• 전기의세계
• /
• 제35권3호
• /
• pp.146-152
• /
• 1986

ISDN을 모르고 통신의 내일을 말한다는 것이 멋적을 정도로 ISDN만큼 오늘의 통신기술에서 뚜렷하게 부각된 milestone은 없다. 전화망의 발전은 정보량의 확대를 유발하였고 많은 정보량을 필요로 하는 대형기업체들은 고속의 circuit 또는 packet switching을 이용한 사설 network을 구성하여 이들 정보를 처리해 왔다. 그러나 digital기술의 cost down은 이들 business service를 residential service로 확장시킬수 있는 계기를 제공하여 비음성 정보 service를 voice용 기존 network에 그대로 integration하려는 노력이 ISDN이라는 이름으로 구체화되기 시작하였다. 본고에서는 ISDN의 도래와 함께 통신 서비스, network, system등이 어떻게 변천해 갈 것인지를 개관하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.533-534
• /
• 2008

By using Dual Port DRAM to Multi-media SoC, an improved performance is achieved in this paper. The proposed scheme greatly help the multi-media SoC like a application for full HDTV, and it can be extended to the application field which is needed the low access latency with heavy traffic. Additionally, the proposed scheme help to down the BUM cost of system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.181-182
• /
• 2008

In this paper, an cost-effective system architecture is proposed to implement digital predistortion scheme for linearizing the PA amplifing TDD wideband signal. To make digital predistorted signal for compensating nonlinearity of PA, a dedicated ADC and a frequency-down converter are necessary. Proposed scheme is based on the TDD feature that the RF receiver frontend is idle state during the downlink signal processing time and utilize them to make the digital predistorted signal for PA.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.943-946
• /
• 1999

In this paper, we present a new clock routing algorithm which minimizes total wirelength under any given path-length skew bound. The algorithm onstructs a bounded-skew tree(BST) in two steps:(ⅰ) a bottom-up phase to construct a binary tree of shortest-distance feasible regions which represent the loci of possible placements of clock entry points, and (ⅱ) a top-down phase to determine the exact locations of clock entry points. Experimental results show that our clock routing algorithm, named BST/DME, can produce a set of solutions with skew and wirelength trade-off.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1924-1929
• /
• 2010

In long tunnel If we reduce the length of system height on catenary system, tunnel construction cost is cut down. It is because of tunnel section curtailment. So that we have review reduction of system height according to tunnel section. We have designed reduction of system height considered characteristics of overhead contact systems within UIC 799 code.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.40-44
• /
• 1998

In this study, the subframe of passenger car is developed by typical analysis and carsh simulations. According this results, energy absorption and barrier froce is very important to control passenger safety and deformation shape. For that purpose, it is most effective to absorb energy more tailor welded blanks(TWB) subframe than non-TWB. The subframe with TWB is simulated, in which reduced stamping parts, weight reduction and cost down.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.1047-1052
• /
• 2003

The purpose of this study is to improve the productivity and constructability of permanent forms. The permanent forms will cut down the cost of production and make easier to install in the field; hence increase the use of forms in the today's market. The permanent form is produced in the factory and built in field. So this study is in two parts. The one is the productivity in factory, the other is constructability in the field. This study is the designing a new mold system as a solution to existing mold system's problems.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.161-161
• /
• 2000

The clean mobile robot for wafer transfer is AGV that carry each wafer to each equipment. It has wafer handling technology, wafer ID recognition technology, position calibration technology using vision system, and anti-vibration technology. Wafer loading/unloading working accuracy is within ${\pm}$1mm, ${\pm}$3$^{\circ}$. By application of this AGV, we can reduce the manufacturing tack time and bring cost down of equipment.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.160-160
• /
• 2000

An optimization approach is used to solve the division problem of working area, and a cost function is defined to represent the constraints on the solution, which is then mapped onto the Hopfield neural network for minimization. Each neuron in the network represents a possible combination among many components. Division is achieved by initializing each neuron that represents a possible combination and then allowing the network settle down into a stable state. The network uses the initialized inputs and the compatibility measures among components in order to divide working area.

• 품질경영학회지
• /
• 제19권2호
• /
• pp.108-116
• /
• 1991

Value Engineering has been recognized by many companies as a powerful and innovative techniques approach for cost down and improvement in function of product and service. Functional evaluation is the most important progress in VE activities. But it is often difficult to evaluate the function of a certain subject because the evaluation of function is very vague. This paper presents a new functional evaluation method using fuzzy theory. The purpose of this proposed method is the improvement in the precision of functional evaluation.