient services among all clinics subject to the Medical Cost Survey on National Health Insurance Patients in 2017, excluding dental clinics and oriental medical clinics. The incomes and costs of the medical clinics were reflected with incomes and costs of health insurance benefits and were calculated by types of medical services (i.e., basic care, surgery, general treatment, functional test, specimen test and imaging test). The costs were classified as follows: labor costs, equipment costs, material costs and overhead costs. Secondary data was used to estimate the incomes and costs of the medical clinics. For allocation bases for costs for each type of the medical service, the ratio of revenue from health insurance benefits by types of medical services was applied. However, labor costs were calculated with the activity ratio by types of medical services and occupations, using clinical expert panel data. Finding: The percentage of health insurance income for all medical income was 73.1%. The health insurance cost per clinic was 401,864 thousand won. Labor cost accounted for the largest portion of the health insurance income was 191,229 thousand won (47.6%), followed by management cost was 170,018 thousand won (42.3%), materials cost was 35,434 thousand won (8.8%), and equipment costs was 5,183 thousand won (1.3%). Practical Implications: This study suggests a method of estimating incomes and costs of medical clinic services by using secondary data. It could efficiently provide incomes and costs to assess an appropriate level of the health insurance fee to the clinics.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.135-142
• /
• 2001

This study is for the investigation of form using the aluminum-compound metal frame(Aluminum frame reinforced panel : AFR panel) which is improved in the capacity in the wall-concrete structure in steal of using the existing form which has problems such as, excessive exposure of cement, the loss of labor when it is constructed or disjointed, and it's economical efficiency compared with that of EURO Form. AFR panel passes the KS F 8006 test, and as a result of field test, it's displacement is satisfied with Specification. And using AFR panel is more economical than that of EURO Form because saving labor cost which plays a major part in cost saving in formwork is more effective in retrenching total cost than increment of material cost.